Connect the modem to power and your internet line

Start by placing your CenturyLink modem in a central location in your home—ideally near where you spend the most time online, and away from metal objects, microwaves, or thick walls that can weaken the signal. Plug the power cable into the modem, then into a wall outlet. Wait 30 to 60 seconds for the lights on the front to stop blinking and settle into a steady pattern.

Next, take the cable that came from your wall jack (the one labeled "Internet" or "Line") and plug it into the port on the back of the modem labeled "DSL" or "Internet." Do not plug it into the phone ports. If you have a phone line through CenturyLink, you can connect that to one of the phone ports on the modem after the internet is working.

The modem will take another 2 to 3 minutes to fully boot up. You will see the lights change—usually a power light stays solid, and an internet or DSL light will turn solid green when the connection is active. If the DSL light stays red or off after 5 minutes, unplug the modem, wait 10 seconds, and plug it back in.

Key Takeaways

  • Place the modem in a central location away from metal objects and thick walls, then plug in power and connect the DSL cable from your wall jack.
  • Wait 3 to 5 minutes for the modem to fully boot; the DSL light should turn solid green when the connection is active.
  • Connect your computer or router to the modem using an ethernet cable or by finding the modem's WiFi network on your device.
  • Log into the modem's settings page at 192.168.0.1 or 192.168.100.1 using the username and password printed on the modem's label.
  • If you cannot connect after 10 minutes, restart the modem and check that the DSL cable is fully seated in the port.

Connect a device using ethernet or WiFi

Once the DSL light is solid green, you can connect to the internet. For the fastest and most stable connection, use an ethernet cable: plug one end into any of the numbered ports on the back of the modem (usually labeled 1, 2, 3, or 4) and the other end into your computer or device. Your device should recognize the connection within 10 to 15 seconds.

If you prefer wireless, look for the WiFi network name (also called SSID) printed on a sticker on the bottom or back of the modem. Open your device's WiFi settings, find that network name in the list, and select it. When prompted for a password, enter the WiFi password also printed on the sticker. Your device will connect within 30 seconds.

Test your connection by opening a web browser and visiting any website. If the page loads, your modem is working. If it does not load after 30 seconds, restart your device and try again.

Log into the modem settings page

To change your WiFi password, check your connection speed, or troubleshoot problems, you need to access the modem's settings page. Open a web browser and type 192.168.0.1 or 192.168.100.1 into the address bar, then press Enter. One of these addresses will open the login page.

The username is usually admin and the password is printed on the sticker attached to the modem. If you have changed the password before and do not remember it, you will need to reset the modem (see the troubleshooting section below). Enter the username and password, then click Log In.

Once logged in, you can see your connection status, change your WiFi name and password, restart the modem, and view other settings. Most CenturyLink modems have a straightforward dashboard that shows whether your connection is active and how fast it is running.

Change your WiFi password

The WiFi password printed on the modem's sticker is find, but you may want to change it to something easier to remember. Log into the settings page at 192.168.0.1 or 192.168.100.1, then look for a section labeled "WiFi," "Wireless," or "Network Settings."

Find the field for WiFi password (sometimes called "Pre-Shared Key" or "PSK") and enter a new password. Most modems require passwords to be at least 8 characters long and include a mix of letters, numbers, and symbols. Write down your new password before you save it. Click Save or explore, and the modem will restart—this takes 1 to 2 minutes.

After the restart, your old WiFi password will no longer work. You will need to reconnect all your devices using the new password. Go to each device's WiFi settings, forget the old network, find the network name again, and enter the new password.

Restart or reset the modem

If your internet stops working or becomes very slow, a restart often fixes the problem. Unplug the power cable from the back of the modem, wait 10 seconds, then plug it back in. The modem will take 3 to 5 minutes to fully restart. Do not unplug it during this time.

If restarting does not work and you need to reset the modem to factory settings, look for a small reset button on the back of the modem, usually recessed so you cannot press it by accident. Use a paperclip or the tip of a pen to press and hold the button for 10 to 15 seconds while the modem is powered on. The lights will flash, and the modem will restart. This erases all your settings, including your WiFi password, so you will need to set everything up again from the beginning.

Troubleshoot common connection problems

If the DSL light stays red or off after 10 minutes, first check that the DSL cable is fully plugged into both the wall jack and the modem's DSL port. Push the cable in firmly at both ends. If the light is still red, unplug the modem, wait 30 seconds, and plug it back in. If it remains red after another 5 minutes, the issue may be with your CenturyLink line itself—contact CenturyLink support to check whether there is an outage in your area.

If the DSL light is green but you cannot connect to the internet, restart your device and try again. If that does not work, log into the modem settings page and look for a "Restart" or "Reboot" button, then click it. Wait 3 to 5 minutes for the modem to restart.

If your WiFi is very slow or keeps disconnecting, move the modem away from walls, metal objects, and other electronics. Microwaves, cordless phones, and baby monitors can interfere with WiFi. You can also try changing the WiFi channel in the modem settings—look for a "Channel" or "Wireless Channel" option and try a different number (1, 6, or 11 are usually best for 2.4 GHz networks).

Frequently Asked Questions

How long does it take for the modem to fully connect after I plug it in?

The modem usually takes 3 to 5 minutes to fully boot and connect to CenturyLink's network. The DSL light will turn solid green when the connection is active. If it is still blinking or red after 10 minutes, restart the modem by unplugging it for 10 seconds and plugging it back in.

Can I use my own router with the CenturyLink modem?

Yes. Connect an ethernet cable from one of the numbered ports on the modem to the internet port on your router. Then set up your router according to its instructions. This gives you better WiFi range and more control over your network settings.

What should I do if I forgot my WiFi password?

The WiFi password is printed on the sticker attached to the modem. If you changed it and cannot remember the new password, you will need to reset the modem to factory settings by holding the reset button for 10 to 15 seconds. This erases all your settings, so you will need to set up the WiFi password again from the beginning.

Why is my internet speed much slower than what I pay for?

Move the modem to a central location away from walls and metal objects. Restart the modem by unplugging it for 10 seconds. Check that the DSL cable is fully seated in the port. If the speed is still slow, log into the settings page and look for a connection speed or line speed display to see what speed the modem is actually getting from CenturyLink.

Do I need to set up a phone line if I have CenturyLink phone service?

No, not right away. Set up the internet first by connecting the DSL cable. Once that is working, you can plug your phone line into one of the phone ports on the modem if you have CenturyLink phone service. The phone and internet can run at the same time on the same modem.