Get Your Modem and Router Connected in Four Steps
Setting up a new Spectrum modem and router takes about 15 to 20 minutes if you follow the steps in order. The modem connects to your wall outlet and cable line first, then the router connects to the modem by ethernet cable. Once both devices power on and the lights stop blinking, you can connect your devices to the network. Most people finish without calling support, but Spectrum's setup line is available if you get stuck.
The physical setup is straightforward because there are only three cable connections to make. The hardest part for most people is waiting for the modem to finish starting up — this can take five to ten minutes the first time. Knowing what the lights mean helps you know whether to wait or troubleshoot.
Key Takeaways
- Connect the coaxial cable from your wall outlet to the modem's cable port, then plug the modem into power and wait five to ten minutes for it to fully start.
- Run an ethernet cable from the modem's ethernet port to the router's WAN or internet port, then plug in the router and wait another two to three minutes.
- Look for a solid light on the modem and router — blinking lights mean they are still starting up or searching for signal.
- Find the default network name and password on the router's label or in the manual, then connect your phone or computer to that network.
- Change the default password through the router's settings page before you let other people use the network.
What You Need Before You Start
Gather these items before you unpack the modem and router. You need the coaxial cable that came with your modem — this is the thick cable with the twist-on connector. You also need an ethernet cable to connect the modem to the router; most routers come with one in the box, but if yours did not, a standard ethernet cable from any electronics store works.
Find a location near your cable outlet and within sight of where you want to use the internet. The modem needs to stay plugged in at all times, so pick a spot with a power outlet nearby. The router can sit on a shelf or table, but it works better if it is not inside a cabinet or closet — radio signals travel better through open air.
Have your Spectrum account number handy. You can find it on your bill or in the Spectrum app. You may not need it, but if the modem does not connect to the network, Spectrum support will ask for it.
Connect the Modem to Power and Cable
Unpack the modem and place it near your cable wall outlet. Take the coaxial cable — the one with the threaded connector — and screw it into the port on the back of the modem labeled "Cable In" or "Cable." Tighten it by hand until it is snug; do not use a wrench. Plug the modem's power cord into a wall outlet.
The modem will light up and start its startup sequence. You will see lights blinking on the front. This is normal. The modem is talking to Spectrum's network and downloading its settings. This takes five to ten minutes the first time. Do not unplug it or move it during this time.
While you wait, look at the lights on the front of the modem. Most Spectrum modems have lights labeled Power, Online, and read (or similar names). The Power light should be solid. The Online and read lights will blink while the modem is starting. When the Online light turns solid, the modem is ready for the next step.
Connect the Router to the Modem
Once the modem's Online light is solid, take an ethernet cable and plug one end into the modem's ethernet port — this is the port labeled "Ethernet" or "LAN" on the back. Plug the other end into the router's WAN port, Internet port, or the port labeled with an arrow pointing inward. This port is usually a different color from the other ethernet ports on the router.
Plug the router into a power outlet. The router will light up and begin its startup sequence. You will see lights blinking on the front. Wait two to three minutes for the router to fully start. When the lights stop blinking rapidly and settle into a steady pattern, the router is ready.
Do not connect any devices to the network yet. Let both the modem and router sit for a full minute after the lights stabilize. This gives them time to finish talking to each other.
Find Your Network Name and Password
Look at the label on the bottom or back of your router. You will see a network name (also called SSID) and a password printed there. The network name is usually something like "Spectrum-1234" or the router brand name followed by numbers. The password is a string of letters and numbers.
If you cannot find the label, check the router's manual or the box it came in. Some routers also print this information on a card inside the box. Write down both the network name and password before you move forward.
If your router did not come with a default password, or if you lost the label, you can reset the router to its factory settings. Press and hold the reset button on the back of the router for ten seconds while it is powered on. The router will restart and return to its default settings, and the label information will explore again. This erases any changes you made, so only do this if you have not yet set up any devices.
Connect Your First Device to the Network
On your phone or computer, open the list of available networks. You should see your router's network name in the list. Tap or click on it and enter the password from the label. Your device will connect to the network.
Open a web browser and try to visit any website — for example, google.com. If the page loads, your internet is working. If you see an error or a login page, wait another minute and try again. Sometimes the router needs a few extra seconds to fully connect to the modem.
If the page still does not load, check that the ethernet cable between the modem and router is plugged in firmly on both ends. Unplug and replug it if you are not sure. Then wait another minute and try the website again.
Change Your Default Password
The default password on the router label is the same for every router of that model. Anyone who knows the model can look up that password online. Before you let other people use your network, change it to something only you know.
Open a web browser on a device connected to your network and type the router's IP address into the address bar. This is usually 192.168.1.1 or 192.168.0.1, but check your router's manual to be sure. You will see a login page. Enter the default username and password from the label.
Look for a section called "Wireless Settings," "WiFi Settings," or "Security." Find the field for the network password or passphrase. Delete the old password and type in a new one. Make it at least 12 characters long and include uppercase letters, lowercase letters, and numbers. Save the changes. The router will restart, and you will need to reconnect your devices using the new password.
Troubleshooting If Something Does Not Work
If the modem's Online light does not turn solid after 15 minutes, the modem may not be getting a signal from Spectrum. Check that the coaxial cable is screwed in tightly at both the wall outlet and the modem. If it is loose, tighten it and wait another five minutes. If the light still does not turn solid, the cable outlet itself may be the problem — try a different outlet if one is available nearby.
If the modem is online but the router does not connect, make sure the ethernet cable is plugged into the modem's ethernet port and the router's WAN or Internet port. Unplug both devices, wait 30 seconds, plug them back in, and wait for the lights to stabilize again. If the router still does not connect, try a different ethernet cable.
If your devices connect to the network but cannot reach the internet, restart both the modem and router. Unplug the modem first, wait 30 seconds, and plug it back in. Wait for the Online light to turn solid. Then unplug the router, wait 30 seconds, and plug it back in. Wait for the router lights to stabilize. Try connecting to a website again.
If you have tried these steps and nothing works, contact Spectrum support at 1-855-707-7328. Have your account number and the model numbers of your modem and router ready. Spectrum support can check whether your account is active and whether the modem is registered to your address.
Frequently Asked Questions
How long does it take for the modem to fully start up?
The first startup usually takes five to ten minutes. After that, if you restart the modem, it typically takes three to five minutes. If the Online light does not turn solid after 15 minutes, there may be a problem with the cable signal or the modem itself.
Can I use my own router instead of the one Spectrum provided?
Yes. Any router that supports ethernet connection works with a Spectrum modem. Connect the ethernet cable from the modem to your router's WAN port the same way you would with a Spectrum router. The setup steps are the same.
What do the different lights on the modem mean?
Power should be solid when the modem is on. Online or Internet should be solid when the modem is connected to Spectrum's network. read or Activity blinks when data is moving. If Online never turns solid, the modem is not getting a signal from the cable outlet.
Do I need to call Spectrum to set up the modem?
Most Spectrum modems set up automatically when they connect to the network. If your modem does not set up within 30 minutes, or if you see an error message on your devices, contact Spectrum support with your account number and the modem's serial number, which is on the label.
Can I move the router to a different room?
Yes, as long as the ethernet cable from the modem can reach it. If the cable is not long enough, you can buy a longer ethernet cable. The router does not need to be in the same room as the modem, but the signal is stronger the closer they are and the fewer walls between them.