What You Need Before You Start

Setting up a new modem takes about 15 to 30 minutes and requires only a few things: your modem, an ethernet cable (usually included), a coaxial cable connected to your wall outlet, and your internet service provider's account number or phone number. Most modems come with a quick-start guide, but the actual steps are the same across brands.

Before you unbox anything, call your internet provider or log into your account online to find out whether they will set up the modem for you remotely or whether you need to do it yourself. Some providers set up modems the moment they detect them on the network; others require you to call a support line or visit their website. Knowing this ahead of time saves a frustrating 20 minutes of waiting for a connection that never comes.

Key Takeaways

  • Turn off your old modem and router, then wait 30 seconds before plugging in the new modem so the network can reset cleanly.
  • Connect the coaxial cable from your wall outlet to the modem's port labeled "Cable In" or "Coax In", then plug in the power cable.
  • Wait three to five minutes for the modem's lights to stabilize — usually a solid power light and a blinking or solid internet light means you are connected.
  • Your internet provider may set up the modem automatically, or you may need to call them or visit their website to complete set up.
  • Connect your router to the modem using an ethernet cable, or set up a wireless connection if your modem has built-in Wi-Fi.

Power Down Your Current Equipment

Unplug your old modem and router from power. Wait at least 30 seconds — this clears the network cache and prevents conflicts when the new modem connects. If you have a battery backup unit, unplug that too.

While you wait, locate the coaxial cable that runs from your wall outlet to your old modem. You will disconnect this cable from the old modem and connect it to the new one. The coaxial cable is the thick cable with a threaded metal connector, not the ethernet cable (which is thinner and has plastic clips on the ends).

Connect the Cables to Your New Modem

Take the coaxial cable from your wall outlet and screw it firmly into the port on your new modem labeled "Cable In," "Coax In," or sometimes just "In." Tighten it by hand until it is snug — do not use a wrench or pliers, as you can damage the connector. The connection should feel firm but not forced.

Plug the power cable into the modem and into a wall outlet or power strip. Do not use a surge protector with an on/off switch, because if the switch gets turned off accidentally, your internet will drop. A standard outlet or a surge protector that stays on is fine.

Leave the ethernet port empty for now. You will use it in a moment to connect your router, but the modem needs to boot up first.

Wait for the Lights to Stabilize

The modem will take three to five minutes to fully boot and connect to your internet service provider's network. During this time, you will see the lights on the front change. Most modems show a power light (usually solid green or white), an internet or online light (which may blink while connecting, then go solid), and sometimes separate lights for upload and read activity.

A solid power light and a solid or steadily blinking internet light mean the modem has connected. If the internet light stays off or blinks red after five minutes, the coaxial cable may not be tight enough, or your provider may not have activated the modem yet. Tighten the cable and wait another minute or two. If it still does not connect, contact your internet provider — they may need to set up it on their end.

set up the Modem With Your Internet Provider

Some providers set up modems automatically the moment they detect them on the network. Others require you to take an extra step. Check your provider's website, log into your account, and look for a section called "set up Equipment," "Add Device," or "Manage Modems." If you see your new modem listed there, follow the prompts to set up it.

If you do not see an set up option online, call your provider's customer service line. Have your account number and the modem's serial number ready — you can find the serial number on a sticker on the back or bottom of the modem, or in the settings menu on your computer. The provider will set up the modem remotely, and you should see the internet light go solid within a few minutes.

Connect Your Router or Devices

Once the modem is activated and the internet light is solid, plug one end of an ethernet cable into the modem's ethernet port (labeled "Ethernet," "LAN," or "Internet Out") and the other end into your router's internet port (usually labeled "WAN" or "Internet In"). Power on your router and wait two to three minutes for it to boot.

If your modem has built-in Wi-Fi, you can skip the router and connect devices wirelessly instead. The Wi-Fi network name and password are usually printed on a sticker on the modem itself. If you want to use a separate router for better range or more features, connect it via ethernet as described above.

Test your connection by opening a web browser on a computer or phone and visiting any website. If the page loads, your modem is working. If it does not, restart your router and wait another minute, then try again.

Troubleshooting Common Setup Problems

If the internet light stays off or red after 10 minutes, first check that the coaxial cable is hand-tight at both the wall and the modem. A loose connection is the most common reason for no signal. If the cable is tight and the light is still off, the coaxial port on the wall may be damaged or disconnected. Try a different outlet if one is available, or contact your provider to check the line from the street.

If the modem connects but your devices cannot see the Wi-Fi network, make sure your router is powered on and connected to the modem via ethernet. If you are using the modem's built-in Wi-Fi, check that Wi-Fi is enabled — some modems have a physical button or a settings menu option to turn it on. If the network appears but devices cannot connect, restart the modem and router, then try again.

If your internet is very slow, restart the modem and router. If speed does not improve, run a speed test on your computer using a free tool like Speedtest.net. Compare the result to the speed your provider promises in your service plan. If you are getting much less than promised, contact your provider — the issue may be on their network, not your modem.

Frequently Asked Questions

Do I need to call my internet provider before I plug in the new modem?

No, but it helps to know whether they set up modems automatically or require you to call. If you are unsure, you can plug it in and wait five minutes. If the internet light does not go solid, then call. Most providers set up within minutes of detecting the modem, so you may not need to do anything.

Can I keep my old modem plugged in while I set up the new one?

No. Unplug the old modem completely before you connect the new one. Two modems on the same line can interfere with each other and prevent either one from connecting properly. Once the new modem is working, you can unplug the old one for good or return it to your provider if it is a rental.

What if the modem came with a battery backup unit?

Connect the modem to the battery backup unit the same way you would to a wall outlet. The battery backup keeps your modem running during a power outage so you can still use the internet. Make sure the battery unit itself is plugged into a wall outlet so it can charge. You do not need to do anything else — it works automatically.

How do I know if my modem is compatible with my internet provider?

Your provider has a list of approved modems on their website. Search for your modem's model number on that list before you buy. If you already bought it, contact your provider with the model number and they will tell you whether it works with your service. Some providers rent modems instead of letting you use your own, so check your service agreement.

Can I move my modem to a different room?

Yes, as long as there is a coaxial outlet in that room. Unplug the modem, disconnect the coaxial cable, move it to the new location, and reconnect everything. The modem will reconnect to the network within a few minutes. If the new room does not have a coaxial outlet, you will need to hire a technician to install one, or use a different room.