Connect the cables and power on your modem
Your Xfinity modem has three cable connections on the back. The coaxial cable (thick, with a threaded connector) plugs into the port labeled "Cable In" — this is the line from your wall. The Ethernet cable (thin, rectangular) goes into any port labeled "Ethernet" if you want a wired connection to your computer or router. The power cable plugs into the power port on the bottom or side of the modem.
Once all three cables are seated firmly, plug the power cable into a wall outlet. The modem will take 2 to 3 minutes to boot. You will see lights on the front: the power light should be solid, and within a minute or two you should see the "Online" or "Internet" light turn solid green or white. If the online light stays red or orange, the modem is not connecting to Xfinity's network yet — wait another minute and check again.
Do not unplug or restart the modem during this startup period. Let it finish booting completely before moving to the next step.
Key Takeaways
- Connect the coaxial cable from your wall to the "Cable In" port, then plug in power and wait 2 to 3 minutes for the modem to boot fully.
- The online light should turn solid green or white within a few minutes; if it stays red or orange after five minutes, restart the modem by unplugging it for 30 seconds.
- You can set up your Wi-Fi network name and password through the modem's web interface at 10.0.0.1 or through the Xfinity app on your phone.
- Write down your Wi-Fi network name and password somewhere safe so you can share them with devices and guests later.
- If the online light does not turn green after a restart, contact Xfinity support — the issue is likely with the line from your wall, not the modem itself.
Access the modem's settings through your web browser
Once the online light is solid green, open a web browser on any device connected to the modem (either by Ethernet cable or Wi-Fi). Type 10.0.0.1 into the address bar and press Enter. This takes you to the modem's settings page.
You will be asked to log in. The default username is admin and the default password is motorola (or sometimes admin — try both if one does not work). After you log in, you will see a dashboard showing your modem's status, signal strength, and connected devices.
If you cannot reach 10.0.0.1, make sure your device is actually connected to the modem. If you are using Wi-Fi, check that you are connected to the network name (SSID) that matches your modem's model number — this is the default network name until you change it.
Create your Wi-Fi network name and password
In the modem's settings page, look for a section labeled "Wi-Fi" or "Wireless" — the exact name depends on your modem model, but it is usually in the main menu on the left side. Click on it to open the wireless settings.
You will see two fields: one for the network name (SSID) and one for the password. The network name is what appears in the list of available Wi-Fi networks on your phone or computer. Choose something you will recognize — your last name, your street name, or a straightforward phrase all work well. Avoid using personal information like your address or phone number.
The password must be at least 8 characters long. Use a mix of uppercase letters, lowercase letters, numbers, and symbols (like ! or @) to make it harder to guess. Write this password down and store it somewhere safe — you will need it every time you connect a new device to your Wi-Fi.
Click "Save" or "explore" at the bottom of the page. The modem will restart the Wi-Fi network, which takes about 30 seconds. Your old network name will disappear from the list of available networks, and your new one will appear.
Connect your devices to the new Wi-Fi network
On your phone, tablet, or computer, open the Wi-Fi settings and look for your new network name in the list of available networks. Click on it and enter the password you just created. The device will connect within a few seconds.
Repeat this step for every device you want to connect — laptops, phones, tablets, smart speakers, and streaming devices all use the same network name and password. Once a device has connected once, it will remember the password and reconnect automatically whenever it is in range.
If a device will not connect, double-check that you typed the password correctly. Passwords are case-sensitive, so "MyPassword" is different from "mypassword". If you are still stuck, go back to the modem settings, click on the Wi-Fi section again, and verify that the password you saved matches what you are typing.
Restart the modem if the online light does not turn green
If after 5 minutes the online light is still red or orange, the modem is not connecting to Xfinity's network. The fastest fix is a restart. Unplug the power cable from the back of the modem, wait 30 seconds, and plug it back in. The modem will boot again — this usually takes 2 to 3 minutes.
While the modem is restarting, check that the coaxial cable from your wall is screwed in tightly. A loose connection is the most common reason the online light stays red. Hand-tighten the connector at the "Cable In" port — it should be snug but not so tight that you need a wrench.
If the online light turns green after the restart, you are done with this step. If it stays red or orange after a second restart, the issue is likely with the cable line from your wall or with Xfinity's network in your area. Contact Xfinity support at the number on your bill or through the Xfinity app — they can check the line remotely and tell you whether service is down in your neighborhood.
Use the Xfinity app as an alternative to the web browser
If you prefer not to use the web browser, you can set up your Wi-Fi network through the Xfinity app on your phone. read the app from the Apple App Store or Google Play Store, open it, and sign in with your Xfinity account username and password (the same login you use to pay your bill).
The app will show your modem in the "Devices" or "Network" section. Tap on it to open the modem settings, then look for "Wi-Fi" or "Wireless Settings". You can change your network name and password from here, just as you would in the web browser. The app also shows you which devices are connected to your network and lets you pause Wi-Fi on specific devices if needed.
The app is useful if you want to manage your network from your phone later — for example, if you need to restart the modem or change the password without sitting at a computer.
Change the default login password for security
Once your Wi-Fi is set up and working, go back to the modem settings at 10.0.0.1 and change the default admin password. Look for a section labeled "Administration", "Advanced", or "Security" in the settings menu. Find the option to change the admin password and enter a new one — use something you will remember but that is not straightforward to guess.
This step is optional but recommended. The default password is the same on all Xfinity modems, so anyone who knows this can access your modem settings if they are on your Wi-Fi network. Changing it prevents guests or visitors from accidentally (or intentionally) altering your network settings.
After you change the password, write it down and store it somewhere safe. You will need it if you ever want to access the modem settings again.
Frequently Asked Questions
How long does it take for the modem to fully boot?
Most Xfinity modems take 2 to 3 minutes to boot completely. The online light should turn solid green within this time. If it is still red or orange after 5 minutes, restart the modem by unplugging it for 30 seconds and plugging it back in.
What if I forgot my Wi-Fi password?
You can reset it by logging back into the modem settings at 10.0.0.1, going to the Wi-Fi section, and changing the password to something new. You will need to reconnect all your devices using the new password. If you forgot the admin password for the modem itself, you can factory reset the modem by holding the reset button on the back for 10 seconds — this erases all your settings and returns the modem to its default state.
Can I use my own router with the Xfinity modem?
Yes. Connect an Ethernet cable from one of the Ethernet ports on the modem to the "Internet" or "WAN" port on your router. The router will then broadcast the Wi-Fi network instead of the modem. You can turn off the modem's Wi-Fi in the settings to avoid having two networks in your home.
Why is my internet slow even though the online light is green?
A green online light means the modem is connected, but it does not measure speed. Slow internet can be caused by too many devices connected at once, interference from other Wi-Fi networks, or a problem with your service plan. Restart the modem, move closer to it, and check how many devices are actively using the network. If it is still slow, contact Xfinity support to check your signal strength and service plan.
Do I need to do anything else after setup is complete?
No. Once your Wi-Fi is working and devices are connected, the modem will run on its own. Xfinity sends updates to the modem automatically, usually at night. You do not need to restart it or check on it unless you have connection problems.