Test your DSL modem by checking the lights, running a speed test, and confirming your connection to the internet
A working DSL modem shows specific light patterns, connects your devices to the internet, and delivers the speed your provider promised. You can test all three in about ten minutes without tools or special knowledge. Start by looking at the lights on the front of the modem, then run a speed test on your computer or phone, then restart the modem if anything looks wrong. Most problems are temporary and fix themselves after a restart.
The tests below assume your modem is already plugged in and has been running for at least two minutes. If you just installed it or restarted it, wait five minutes before testing—modems take time to connect to your provider's network.
Key Takeaways
- The Power light should be solid green or white; the Internet light should be solid green or blue; the DSL light should be solid green or blue after the modem boots up.
- Run a speed test at speedtest.net or fast.com to see if your actual read and upload speeds match what your provider advertises.
- Restart the modem by unplugging it for 30 seconds, then plugging it back in, and wait five minutes for it to reconnect before testing again.
- If the DSL light stays red or off after five minutes, the modem cannot reach your provider's network and you should contact your provider.
- If the Internet light is off but the DSL light is on, the modem is connected to the network but your router or device is not connected to the modem.
Read the lights on the front of the modem
The lights tell you whether the modem is powered on, connected to your provider's network, and connected to your devices. Most DSL modems have four lights: Power, DSL, Internet, and sometimes a light for a specific device or service. The exact names and colors vary by brand, but the pattern is the same.
Power light: Should be solid green, white, or amber. If it is off, the modem is not getting power—check that the power cable is plugged into both the modem and the wall outlet, and that the outlet itself has power. If the light is blinking, the modem is starting up; wait two more minutes and check again.
DSL light: Should be solid green or blue after the modem has been on for two minutes. This light means the modem has connected to your provider's DSL line. If it is red, blinking, or off after five minutes, the modem cannot detect a signal from your provider. Check that the phone cable is plugged into the DSL port (not the phone port) on the back of the modem, and that the other end is plugged into the wall jack where your phone line comes in. If the light still does not turn green, restart the modem.
Internet light: Should be solid green or blue. This light means your modem is connected and ready to send data to your devices. If it is off, your modem is not connected to the internet even though it may be connected to the DSL line. If it is blinking, data is being sent or received right now—this is normal. If it stays off, restart the modem.
Run a speed test to measure your connection
A speed test shows you the actual read and upload speeds your modem is delivering. Compare these numbers to the speeds your provider advertises in your contract or on their website. Most home DSL plans advertise between 5 and 25 megabits per second (Mbps) for downloads, though some newer DSL can reach 100 Mbps.
Go to speedtest.net or fast.com on any device connected to your modem. Both sites are free and do not require you to sign in. Click the button to start the test and wait for it to finish—this usually takes one to three minutes. The test will show your read speed, upload speed, and ping (the time it takes for data to travel to the test server and back).
Your actual speed will usually be 10 to 20 percent lower than what your provider advertises, because of network traffic and the distance between you and the test server. If your speed is less than half of what you pay for, restart the modem and run the test again. If the speed is still low after a restart, contact your provider—the problem may be on their end or on the line coming into your house.
Run the speed test at different times of day if you can. DSL speeds often drop during evening hours when many people are using the internet at the same time. If the speed is normal in the morning and slow at night, the modem is working correctly and the slowness is due to network congestion.
Restart the modem when lights are wrong or speed is low
Restarting clears the modem's memory and forces it to reconnect to your provider's network. This fixes most temporary problems. Unplug the power cable from the back of the modem (not from the wall outlet), wait 30 seconds, then plug it back in. The Power light will turn on, and the other lights will blink as the modem boots up.
Wait five minutes for the modem to fully connect. During this time, the DSL light and Internet light will blink on and off as the modem communicates with your provider. After five minutes, both lights should be solid green or blue. If they are not, check the cables again and restart once more. If the lights still do not turn solid after a second restart, contact your provider.
Do not unplug the modem while the lights are blinking—this can interrupt the connection process and make the problem worse. If you need to restart, wait until the lights have been solid for at least 30 seconds, then unplug.
Check the cables and connections
Loose or damaged cables are the most common reason a modem stops working. Look at the back of the modem and make sure the phone cable is plugged firmly into the port labeled DSL or Line. The other end of this cable should be plugged into the wall jack where your phone line comes in. If your modem has a separate phone port, make sure nothing is plugged into it—the DSL port and the phone port look similar but do different things.
Check the power cable next. It should be plugged into the modem and into a working wall outlet. Test the outlet by plugging in a lamp or phone charger to confirm it has power. If the outlet does not work, try a different outlet in the same room.
If you have a router connected to the modem, make sure the ethernet cable is plugged into the port labeled Internet, WAN, or Modem on the router. This port is usually a different color from the other ports. If the cable is plugged into a regular LAN port instead, your devices will not connect to the internet.
Test your connection to devices
Once the modem lights are solid, test whether your devices can actually connect. On a computer or phone, look for your modem's network name in the list of available Wi-Fi networks (if your modem has Wi-Fi built in) or connect an ethernet cable from the modem to your device. Open a web browser and go to any website—google.com works well. If the page loads, your device is connected and the modem is working.
If the page does not load, restart the modem again and wait five minutes. If it still does not work, restart your device. If you are using Wi-Fi, forget the network on your device and reconnect by entering the password again. The password is usually printed on a sticker on the back of the modem.
If multiple devices cannot connect even though the modem lights are solid, the problem is likely with your router (if you have one) rather than the modem. Restart the router by unplugging it for 30 seconds, then plugging it back in. If you do not have a router and the modem has Wi-Fi, restart the modem instead.
Know when to contact your provider
Contact your provider if the DSL light stays red or off after you have restarted the modem twice and checked all the cables. This means the modem cannot detect a signal from the provider's network, and the problem is likely on their end or on the line coming into your house. Your provider can run a test on their end to see if the line is working.
Also contact your provider if your speed is consistently less than half of what you pay for, even after restarting the modem and running the speed test at different times of day. Write down the speeds you measured and the times you tested so you can tell the provider exactly what you are seeing.
Have the modem's model number and serial number ready when you call. Both are printed on a sticker on the back or bottom of the modem. Your provider may ask you to restart the modem while you are on the phone with them, or they may send a technician to test the line.
Frequently Asked Questions
What do the lights mean if they are blinking instead of solid?
Blinking lights mean data is being sent or received right now. The Internet and DSL lights will blink when you are using the internet, downloading files, or running a speed test. This is normal. If a light blinks constantly even when you are not using the internet, restart the modem. If it still blinks after a restart, contact your provider.
Can I test the modem without a router?
Yes. Plug an ethernet cable directly from the modem into your computer, then open a web browser and go to a website. If the page loads, the modem is working. You can also run a speed test this way. Testing without a router tells you whether the problem is with the modem or with the router.
How often should I restart my modem?
You do not need to restart it on a schedule. Restart only when the lights are wrong, your speed is low, or your devices cannot connect. Most modems can run for months without a restart. If you find yourself restarting more than once a week, contact your provider—the line may be unstable.
What if the modem is very hot to the touch?
Modems do get warm during normal use, but they should not be too hot to hold your hand on for a few seconds. If it is very hot, unplug it and let it cool for 15 minutes. Make sure the modem has space around it for air to flow—do not put it in a closed cabinet or cover it with papers. If it overheats again after cooling, the modem may be failing and you should contact your provider about a replacement.
Do I need to restart the modem if I restart my router?
No. Restarting the router does not affect the modem. If you restart the router, wait two minutes for it to boot up, then test your connection. If restarting the router does not fix the problem, then restart the modem as well.