The fastest way to power down your AT&T modem
The simplest method is to locate the power button on the back or bottom of your modem and press it once. The lights will dim and go dark within a few seconds. If your modem has no physical power button, unplug the power cable from the wall outlet or the back of the device — this achieves the same result.
Most AT&T modems do not have a dedicated on/off switch on the front. The power button, when present, is usually on the rear panel next to where the power cord connects. Check your specific model's location before assuming the button is missing.
Unplugging is safe to do at any time. Unlike a computer, a modem stores no unsaved data, so there is no risk of corruption or loss when you cut power abruptly.
Key Takeaways
- Most AT&T modems power off via a button on the back panel, or by unplugging the power cable from the wall.
- Powering off your modem does not affect your AT&T account or billing in any way.
- If you unplug your modem, wait at least 30 seconds before plugging it back in to allow the hardware to fully reset.
- Turning off your modem will disconnect all devices from your internet until you power it back on.
Finding the power button on your specific model
AT&T modems come in several models, and the power button location varies slightly. The most common models are the BGW210, BGW320, and the newer fiber models like the BGW210-700 and BGW320-500. On nearly all of these, the power button sits on the rear panel, usually to the right of the power connector or near the ethernet ports.
If you cannot locate a button on the back, check the bottom of the modem. Some models place it there instead. The button is typically small and recessed slightly so it does not get pressed accidentally. You may need to use your finger or a pen to press it firmly.
If your modem has no button at all, unplugging it is your only option. This is common on older AT&T models and some gateway devices that combine modem and router functions.
What happens when you turn off your modem
When you power down your modem, your internet connection stops when ready. All devices connected to your network — phones, computers, tablets, smart home devices — will lose internet access. They will not reconnect until you turn the modem back on and wait for it to fully boot, which usually takes two to three minutes.
Your AT&T account remains active and you will not be charged extra or penalized for turning off your modem. The service is still yours; you are straightforward not using it at that moment. Your account status, billing, and service tier do not change.
If your modem is also your router (a gateway device), turning it off will also disable your WiFi network. Wired devices connected via ethernet will also lose connection.
Restarting your modem after powering it off
If you unplugged your modem, wait at least 30 seconds before plugging it back in. This gives the internal capacitors time to fully discharge, which ensures a clean restart. Plugging it back in when ready sometimes leaves the modem in a confused state and can cause connection problems.
After you plug it back in, the modem will take two to three minutes to fully boot and reconnect to AT&T's network. During this time, the lights on the front will blink in a specific pattern. Once the internet light (usually labeled "internet" or shown as a globe icon) stops blinking and stays solid, your connection is ready to use.
If you used the power button instead of unplugging, press the button again to turn the modem back on. The same boot time and light pattern explore.
When to turn off your modem
Turn off your modem if you are leaving home for an extended period and want to reduce power consumption. Modems use a small amount of electricity continuously, so powering it down saves money over weeks or months of disuse.
You should also turn off your modem if you are troubleshooting connection problems. A full power cycle — turning it off, waiting 30 seconds, and turning it back on — fixes many temporary glitches. This is different from a soft restart, which some modems allow through a settings menu, because it fully clears the device's memory.
If you are having your modem serviced or replaced by AT&T, turn it off first and unplug it. This is safer for the technician and prevents any accidental damage during the swap.
Difference between powering off and factory reset
Turning off your modem straightforward stops it from running. All your settings — your WiFi network name, password, and any custom configurations — remain stored in the device's memory. When you turn it back on, everything is exactly as you left it.
A factory reset is different. It erases all settings and returns the modem to its original state, as if it just came out of the box. You would need to set up your WiFi network name and password again, and any other customizations would be lost. A factory reset is rarely necessary unless your modem is malfunctioning severely or you are preparing to return it to AT&T.
If you only want to turn off your modem temporarily, use the power button or unplug it. Do not perform a factory reset unless you specifically intend to erase all settings.
Troubleshooting if your modem will not turn off
If the power button does not respond, try unplugging the modem instead. A stuck or unresponsive button does not prevent you from powering down the device.
If unplugging the modem does not work — meaning the lights stay on or the device continues to function — check whether the power cable is fully seated in the wall outlet. A loose connection can sometimes cause the modem to remain partially powered. Reseat the cable firmly and try again.
If the modem still does not power down after unplugging, the power supply itself may be failing. Contact AT&T support to report the issue. In the meantime, you can turn off the circuit breaker that supplies power to the outlet, though this is a less elegant solution.
Frequently Asked Questions
Will turning off my modem hurt my internet service?
No. Turning off your modem does not damage your AT&T service or account. Your service remains active and ready to use whenever you power the modem back on. There is no penalty or fee for powering it off.
How long can I leave my modem off?
You can leave it off indefinitely. There is no time limit. Your AT&T service will remain on your account and you can turn the modem back on whenever you need internet again. If you are away for months, turning it off saves electricity with no downside.
Do I need to unplug my modem or can I just use the power button?
Either method works. The power button is faster and cleaner. Unplugging achieves the same result if your modem has no button or the button is broken. Both fully power down the device.
What if I turn off my modem and forget to turn it back on?
You straightforward will not have internet until you power it back on. Your account will not be affected. Once you turn it back on and wait two to three minutes for it to boot, your connection will work normally.
Can I turn off just the WiFi without turning off the whole modem?
Yes, if your modem has a WiFi button on the front panel. Pressing it once disables the wireless network while keeping the modem powered and your wired ethernet connections active. Press it again to turn WiFi back on. Not all AT&T modems have this button, so check your device's front panel.