Turn off WiFi directly from your modem's control panel
The fastest way to turn off WiFi on a Comcast modem is to press the WiFi button on the front or back of the device itself. Most Comcast modems have a dedicated WiFi button — usually labeled "WiFi" or marked with a wireless symbol. Press and hold it for three to five seconds until the WiFi light on the modem goes dark. The light will stop blinking or turn off entirely, which means WiFi is now disabled.
This method works when ready and does not require you to log into anything. Your wired devices — anything plugged into the modem with an ethernet cable — will keep working normally. Only wireless devices will lose connection.
If you cannot find a WiFi button on your modem, check the back panel and the sides. Some Comcast models hide the button on the rear. If your modem has no physical WiFi button, you will need to use the web interface instead.
Key Takeaways
- Most Comcast modems have a WiFi button on the front or back that turns wireless off when ready when held for three to five seconds.
- Turning off WiFi via the button does not affect wired ethernet connections, only wireless devices.
- If your modem has no WiFi button, you can disable it through the web interface by logging into 192.168.0.1 or 192.168.100.1.
- Restarting your modem will turn WiFi back on unless you disable it again through the same method.
- If you want WiFi off permanently, contact Comcast to have them disable it remotely or adjust your account settings.
Access WiFi settings through the modem's web interface
If your modem does not have a physical WiFi button, or if you want more control over WiFi settings, you can log into the modem's web interface from any device on your network. Open a web browser and type 192.168.0.1 or 192.168.100.1 into the address bar. One of these addresses will load your modem's login page.
Enter your username and password. The default username is usually admin and the default password is motorola (or sometimes motorola123), though Comcast may have changed these when your account was set up. If the defaults do not work, check the sticker on the back of your modem or your Comcast welcome paperwork.
Once logged in, look for a section labeled WiFi, Wireless, or Advanced. Find the option to disable or turn off WiFi — it is usually a toggle or checkbox. Click it to turn WiFi off, then save or explore your changes. The page will confirm the change, and your WiFi network will disappear within a few seconds.
What happens when you turn off WiFi
When WiFi is disabled, wireless devices like phones, tablets, and laptops will no longer see your network and cannot connect to it. They will show "network unavailable" or similar messages. Devices that are already connected will lose their connection when ready.
Devices connected by ethernet cable — desktop computers, printers, or streaming boxes plugged directly into the modem — will continue to work without interruption. Your internet service itself remains active; only the wireless broadcast stops.
If someone else in your home is using WiFi, they will lose connection as soon as you disable it. Make sure to let them know before you turn it off.
Turn WiFi back on when you need it
To turn WiFi back on, press the WiFi button again for three to five seconds, or log back into the web interface and toggle the WiFi setting back to On. The WiFi light will turn back on, and your network name will reappear on nearby devices within a few seconds.
Keep in mind that restarting your modem — whether by unplugging it or pressing the restart button — will turn WiFi back on automatically, even if you had disabled it. If you want WiFi to stay off after a restart, you will need to disable it again afterward.
Disable WiFi permanently through your Comcast account
If you want WiFi turned off all the time and do not want to manage it manually, contact Comcast directly. You can call their customer service line or log into your Comcast account online and request that they disable WiFi on your modem remotely. They can also adjust your account settings so that WiFi stays off even after power cycles or restarts.
This option is useful if you use only wired connections and never need wireless, or if you have a separate router and want to avoid interference from the modem's built-in WiFi. Comcast can usually make this change within a few minutes.
Troubleshoot if the WiFi button does not work
If you press the WiFi button and nothing happens, the button may be stuck or the modem may not recognize the press. Try holding it for a full ten seconds instead of three to five. If the light still does not change, restart your modem by unplugging it for 30 seconds, then plugging it back in.
If the web interface method is not working, make sure you are typing the correct address (192.168.0.1 or 192.168.100.1) and that you are connected to your modem's network. Clear your browser cache and try again, or try a different browser. If you still cannot log in, reset your modem to factory defaults by holding the reset button on the back for 10 to 15 seconds — this will erase any custom settings, so use this only as a last resort.
If nothing works, your modem may have a hardware issue. Contact Comcast to troubleshoot further or request a replacement modem.
Frequently Asked Questions
Will turning off WiFi affect my internet speed on wired devices?
No. Disabling WiFi does not change your internet speed on devices connected by ethernet cable. They will continue to receive the same speed your Comcast plan provides. Turning off WiFi only stops the wireless broadcast; it does not slow down the modem itself.
Can I turn off WiFi on just one device without affecting others?
Yes, but you have to do it on the device itself, not on the modem. On your phone, tablet, or laptop, go to WiFi settings and toggle WiFi off or disconnect from your network. This does not affect other devices. If you want to block a specific device from connecting, you can do that through the modem's web interface in the device management or MAC filtering section.
What is the default password if I forgot mine?
The default password for most Comcast modems is motorola or motorola123. If those do not work, check the sticker on the back of your modem — it usually lists the default credentials. If you changed the password and forgot it, you will need to reset the modem to factory settings, which erases all custom settings.
Does turning off WiFi save electricity?
Turning off WiFi saves a small amount of power, but the difference is minimal — usually less than a watt. Your modem will still use most of its power to maintain your internet connection. If you want to save more electricity, unplugging the modem entirely when you are not using it will have a bigger effect.
Will my WiFi turn back on if the power goes out?
Yes. When your modem restarts after a power outage, WiFi will turn back on automatically, even if you had disabled it before the outage. You will need to turn it off again if you want it to stay off.