You can use two routers on one modem, but the second one must work in access point mode, not router mode
When you connect a second router to your modem, it cannot run as a router — it has to run as an access point. A router manages your network and assigns addresses to devices. An access point just extends the signal and lets devices connect. If you plug a second router into your modem while it is still in router mode, you create a conflict: two devices trying to manage the same network, which causes dropped connections and devices that cannot find each other.
The modem connects to the internet. The first router connects to the modem and creates your network. The second router connects to the first router (by ethernet cable or wirelessly) and repeats the signal without trying to manage it. This setup works reliably and costs less than buying a mesh system.
Key Takeaways
- The second router must be switched to access point mode before you connect it, or it will conflict with the first router and cause network problems.
- You can connect the second router to the first one using an ethernet cable (most stable) or by joining it wirelessly to your existing network.
- The second router's wireless name and password can match the first router's, so devices switch between them automatically as you move around.
- You do not need to change your modem settings — all the configuration happens on the routers themselves.
How to set the second router to access point mode
Before you plug the second router in anywhere, log into its admin panel and change its mode. Open a web browser on a computer or phone that is connected to that router (or use the router's app if it has one). Type the router's IP address into the address bar — this is usually printed on a sticker on the router itself, often something like 192.168.1.1 or 192.168.0.1. Log in with the username and password, which are also on the sticker or in the manual.
Look for a setting called "Operating Mode," "Router Mode," "Access Point Mode," or sometimes "Wireless Mode." The exact name and location depend on your router brand. TP-Link routers often have this under System Tools. Netgear routers usually have it under Advanced settings. Asus routers may call it Operation Mode and place it under Administration. Change it from Router to Access Point, then save and reboot the router. The router will restart with the new setting.
Connecting the second router by ethernet cable
Ethernet is the most reliable way to connect two routers. Run an ethernet cable from one of the LAN ports (not the WAN or internet port) on your first router to one of the LAN ports on the second router. The second router will now get its internet connection through the first one and will extend your network.
Once the cable is connected and the second router has restarted in access point mode, it should appear in your list of available networks. You can give it the same wireless name and password as the first router, so your devices automatically switch between them as you move around your home. Or you can give it a different name if you want to control which devices use which router.
Connecting the second router wirelessly
If running an ethernet cable is not practical, you can connect the second router wirelessly to the first one. After you have switched the second router to access point mode, place it within range of your first router's signal. Log back into the second router's admin panel and look for a setting called "Wireless Bridge," "Repeater Mode," or "Wireless Client Mode" — this tells the second router to join your existing network instead of creating a new one.
Select your first router's network name from the list and enter its password. The second router will connect wirelessly and relay the signal. This method is slower than ethernet because the second router has to receive and transmit on the same frequency, which cuts its speed roughly in half. It works well for filling dead zones in a large home, but if you need full speed in the second location, ethernet is better.
Naming your networks and managing devices
Once both routers are connected and in access point mode, you have two choices for how to name them. You can give both routers the same wireless network name (SSID) and password. Your devices will see one network and will automatically switch to whichever router has the stronger signal as you move around. This is seamless but means you cannot control which router a device uses.
Alternatively, you can give each router a different name — for example, "Home-Main" and "Home-Extended." This lets you manually choose which network to join on each device. Some devices (like smart home gadgets) may work better on one router or the other, so separate names give you that control. You can change the network name and password in each router's wireless settings.
Troubleshooting common problems
If the second router is not showing up as a network, check that it is actually in access point mode. Log back into its admin panel and confirm the setting was saved. If it is still in router mode, devices will see two separate networks and may not connect to the second one at all.
If devices connect but the internet is very slow on the second router, the wireless connection between the two routers may be weak. Move the second router closer to the first one, or switch to an ethernet cable. If you are using the same network name on both routers and devices are not switching between them smoothly, try giving each router a different name so you can see which one they are actually connected to.
If one router works but the other does not, restart both routers by unplugging them for 30 seconds. Then plug in the modem first, wait for it to fully boot, then plug in the first router, wait for it to fully boot, then plug in the second router. This order matters because each device needs to establish its connection before the next one starts.
When to use two routers instead of a mesh system
Two routers on one modem cost less than a mesh system and work with whatever router you already own. If you have a good router and just need to cover a dead zone in one part of your home, adding a second router in access point mode is practical and straightforward.
A mesh system is better if you want seamless roaming across a large area, if you want a single control app for everything, or if you are setting up a new network from scratch. Mesh systems are designed to work together and handle the handoff between nodes more smoothly. But if you already have a working router and just need to extend it, two routers do the job without extra cost.
Frequently Asked Questions
Do I need to change anything on my modem?
No. Your modem does not care how many routers are connected to it. The modem only talks to the first router. All the configuration happens on the routers themselves, not on the modem.
Can I use two routers in router mode if I give them different network names?
No. Two routers in router mode will conflict even if they have different names. Both will try to assign addresses to your devices and manage the network, which causes dropped connections and devices that cannot communicate. The second one must be in access point mode.
Will using two routers slow down my internet?
If you connect them by ethernet cable, there is no speed loss. If you connect them wirelessly, the second router will be roughly half as fast because it has to receive and transmit on the same frequency. The first router is not affected.
Can I use two routers from different brands?
Yes. As long as the second router can be switched to access point mode, it will work with any first router. You do not need matching brands or models.
What if I want to use the second router's ethernet ports for wired devices?
You can. Once the second router is in access point mode and connected to the first router, its ethernet ports work normally. Plug devices into those ports and they will have a wired connection to your network, just like if they were plugged into the first router.