The normal light colors on your Xfinity modem

Your Xfinity modem should show a solid green light on the power indicator and a solid green or blue light on the internet/online indicator when everything is working. The exact color depends on your modem model — some use green for both, others use blue for the internet connection — but the key is that the lights should be solid and steady, not blinking or off.

If you see a solid green power light and a solid green or blue online light, your modem is connected to Xfinity's network and passing data to your devices. You do not need to do anything. Different modem models (like the Arris SB8200, Netgear CM1000, or Comcast XB7) may have slightly different light layouts, but they all follow the same rule: solid means working, blinking means connecting or trouble.

Key Takeaways

  • A solid green power light and solid green or blue online light means your modem is working normally and you have internet.
  • Blinking lights usually mean your modem is starting up, downloading a software update, or trying to reconnect to the network — wait five to ten minutes before taking action.
  • Red lights or an off online light mean no internet connection; restart your modem by unplugging it for 30 seconds, then plugging it back in.
  • If lights stay red or off after a restart, contact Xfinity support because the problem is likely on their network side, not your equipment.

What blinking lights mean

A blinking green or blue light on the online indicator means your modem is connecting to the Xfinity network or downloading a firmware update. This is normal during startup or after a power outage. Leave the modem alone and wait five to ten minutes — the light should become solid once the connection is complete.

A blinking power light is less common but usually means the modem is booting up or experiencing a minor issue. Again, wait a few minutes. If the light stays blinking after ten minutes, unplug the modem for 30 seconds, plug it back in, and wait another five minutes for it to fully restart.

Red lights and what they signal

A red light on the online indicator means your modem has lost connection to Xfinity's network or cannot establish one. This is the most common sign of an internet outage on your street, a problem with your account, or an issue with the modem itself. A red power light is rare but suggests a hardware failure.

Start by restarting your modem: unplug it from power, wait 30 seconds, and plug it back in. Watch the lights as it boots — you should see the power light turn solid green within 10 to 15 seconds, followed by the online light turning solid green or blue within another minute or two. If the online light turns red again or stays off, the problem is likely on Xfinity's end.

When to restart your modem

Restart your modem if you see red lights, an off online light, or if your internet is slow or dropping out even though the lights look normal. Unplug the modem from the power outlet, wait a full 30 seconds (this clears the modem's memory), then plug it back in. Do not use the reset button on the back unless Xfinity support tells you to — that erases your settings and requires reconfiguration.

After you plug it back in, the modem takes about two to three minutes to fully boot and reconnect. During this time, the lights will blink. Once they go solid, test your internet by opening a web browser or running a speed test. If the lights are solid but you still have no internet, the problem may be with your router or a device, not the modem.

Lights that stay off or are always red

If the online light stays off or red after a restart, and you have waited at least five minutes, the issue is almost certainly on Xfinity's network. Check Xfinity's outage map on their website or app to see if there is a reported outage in your area. You can also call Xfinity support at 1-800-934-6489 to confirm whether the problem is on their side.

If there is no outage and the light stays red, the modem itself may be faulty. Xfinity can send you a replacement modem at no cost if yours is defective. Have your account number and service address ready when you call.

Lights that blink continuously

If the online light blinks continuously for more than ten minutes, your modem may be stuck downloading a firmware update or trying to reconnect. Restart the modem as described above. If the blinking continues after the restart, unplug it and wait two minutes before plugging it back in — sometimes a longer wait helps the update process complete.

Continuous blinking that does not stop after two restarts usually means the modem needs a factory reset or replacement. Contact Xfinity support to walk through the next steps. Do not unplug and replug repeatedly, as this can interrupt the update and damage the modem.

Frequently Asked Questions

What if my power light is green but my online light is off?

Your modem has power but is not connecting to the network. Check that the coaxial cable (the thick cable from the wall) is firmly screwed into the back of the modem. If it is loose, tighten it by hand. If it is already tight, restart the modem. If the light stays off after a restart, contact Xfinity to check for an outage or account issue.

Can I ignore blinking lights?

Yes, if the lights are blinking during startup or after a power outage. Wait five to ten minutes. If they become solid, everything is fine. If they stay blinking or turn red, restart the modem. Blinking that lasts longer than ten minutes after a restart usually means you need to contact Xfinity.

Does the color of the online light matter — green versus blue?

No. Different Xfinity modem models use different colors. Some show green for online, others show blue. What matters is whether the light is solid (working) or blinking (connecting or trouble). Check your modem's manual or the Xfinity website to confirm which color yours should display.

Should I press the reset button on the back of my modem?

Only if Xfinity support tells you to. The reset button erases all your modem settings and returns it to factory defaults, which means you will have to reconfigure it. A straightforward restart (unplug and replug) solves most problems without erasing anything.

What if the lights look normal but I have no internet?

The problem may be with your router, not your modem. Restart your router by unplugging it for 30 seconds. If you still have no internet, restart your computer or phone. If one device works but others do not, the issue is likely your Wi-Fi router, not the modem. If no devices work, restart the modem and contact Xfinity.