AT&T modems come in a few recognizable shapes, but the most common one is a white or black box about the size of a paperback book
If you have AT&T internet at home, your modem is most likely either a BGW210 or a BGW320 — these are the two models AT&T has shipped to most residential customers in recent years. Both are rectangular boxes that sit flat on a shelf or desk. The BGW210 is slightly smaller and older; the BGW320 is newer and a bit taller. Both have a row of small lights on the front that tell you whether the modem is working, and both have ports on the back where cables plug in.
The easiest way to tell which one you have is to look at the label on the bottom or back of the modem. It will say "BGW210" or "BGW320" clearly. You can also check your AT&T account online or call AT&T customer service and give them your account number — they can tell you the exact model in seconds.
Key Takeaways
- AT&T's most common modems are the BGW210 and BGW320, both white or black rectangular boxes about the size of a paperback book.
- The BGW320 is newer and slightly taller than the BGW210, but both have the same basic layout with lights on the front and ports on the back.
- You can find your exact modem model by checking the label on the bottom or back, or by logging into your AT&T account online.
- The lights on the front of your modem show you at a glance whether it is powered on, connected to the internet, and working normally.
The BGW210: AT&T's older standard modem
The BGW210 is a compact white or black box with a flat top and a footprint roughly 8 inches wide by 6 inches deep. It is not very tall — about 2 inches high — so it fits easily on a shelf, under a TV stand, or in a cabinet. On the front, you will see four or five small LED lights in a row. These lights are labeled (from left to right, usually) as Power, Internet, WiFi, and Phone, though the exact labels vary slightly depending on your setup.
On the back of the BGW210, you will find several ports. There is a power cord inlet, an ethernet port (for plugging in a wired computer or another device), a phone port (if you have AT&T phone service), and a coaxial cable port where the cable from the wall plugs in. The BGW210 also has a reset button, usually recessed so you cannot press it by accident.
The BGW320: AT&T's newer modem with WiFi 6
The BGW320 looks similar to the BGW210 but is slightly taller and has a more modern design. It is still a rectangular box, but the proportions are a bit different — it stands about 3 inches tall and has a slightly smaller footprint. Like the BGW210, it comes in white or black. The front panel has the same row of LED lights, and the back has the same basic ports: power, ethernet, phone, and coaxial cable.
The main difference between the BGW320 and the BGW210 is not what it looks like but what is inside. The BGW320 supports WiFi 6 (also called 802.11ax), which is faster than the WiFi 5 standard in the BGW210. If you have a newer phone, laptop, or tablet that supports WiFi 6, the BGW320 will give you faster wireless speeds. But from across the room, the two modems look very similar.
What the lights on the front mean
The LED lights on the front of your modem are your first clue to whether everything is working. The Power light should be solid green or white when the modem is plugged in and turned on. If it is off or red, the modem is not getting power or has a problem.
The Internet light should be solid green or white when you are connected to AT&T's network. If it is blinking, the modem is trying to connect. If it is red or off, there is no internet connection — this usually means the cable from the wall is loose, or AT&T's network is down in your area.
The WiFi light shows whether wireless is on. It should be solid green or white if WiFi is active. If it is off, WiFi is disabled (you can turn it back on using the modem's app or web interface).
The Phone light (if you have AT&T phone service) should be solid green or white when the phone service is active. If it is red or blinking, there may be an issue with your phone line.
Where to find the model number and other information
The label with your modem's model number is usually on the bottom of the unit or on the back panel. Look for a white or silver sticker that lists "Model:" followed by "BGW210" or "BGW320". The same label will also show the serial number, the MAC address, and other technical information you may need if you ever call AT&T support.
You can also find your modem model by logging into your AT&T account at att.com. Go to your account settings, find the section for internet or devices, and it should list your modem model there. This is useful if you cannot easily access the physical label on your modem.
Other AT&T modem models you might see
If you have an older AT&T account or live in a building where the modem was installed several years ago, you might have a different model. The BGW210-700 and BGW210-500 are older variants of the BGW210 with slightly different internal hardware but the same basic appearance. There is also the NVG599, which is an older model that looks similar but is a bit bulkier.
If you are not sure which model you have, the label on the bottom will tell you. If you need to replace your modem or upgrade to a newer one, AT&T can send you a replacement or a newer model — you can request this through your account online or by calling customer service.
Frequently Asked Questions
Can I use a modem that is not from AT&T?
AT&T allows you to use a third-party modem if it is compatible with their network, but most residential customers rent their modem from AT&T. If you want to buy your own, you will need to check AT&T's list of approved modems first, because not all modems work with all AT&T service types. Call AT&T or check their website to see if your modem is on the approved list.
What should I do if the lights on my modem are not what they should be?
First, check that all cables are plugged in firmly — the power cord, the coaxial cable from the wall, and any ethernet cables. Wait 30 seconds, then unplug the modem, wait 10 seconds, and plug it back in. This restart often fixes connection problems. If the lights still do not look right after a few minutes, check AT&T's website or call customer service to see if there is an outage in your area.
Where should I place my modem for the best WiFi signal?
Place your modem in a central, elevated location — on a shelf or table in the middle of your home rather than in a corner or closet. Keep it away from metal objects, microwaves, and other electronics that can interfere with the WiFi signal. Do not put it inside a cabinet or under a blanket, because that blocks the signal.
How do I know if my modem needs to be replaced?
If your modem is more than five or six years old, it may be worth upgrading to a newer model like the BGW320, which is faster. If it keeps losing connection, overheats, or the lights behave strangely even after a restart, it may be failing. Contact AT&T and describe the problem — they can tell you whether a replacement is needed.