What a Router Does and Why It Matters
A router is the device that takes the internet signal from your modem and spreads it throughout your home—both through wires and wirelessly. Your modem connects to your internet service provider; your router connects to your modem and then to your devices. Without a router, you could plug only one device directly into the modem with an ethernet cable. A router lets multiple devices use the internet at the same time, whether they are laptops, phones, tablets, or smart home devices.
The router creates a private network in your home and controls which devices can join it. It also protects your devices by acting as a barrier between them and the public internet. When you set a password on your Wi-Fi network, you are setting it on the router.
Key Takeaways
- A router broadcasts your internet signal wirelessly and lets multiple devices connect at once, while your modem is the device that connects to your internet service provider.
- The three main types are single-band (2.4 GHz only), dual-band (2.4 GHz and 5 GHz), and tri-band (2.4 GHz and two 5 GHz bands), with dual-band being the most common choice for homes.
- Router speed is measured in Mbps (megabits per second), and you should match it roughly to the internet speed your service provider gives you, not far exceed it.
- Most homes work fine with a single router, but larger homes or those with thick walls may need a mesh system or a second router placed in a central location.
- You can rent a router from your internet service provider or buy your own, and buying your own usually costs less over time.
Single-Band, Dual-Band, and Tri-Band Routers
Routers broadcast on radio frequencies called bands. The most common bands are 2.4 GHz and 5 GHz. A single-band router broadcasts only on 2.4 GHz. This band travels farther through walls and obstacles, but it is slower and more crowded because many devices use it. Single-band routers are the cheapest option but are becoming harder to find.
A dual-band router broadcasts on both 2.4 GHz and 5 GHz at the same time. The 5 GHz band is faster but does not travel as far. Most devices can connect to either band automatically, or you can choose which one to use. Dual-band routers are the standard choice for most homes and offer a good balance of speed and range.
A tri-band router has one 2.4 GHz band and two 5 GHz bands. This setup reduces congestion if you have many devices, but it costs more and is usually unnecessary for typical home use. Tri-band routers are better suited to homes with 20 or more connected devices or to people who stream video and play online games heavily.
Understanding Router Speed Ratings
Router speed is listed in Mbps (megabits per second). You will see numbers like AC1200, AX3000, or BE19000. The number refers to the total theoretical maximum speed across all bands combined. An AC1200 router can theoretically handle 1200 Mbps total; an AX3000 can handle 3000 Mbps.
The letters matter too. AC means the router uses Wi-Fi 5 (the older standard). AX means Wi-Fi 6 (newer and faster). BE means Wi-Fi 7 (the newest standard). Wi-Fi 6 and Wi-Fi 7 routers are faster and more efficient, but they cost more.
Do not buy a router much faster than the internet speed your service provider gives you. If your service plan is 200 Mbps, a router rated for 3000 Mbps will not make your internet faster—you are already limited by your service plan. A router rated for 600 to 1200 Mbps is usually enough for a 200 Mbps plan. Match the router speed roughly to what you are paying for, with a small buffer for overhead.
Single Router Versus Mesh Systems
A single router sits in one location and broadcasts in all directions. It works well for apartments, small houses, or homes where the router can be placed in a central spot. The farther you are from the router, the weaker the signal, especially through walls and floors.
A mesh system uses two or more devices (called nodes) that work together to cover a larger area. One node connects to your modem; the others spread throughout your home. Mesh systems are more expensive but provide stronger, more consistent coverage in large homes, homes with many walls, or homes where the modem is in a corner. They also make it easier to move between rooms without losing connection.
Most homes under 2,000 square feet work fine with a single router placed in a central location, away from walls and metal objects. Larger homes, homes with basements, or homes with thick concrete or brick walls may benefit from a mesh system. Before buying a mesh system, try placing a single router in the best possible location first.
Renting Versus Buying Your Own Router
Your internet service provider usually offers to rent you a router for a monthly fee, often between $10 and $15 per month. Over two years, that adds up to $240 to $360. You can also buy your own router outright, which typically costs $50 to $200 depending on the type and speed.
If you buy your own router, it must be compatible with your internet service provider. Most modern routers work with most providers, but you should check your provider's list of compatible models before buying. Your provider will tell you which routers work with their network.
Buying your own router usually saves money in the long run, especially if you keep it for three or more years. You also own the device and can replace it on your own schedule. Renting is simpler if you move frequently or prefer not to manage equipment yourself, but it costs more over time.
Where to Place Your Router
Router placement has a big effect on signal strength. Place your router in a central, elevated location—on a shelf or wall mount rather than on the floor or in a corner. Keep it away from metal objects, microwaves, and cordless phones, which can interfere with the signal. Avoid placing it inside a closet, cabinet, or behind a TV.
If your modem is in a basement or corner, consider running an ethernet cable to a more central location and placing the router there. The cable can run along baseboards or through walls. A 50-foot ethernet cable costs $10 to $20 and can make a big difference in coverage.
If you have a large home or thick walls and a single router does not reach everywhere, try moving it first before buying a mesh system. Sometimes a better location solves the problem without extra cost.
Basic Setup and Security
When you first plug in a new router, it will broadcast a default Wi-Fi network name (called an SSID) and password. You should change both of these when ready. Log into the router using the instructions that came with it—usually by typing an address like 192.168.1.1 into a web browser or using the router's app.
Change the Wi-Fi password to something strong: at least 12 characters, mixing uppercase and lowercase letters, numbers, and symbols. Change the default admin password (the one you use to log into the router itself) as well. These steps prevent neighbors or visitors from accessing your network or changing your router settings.
Most routers update their firmware (the software that runs them) automatically, but you can check manually in the settings. Keeping firmware updated closes security holes and improves performance. You do not need to do anything else for basic security—the router handles the rest.
Frequently Asked Questions
Do I need Wi-Fi 6 or Wi-Fi 7, or is Wi-Fi 5 still fine?
Wi-Fi 5 (AC routers) is still fine for most homes. Wi-Fi 6 and Wi-Fi 7 are faster and more efficient, especially if you have many devices or stream 4K video, but they cost more. If your current router works, you do not need to upgrade. If you are buying new, Wi-Fi 6 offers better value than Wi-Fi 5 at similar prices.
Can I use my old router as a second router to extend coverage?
Yes, but it works better if you set it up as an access point rather than a second router. This requires logging into the old router and disabling its DHCP server, then connecting it to your main router with an ethernet cable. Many routers have an "access point mode" in the settings that does this automatically. A mesh system is easier if you need coverage in a second area.
What is the difference between 2.4 GHz and 5 GHz?
2.4 GHz travels farther and through walls better, but it is slower and more crowded. 5 GHz is faster and less crowded, but it does not travel as far and is blocked more easily by walls. Most devices automatically pick the best band, but you can manually switch if one area of your home has weak 5 GHz coverage.
How often should I restart my router?
You do not need to restart it regularly. If your internet slows down or devices stop connecting, unplugging the router for 30 seconds and plugging it back in often fixes the problem. This is called a power cycle. If you need to restart it more than once a month, the router may be overheating or failing and should be replaced.
Will a better router make my internet faster?
No. Your internet speed is limited by your service plan, not your router. A better router will not make a 100 Mbps plan faster. It will improve coverage, reduce lag, and handle more devices, but the speed cap comes from your provider. If you want faster internet, you need a faster service plan.