A router takes the internet signal from your modem and spreads it wirelessly through your home
Your modem connects to your internet service provider's network and converts that signal into data your devices can use. A router takes that data from the modem and broadcasts it as Wi-Fi, so your phone, laptop, tablet, and smart TV can all connect without running cables to each device. The modem is the gateway to the internet; the router is what lets multiple devices use it at the same time.
Most people need both pieces of hardware, though some internet providers rent a combined modem-router unit. A separate router gives you more control over your network, better range in larger homes, and the ability to replace one piece without replacing the other when it fails.
Key Takeaways
- A router broadcasts Wi-Fi from the signal your modem receives, letting multiple devices connect wirelessly at once.
- Separate routers and modems give you more flexibility than a combined unit, since you can upgrade or replace one without the other.
- Router range depends on the model and your home's layout; walls and distance weaken the signal, so placement matters.
- Most home routers cost between $50 and $200, while mesh systems that cover larger spaces run $150 to $400.
- A router needs power and an ethernet cable from your modem to work; Wi-Fi itself requires no physical connection.
How a router connects to your modem and devices
The router plugs into power and connects to your modem using an ethernet cable—usually a short one you can run along the wall. Once powered on, the router reads the internet signal from the modem and broadcasts it as Wi-Fi. Your devices detect that Wi-Fi network, you enter the password, and they connect.
The router also assigns each device a local address on your home network, so data meant for your phone doesn't go to your laptop. It manages traffic between devices and the modem, making sure one person streaming video doesn't completely block someone else from browsing. This is why a router is necessary even if you only have one device—the modem alone cannot broadcast Wi-Fi.
Standard routers versus mesh systems
A standard router is a single box that sits in one spot and broadcasts Wi-Fi in all directions. It works well for apartments and smaller homes where one device can reach every room. In larger homes, upstairs bedrooms or the back patio may have weak signal or dead zones where Wi-Fi drops out entirely.
A mesh system uses two or more smaller units placed around your home. They talk to each other wirelessly and create one seamless network, so your phone stays connected at the same speed whether you are near the main unit or the one upstairs. Mesh systems cost more—typically $150 to $400 for a two-unit set—but they eliminate dead zones and are easier to set up than running ethernet cables to a second router.
If your home is under 2,000 square feet and mostly open, a standard router usually works. If you have multiple floors, thick walls, or a home office far from where your modem sits, a mesh system is worth the extra cost.
Router placement and Wi-Fi range
Where you place your router matters more than most people realize. A router in a closet or cabinet will have much weaker range than one in an open, central location. Walls, especially those with metal studs or plumbing, block Wi-Fi signals. Microwaves and cordless phones can also interfere with the 2.4 GHz band that many routers use.
Most standard routers reach 100 to 150 feet in open space, but real homes have walls. A router in your living room may only reach 50 feet reliably through two or three walls. Placing it high up—on a shelf rather than on the floor—and away from metal objects helps the signal travel farther. If you cannot move your modem to a better spot, a mesh system or a second router set up as a repeater can extend coverage to dead zones.
Router speeds and what the numbers mean
Router specs list speeds like "AC1200" or "AX6000". The letters refer to the Wi-Fi standard: AC is older and slower, AX (also called Wi-Fi 6) is newer and faster. The number is the theoretical maximum speed in megabits per second, but you will never see that in real use. It assumes perfect conditions, no interference, and a device sitting right next to the router.
For most homes, an AC1200 or AC1750 router is plenty for streaming, video calls, and web browsing on multiple devices. If you have many people working from home, gaming, or uploading large files regularly, an AX router (Wi-Fi 6) is worth the extra $30 to $50. The actual speed you see depends on your internet plan, your device's Wi-Fi chip, and how far you are from the router—not just the router's rated speed.
Basic router features to consider
Most routers let you change the Wi-Fi password, set up a guest network for visitors, and restart the device from a phone app. Some have parental controls to limit what devices can access or when they can connect. More expensive models offer advanced features like the ability to prioritize certain devices or apps, built-in security scanning, or the option to split your network into separate bands for different uses.
For a typical home, the standard features are enough. You do not need a $300 gaming router unless you are running online tournaments or have dozens of connected devices. A $60 to $100 router from a major brand like TP-Link, Netgear, or ASUS will handle most households reliably for three to five years before it slows down or fails.
When to replace your router
A router typically lasts three to five years before performance drops noticeably. Signs it is time to replace it include devices dropping connection frequently, slow speeds even when you are close to the router, or the device overheating. Restarting the router fixes the problem temporarily, but if you are doing that more than once a month, replacement is usually cheaper than troubleshooting.
You do not need to replace your modem when you replace your router—they are separate devices. Unplug the old router, plug in the new one, connect it to your modem with an ethernet cable, and follow the setup steps that come in the box. Most routers are ready to use within five minutes.
Frequently Asked Questions
Can I use a router without a modem?
No. A router needs an internet signal from a modem to broadcast. Without a modem, the router has nothing to share. You need both pieces for Wi-Fi to work.
Do I have to use the router my internet company gives me?
Most providers let you use your own router instead of renting theirs. You still need their modem (or a compatible one you buy separately), but you can plug any router into it. Buying your own router usually saves money over time compared to renting.
What is the difference between Wi-Fi and the internet?
The internet is the data traveling through cables from your provider. Wi-Fi is the wireless signal your router broadcasts so devices can connect to that data without cables. You can have internet without Wi-Fi (using ethernet cables), but you cannot have Wi-Fi without internet.
How many devices can connect to one router?
Most home routers can handle 50 to 100 connected devices, though performance drops if many are actively using data at once. A typical home with phones, laptops, tablets, and smart home devices usually has 15 to 30 active connections, which any modern router handles easily.
Should I leave my router on all the time?
Yes. Routers are designed to run continuously and use very little power. Turning it off and on repeatedly can actually shorten its lifespan. If you want to save power, unplug it at night only if you do not need Wi-Fi then—most people leave it running.