Start with the basics: internet and power

Most PlayStation Network problems come from a loose cable or a router that needs to restart. Before you troubleshoot the network itself, check that your console is plugged in firmly, your ethernet cable (if you use one) is seated all the way into both the console and the wall, and your Wi-Fi password is correct if you are using wireless.

Restart your router by unplugging it for 30 seconds, then plugging it back in. While it boots up, restart your PlayStation: hold the power button on the front of the console for three seconds until it beeps, then wait for it to shut down completely. Turn it back on and try to connect to the network again.

If you use Wi-Fi, move closer to the router or switch to an ethernet cable if you have one available. Wi-Fi drops are the single most common cause of network timeouts and sign-in failures.

Key Takeaways

  • Restart your router and PlayStation console before trying anything else — most connection problems clear up this way.
  • Check your internet speed using the console's built-in test; PlayStation 4 needs at least 2.5 Mbps read and PlayStation 5 needs at least 35 Mbps for 4K gaming.
  • If you cannot sign in, go to Settings > Users and Accounts > Other and select "Restore Licenses" to fix permission errors without losing your games.
  • Rebuild your console's database from Safe Mode if you see error codes or repeated connection drops after restarting.
  • If the PlayStation Network service itself is down, check the official PlayStation Status page before spending time troubleshooting your own equipment.

Test your internet speed and connection quality

Your PlayStation has a built-in connection test that shows you exactly what speed you are getting. Go to Settings > Network > Test Internet Connection. The console will run a read and upload test and show you the results on screen.

PlayStation 4 needs at least 2.5 Mbps read speed to sign in and use the network. PlayStation 5 needs at least 35 Mbps read if you want to play 4K games, though 10 Mbps is enough for standard resolution. If your test shows less than 2.5 Mbps, your internet connection itself is the problem — contact your internet provider or move closer to your router.

If the test hangs or times out, your console cannot reach PlayStation's servers at all. This usually means your router is blocking the connection. Write down any error code that appears and move to the next section.

Check the PlayStation Network status page

Before you change any settings on your console, visit the official PlayStation Network Status page at status.playstation.com. This page shows you whether PlayStation's servers are down for maintenance or experiencing an outage in your region.

If the status page shows a red alert for "Sign-In" or "Network Services," the problem is not your console or internet — it is PlayStation's servers. In that case, wait for the service to come back online. There is nothing you can fix on your end.

If the status page shows everything is green and working, the problem is on your side. Continue with the next steps.

Rebuild your console database from Safe Mode

If restarting did not work and your internet test passed, your console's database may be corrupted. This is the most reliable fix for repeated connection drops, sign-in loops, or error codes like CE-33987-0 or NW-31456-8.

To enter Safe Mode, hold the power button on the front of your console for seven seconds until you hear two beeps. The console will shut down and restart into Safe Mode. From the menu, select "Rebuild Database." This process scans your hard drive and rebuilds the file system — it does not delete your games or saves, but it can take 30 minutes to several hours depending on how much data you have.

Do not turn off the console while the database is rebuilding. When it finishes, your console will restart normally. Try to sign in and connect to the network again.

Restore licenses if you cannot sign in

If you can reach the sign-in screen but your account will not sign in, or if you see an error about your account or permissions, go to Settings > Users and Accounts > Other > Restore Licenses. This fixes permission errors that prevent you from accessing the network or your games without deleting anything.

Restoring licenses takes a few minutes and requires an internet connection. Your console will contact PlayStation's servers and re-read the rights to play the games on your account. After it finishes, restart the console and try to sign in again.

This step is also useful if you recently changed your PlayStation Network password or if you are trying to sign in on a console that is not your primary account console.

Change your DNS settings if you see network timeouts

If your internet test passes but you still cannot sign in or you see timeouts when trying to read games, your router's DNS settings may be blocking PlayStation's servers. You can tell your console to use a different DNS server instead of the one your router provides.

Go to Settings > Network > Set Up Internet Connection. Choose your connection type (Wi-Fi or LAN Cable). Select "Custom" and keep the settings the same until you reach DNS Settings. Change it from "Automatic" to "Manual" and enter 8.8.8.8 for Primary DNS and 8.8.4.4 for Secondary DNS (these are Google's public DNS servers). Save and test your connection again.

If that does not work, try 1.1.1.1 for Primary and 1.0.0.1 for Secondary (Cloudflare's DNS). One of these usually clears up DNS-related timeouts.

Check your router's firewall and port settings

Some routers block the ports that PlayStation uses to connect to the network. If you have already restarted, tested your speed, and rebuilt your database, your router may be the problem.

Log into your router's settings (usually by typing your router's IP address into a web browser — check the sticker on the back of the router for the address). Look for a section called "Firewall," "Port Forwarding," or "UPnP." Make sure UPnP is turned on if your router has that option — this lets your PlayStation automatically open the ports it needs.

If you do not feel comfortable changing router settings, restart the router one more time and try a different internet connection if you have one available (like a mobile hotspot) to see whether the problem is your router or your internet service.

Frequently Asked Questions

What does error code NW-31456-8 mean?

This error means your console cannot reach PlayStation's servers, usually because of a network timeout or firewall block. Restart your router and console first. If that does not work, rebuild your database from Safe Mode or change your DNS settings as described above.

Can I fix this without restarting my console?

Not usually. A restart clears temporary connection errors and resets your network connection. It takes two minutes and fixes most problems. If restarting does not work, the issue is deeper and requires the database rebuild or DNS change.

Why does my PlayStation keep signing me out?

This usually means your internet connection is dropping repeatedly. Check your Wi-Fi signal strength or switch to an ethernet cable. If you are using ethernet and still getting signed out, restart your router and rebuild your console's database. Repeated sign-outs can also mean your account password was changed on another device — sign out everywhere and sign back in.

Is my PlayStation broken if none of these steps work?

Probably not. If you have restarted, tested your speed, checked the status page, and rebuilt your database, the problem is almost always your internet connection or router, not your console. Try connecting to a different network (a friend's Wi-Fi or a mobile hotspot) to confirm. If it works on a different network, contact your internet provider.

Do I need to reinstall my games after rebuilding the database?

No. Rebuilding the database does not delete your games or saves. It only repairs the file system that tells your console where everything is stored. Your games and saves stay exactly where they are.