The Basic Power-On Steps

To turn on your PlayStation 4, press the power button on the front of the console. The button is a small circle located on the lower left side of the PS4's face panel. You will hear a beep and see the console light up — the indicator light on the front will glow white, then turn blue once the system has fully booted.

The entire startup process takes about 30 seconds to a minute. During this time, the PS4 loads its operating system and prepares to accept controller input. You do not need to hold the button down; a single press is enough.

If the console does not respond to a button press, check that the power cable is firmly connected to both the back of the PS4 and the wall outlet. A loose connection is the most common reason a console will not power on.

Key Takeaways

  • The power button is a small circle on the lower left of the PS4's front panel, and a single press turns the console on.
  • The startup process takes about 30 seconds to a minute, and the indicator light will turn blue when the system is ready.
  • If the console does not turn on, check that the power cable is fully connected at both the console and the wall outlet.
  • You can also use a PS4 controller to power on the console by pressing the PS button if the system is in rest mode.
  • Holding the power button for several seconds will shut the console down, which is different from putting it into rest mode.

Using a Controller to Power On

If your PS4 is in rest mode (a low-power state where the console is not fully off), you can turn it on using a PS4 controller. Press the PS button — the large button in the center of the controller — and the console will wake up and return to full power.

Rest mode is useful if you want to keep your PS4 running without using much electricity. Downloads and uploads can continue while the console is in rest mode, and you can wake it remotely from a controller without walking to the console itself.

The Difference Between Rest Mode and Power Off

Rest mode and power off are not the same thing. When you put the PS4 into rest mode, the console stays connected to power and can read updates or games in the background. The indicator light will pulse slowly, showing that the system is in a low-power state.

To fully power off the console, hold the power button on the front for several seconds until you hear two beeps. The indicator light will turn off completely, and the console will draw almost no power. If you plan to unplug the PS4 or will not use it for a long time, powering it off completely is the better choice.

You can also power off the console through the settings menu. Go to Power, then select Power Off. This method is gentler on the system than holding the button, though both methods work.

What to Do If the Console Will Not Turn On

If pressing the power button does nothing, the first step is to check the power cable. Trace it from the back of the PS4 to the wall outlet and make sure both connections are tight. If the cable is loose, push it firmly into place and try the power button again.

If the cable is connected properly and the console still will not turn on, try unplugging it from the wall for 30 seconds, then plugging it back in. This can reset the power supply and sometimes fixes startup issues. Wait a few seconds after plugging it back in, then press the power button.

If the console still does not respond, the power supply itself may be faulty. The PS4 power supply is a separate unit that connects to the back of the console. You can purchase a replacement power supply from electronics retailers, though this is a less common problem than a loose cable.

Using the Controller When the Console Is Off

If the PS4 is completely powered off (not in rest mode), pressing the PS button on a controller will not turn it on. You must use the physical power button on the console itself. The controller can only wake the system from rest mode, not from a full shutdown.

This is an important distinction because it means you cannot turn on the console from across the room if it is fully off. You will need to walk to the console and press the front button.

Checking the Power Indicator Light

The indicator light on the front of the PS4 tells you the console's power state. A white light means the system is starting up. A blue light means the console is fully on and ready to use. A pulsing light means the console is in rest mode. No light at all means the console is powered off.

If you press the power button and see no light at all after waiting 10 seconds, the console is not receiving power. Check the cable connections again and make sure the outlet itself is working by plugging in another device, such as a lamp.

Frequently Asked Questions

Can I turn on my PS4 with just the controller?

Only if the console is in rest mode. If the PS4 is completely powered off, you must press the physical power button on the front of the console. The PS button on the controller can wake the system from rest mode but cannot turn it on from a full shutdown.

How long does it take for the PS4 to fully start up?

The startup process usually takes 30 seconds to one minute. During this time, the console loads its operating system and prepares to accept input. You will see the indicator light change from white to blue when the system is ready to use.

What does it mean if the power button does not work?

First, check that the power cable is fully connected at both the console and the wall outlet. If the cable is loose, push it in firmly and try again. If the cable is connected and the button still does not work, try unplugging the console for 30 seconds and plugging it back in. If it still does not respond, the power supply may need to be replaced.

Is rest mode the same as turning off the console?

No. Rest mode keeps the console connected to power and allows downloads to continue in the background. Power off completely shuts down the system and uses almost no electricity. Use rest mode if you plan to use the console again soon, and power off if you will not use it for a while.

What should I do if my PS4 will not turn on after being unplugged?

Wait at least 30 seconds after unplugging before plugging it back in. This gives the power supply time to reset. After plugging it back in, wait a few more seconds before pressing the power button. If the console still will not turn on, the power supply may be damaged and need replacement.