Where to Find the Brightness Setting
The brightness control on your PlayStation 5 is in the Settings menu under Screen and Video. You do not need to restart your console or change any cables—the adjustment takes effect when ready on your TV screen.
Start by pressing the PS button on your controller to open the Control Center. From there, select Settings (the gear icon), then go to Screen and Video. You will see Brightness listed near the top of that menu, alongside other display options like resolution and refresh rate.
Key Takeaways
- Brightness is found in Settings > Screen and Video, and changes take effect right away without restarting.
- The brightness slider ranges from 0 to 100, and the default setting is usually 50.
- Adjust brightness in a normally lit room to match how you actually play, not in darkness or bright sunlight.
- If your TV has its own brightness control, lowering the PS5 brightness first prevents the image from becoming washed out.
How to Use the Brightness Slider
Once you open the Brightness menu, you will see a horizontal slider with a number from 0 to 100. The default is usually set to 50. Press right on the D-pad or analog stick to increase brightness, or left to decrease it. Watch the preview image on your screen change as you move the slider.
Move the slider slowly and stop when the image looks right to you. The preview shows a straightforward gradient, which helps you see whether dark areas are too dark or light areas are too bright. There is no single "correct" number—it depends on your TV, your room lighting, and your own eyesight.
Finding the Right Brightness for Your Setup
The best brightness setting depends on how bright your room is when you play. If you adjust the brightness in a dark room but usually play in daylight, the image will look too dark during the day. Adjust it in the lighting conditions where you actually use your console most of the time.
A good starting point is to set brightness so that dark areas in games (like shadows or night scenes) still show detail, but are not so bright that they look gray. If you are squinting at the screen or the image looks washed out, you have found the wrong end of the range. Most players find a setting between 40 and 70 works well, but your TV model and room make a real difference.
The Difference Between PS5 Brightness and TV Brightness
Your TV also has its own brightness control, separate from the PlayStation 5 setting. The PS5 brightness only affects what the console sends to your TV—it does not change your TV's hardware. If you lower the PS5 brightness all the way down and then raise your TV's brightness to compensate, you may end up with a washed-out, low-contrast image.
A better approach is to adjust the PS5 brightness first, then use your TV's brightness control only if you need fine-tuning. Most TVs come with brightness set too high from the factory, so you may find that lowering the PS5 brightness and leaving the TV alone gives you a sharper picture than raising both.
When to Adjust Brightness During Gameplay
You can change brightness while a game is running—you do not have to quit or pause. Press the PS button, go to Settings > Screen and Video > Brightness, make your adjustment, and close the menu. The change happens when ready, so you can see right away whether the new setting works better for that particular game.
Some games are darker or lighter than others by design. A game set in a cave or at night may look too dark at your normal brightness, while a bright outdoor game might look washed out. Rather than changing your console setting for every game, try adjusting the in-game brightness slider first—many games have their own brightness menu in the options. That way you keep your PS5 setting consistent and only tweak individual games when needed.
Troubleshooting Brightness Problems
If the brightness slider does not seem to work, or if the image does not change when you move it, check your HDMI cable first. A loose or damaged cable can prevent the PS5 from sending the correct signal to your TV. Unplug the HDMI cable from both the console and the TV, wait a few seconds, and plug it back in firmly.
If the image is still too dark or too bright after adjusting the PS5 brightness all the way to 100 or all the way to 0, the problem is likely your TV, not your console. Check your TV's brightness and contrast settings in its own menu. You can also try a different HDMI port on your TV—some ports have different picture quality than others, especially on older TVs.
Frequently Asked Questions
What is the default brightness setting on PS5?
The default brightness is usually set to 50 on the 0-to-100 scale. You can always return to this number if you want to start over, though you may find a different setting works better for your TV and room.
Does brightness affect game performance or frame rate?
No. Brightness is purely a display setting and does not change how fast your console runs or how many frames per second your games display. Adjusting it will not make games run slower or faster.
Can I set different brightness levels for different games?
The PS5 brightness setting applies to all games and apps. However, many games have their own in-game brightness slider in their settings menu, so you can adjust individual games without changing your console setting.
Why does my screen look washed out even at maximum brightness?
Your TV's brightness may be set too low, or the HDMI cable may not be making a good connection. Try raising your TV's brightness in its own menu, or check that the HDMI cable is plugged in firmly at both ends. If you have another HDMI port available, try that one.
Should I adjust brightness differently for HDR games?
HDR games (high dynamic range) often look best at a lower brightness setting than standard games, because they use a wider range of light and dark. If an HDR game looks too bright, try lowering the PS5 brightness by 5 to 10 points and see if that helps. You can always change it back for non-HDR games.