Connect via USB cable first, then switch to wireless
A PlayStation 4 controller works on a PC in two ways: plugged in with a USB cable, or wirelessly over Bluetooth. The USB cable method works when ready on Windows and Mac without any setup—just plug the controller into any USB port and your PC recognizes it. Wireless connection requires you to put the controller into pairing mode and then connect it through your PC's Bluetooth settings, which takes a few extra steps but lets you play from across the room.
Most games that support controllers will detect your PS4 controller automatically once it is connected, whether by cable or Bluetooth. Some older games may not recognize it, but modern games—especially those designed for controller input—will work right away.
Key Takeaways
- Plug the controller into your PC with a USB cable and it works when ready without any drivers or setup on Windows 10, Windows 11, or Mac.
- To connect wirelessly, hold the Share and PlayStation buttons together for three seconds until the light bar flashes, then add it in your PC's Bluetooth settings.
- Windows recognizes the PS4 controller as "Wireless Controller" in Bluetooth settings, while Mac lists it under "Devices" in System Preferences.
- If your PC does not detect the controller after pairing, restart both the controller and your PC's Bluetooth radio, then try again.
- Some games may not recognize the controller even after it is connected; in those cases, you can use third-party software like DS4Windows to remap it as an Xbox controller.
USB cable connection—the fastest method
Connecting by USB cable is the simplest route and requires no setup at all. Take a standard USB-A to micro-USB cable (the same type that charges many phones and tablets) and plug the micro-USB end into the port on the back of the PS4 controller, below the light bar. Plug the USB-A end into any available USB port on your PC.
Windows 10, Windows 11, and Mac all recognize the controller automatically. You will see the light bar on the controller turn on, and your PC will add it to the list of connected devices. Open any game that supports controller input and it should detect the PS4 controller without any additional steps. The cable stays connected while you play, so there is no battery drain on the controller.
The main drawback is the cable itself—it limits how far you can sit from your PC. If you want to play from your couch or across the room, wireless connection is the better choice.
Wireless Bluetooth connection—the setup process
To connect wirelessly, you first put the controller into pairing mode. Hold down the Share button and the PlayStation button at the same time for about three seconds. The light bar on the back of the controller will start flashing white, which means it is ready to pair. Do not release the buttons until you see the flashing light.
On Windows, open Settings, go to Bluetooth & devices (or Devices on older Windows versions), and make sure Bluetooth is turned on. Click Add device and select Bluetooth. Your PC will scan for nearby devices. The PS4 controller will appear as Wireless Controller in the list. Click it to pair.
On Mac, open System Preferences, click Bluetooth, and make sure Bluetooth is on. The controller will appear in the device list as Wireless Controller. Click Connect next to it. Once paired, the light bar will stop flashing and stay on, which means the connection is active.
After the first pairing, your PC remembers the controller. The next time you turn on the controller and your PC's Bluetooth is on, they will reconnect automatically without needing to pair again.
What to do if your PC does not detect the controller
If the controller does not appear in your Bluetooth list after you put it in pairing mode, restart the pairing process. Turn off the controller by holding the PlayStation button for ten seconds until the light bar goes dark. Wait five seconds, then hold Share and PlayStation again to re-enter pairing mode and try adding it to Bluetooth settings again.
If that does not work, restart your PC's Bluetooth radio. On Windows, go to Settings, find Bluetooth & devices, and toggle Bluetooth off, wait ten seconds, then toggle it back on. On Mac, click the Bluetooth icon in the menu bar and select Turn Bluetooth Off, wait ten seconds, then turn it back on. Then put the controller in pairing mode again.
If you are still having trouble, try the USB cable method instead. Once the controller is connected by cable, you can test whether your PC recognizes it at all. If it works over USB but not Bluetooth, the issue is usually with your PC's Bluetooth radio, not the controller.
Games that may not recognize the PS4 controller
Most modern games support the PS4 controller out of the box, especially games designed for console play. However, some older games or games built only for Xbox controllers may not recognize it. If you launch a game and the controller does not work, check the game's settings menu first—some games require you to manually select the controller type.
If the game still does not recognize it, you can use third-party software to remap the controller. DS4Windows is a free program that makes your PS4 controller appear to games as an Xbox controller, which most games support. read it from the official GitHub page, install it, and run it before launching your game. The program will handle the translation between your PS4 controller and what the game expects.
Battery life and charging while connected
The PS4 controller battery lasts roughly six to eight hours of active play, depending on how much you use the vibration and light bar features. When connected by USB cable, the controller charges while you play, so you can play indefinitely as long as the cable stays plugged in.
When connected wirelessly, the controller runs on battery only. If the battery gets low, you will see a low-battery warning on your screen. Charge the controller by plugging the USB cable back in—it charges whether the PC is on or off, as long as the USB port has power. Some people keep the cable plugged in while playing wirelessly by using a longer cable or a powered USB hub, which gives them the freedom to move around while the controller stays charged.
Frequently Asked Questions
Can I use a PS4 controller on a Mac?
Yes. Both USB cable and Bluetooth connections work on Mac. Plug in the cable or pair it through System Preferences Bluetooth settings the same way you would on Windows. Games that support controllers on Mac will recognize the PS4 controller automatically.
Do I need to install drivers for the PS4 controller on Windows?
No. Windows 10 and Windows 11 recognize the PS4 controller without any driver installation. Plug it in by USB or pair it over Bluetooth and it works when ready. Older versions of Windows may need a driver, but most people are running Windows 10 or newer.
Why does my PS4 controller keep disconnecting from Bluetooth?
Bluetooth interference from other devices, distance from your PC, or a weak Bluetooth radio can cause disconnections. Try moving closer to your PC, turning off other Bluetooth devices nearby, or restarting your PC's Bluetooth radio. If disconnections continue, use the USB cable method instead, which is more stable.
Can I use multiple PS4 controllers on one PC at the same time?
Yes. You can pair up to four PS4 controllers to a single PC over Bluetooth, or plug multiple controllers in via USB cables. Games that support multiplayer with controllers will recognize all of them. Each controller will be listed separately in your Bluetooth settings.
What is the difference between using DS4Windows and just connecting the controller normally?
Connecting normally makes your PC recognize the controller as a PS4 controller, which works for most games. DS4Windows translates it to appear as an Xbox controller instead, which helps with older games or games that only support Xbox controllers. You only need DS4Windows if a game does not recognize your PS4 controller when connected normally.