Connect a PS5 Controller to Your PlayStation 5 Console
The fastest way to connect a PS5 controller to your console is with a USB cable. Plug the included USB-C to USB-A cable into the controller's charging port and into any USB port on the front or back of your PlayStation 5. The console will recognize the controller within seconds — you do not need to press any buttons or wait for a pairing screen. Once connected by cable, you can start playing when ready.
If you want to use the controller wirelessly, press and hold the Create button and the PS button together for three seconds until the light bar on the back of the controller starts blinking white. This puts the controller into pairing mode. On your PS5, go to Settings > Accessories > Controllers > Wireless Controller Settings, then select "Pair New Controller." The console will find the controller and connect automatically. The light bar will stop blinking once pairing is complete.
You can pair up to four controllers to a single PS5 console. Each controller pairs only to one console at a time, so if you move a controller to a different PS5, you will need to pair it again on that console.
Key Takeaways
- A USB-C cable plugged directly into the controller and console is the simplest connection method and works when ready without setup.
- Wireless pairing requires holding Create and PS buttons for three seconds, then selecting "Pair New Controller" in the console settings.
- You can connect up to four controllers to one PS5, but each controller pairs to only one console at a time.
- A controller that will not pair may need a firmware update, which happens automatically when connected by USB cable to the console.
Pair a PS5 Controller to a PC or Mac
To connect a PS5 controller to a Windows PC, put the controller into pairing mode by holding Create and PS together for three seconds. On your PC, go to Settings > Bluetooth & Devices > Add Device, select Bluetooth, and choose the controller from the list. Windows will pair it when ready. Once paired, the controller will reconnect automatically when you turn it on near the PC.
On a Mac, hold Create and PS for three seconds to enter pairing mode. Open System Settings > Bluetooth, wait for the controller to appear in the list, and click the plus icon next to it. The Mac will complete the pairing in a few seconds. Like Windows, the controller will reconnect on its own when powered on near the Mac.
Some games on PC and Mac recognize the PS5 controller natively, while others may require you to map the buttons manually or use a third-party tool. Check the game's settings first — most modern titles support it without extra steps.
Connect a PS5 Controller by USB Cable to Other Devices
You can use a PS5 controller on phones and tablets by connecting it with a USB-C cable, though wireless pairing over Bluetooth works on most modern Android devices. For iPhones and iPads, a wired USB-C connection requires a USB-C to Lightning adapter or a USB-C hub, and even then, support depends on the specific game or app.
Android phones and tablets pair with PS5 controllers the same way as a PC: hold Create and PS for three seconds, then go to Bluetooth settings and select the controller from the available devices. Once paired, many Android games will recognize the controller automatically. Check your game's control settings to confirm.
iOS devices (iPhones and iPads) have limited support for PS5 controllers. Some games work with a wired connection, but wireless pairing is not reliable on iOS. If you want to use a PS5 controller on an Apple device, a USB-C cable is usually your only option, and even then, the game must be designed to support it.
Troubleshoot a Controller That Will Not Connect
If a PS5 controller will not pair wirelessly, connect it to the console with a USB cable first. This allows the console to check for and install any firmware updates the controller needs. Leave it plugged in for at least two minutes, then try wireless pairing again. Many connection problems are solved by a firmware update alone.
If the controller still will not pair after an update, forget the controller from your console and try pairing it again. On the PS5, go to Settings > Accessories > Controllers > Wireless Controller Settings, find the controller in the list, and select "Forget." Then put the controller into pairing mode and pair it as if it were new.
If the light bar does not turn on when you press buttons or charge the controller, the battery may be completely dead. Plug it in with a USB cable and wait at least 30 minutes before trying to pair it again. If the light bar still does not respond after a full charge, the controller may have a hardware problem and may need replacement.
Understand Controller Battery and Charging
A PS5 controller holds a charge for roughly 12 hours of active play, though this varies depending on how much you use the haptic feedback and adaptive triggers — features that make the controller vibrate and resist in specific ways. Heavier use of these features drains the battery faster.
Charge the controller by plugging the USB-C cable into the port on the back and connecting it to any USB power source: the PS5 console itself, a wall adapter, a PC, or a portable battery pack. The controller charges whether the console is on or off. A full charge from empty takes roughly two to three hours.
You do not need to turn off the controller to charge it. It will charge while you are using it, though charging is slower if the controller is actively connected and in use. If you want faster charging, plug it in while the console is off or in rest mode.
Use Multiple Controllers on the Same Console
Once you have paired a second, third, or fourth controller to your PS5, they will all reconnect automatically when you power them on near the console. You do not need to pair them again unless you reset the console or deliberately forget a controller.
In multiplayer games, the console assigns each controller a player number based on the order they connect. The first controller to connect is Player 1, the second is Player 2, and so on. If you want to change which player a controller is assigned to, disconnect and reconnect the controllers in the order you want.
If a controller loses connection during play, it will try to reconnect automatically. If it does not reconnect within a few seconds, move closer to the console or check that the controller is charged. Wireless interference from other devices can occasionally cause temporary disconnections, especially if your console is far from the controller or blocked by obstacles.
Frequently Asked Questions
Can I use a PS5 controller on a PS4?
No. PS5 controllers do not work on a PS4 console, and PS4 controllers do not work on a PS5. Each console uses its own controller design and pairing system. If you want to play on both consoles, you will need controllers for each one.
Why does my controller keep disconnecting?
Disconnections usually happen because the controller battery is low, the console is too far away, or there is wireless interference from other devices. Charge the controller fully, move closer to the console, and try turning off nearby Wi-Fi routers or Bluetooth devices temporarily to see if that helps. If disconnections continue, connect the controller by USB cable and update its firmware.
How do I reset a PS5 controller?
Locate the small reset button on the back of the controller near the L2 trigger. Use a thin object like a paperclip to press and hold it for three to five seconds. The light bar will flash, and the controller will reset to factory settings. You will need to pair it again to your console after resetting.
Can I charge a PS5 controller with any USB-C cable?
Yes. Any USB-C cable will charge a PS5 controller, including cables from phones, tablets, or other devices. You do not need the original cable. The controller will charge from any USB power source, including wall adapters, computers, and portable batteries.
What is the light bar on the back of the controller for?
The light bar shows the controller's status: white blinking means it is in pairing mode, solid white means it is connected, and dim or off means the battery is low or the controller is not powered on. Some games also use the light bar to show information like health or team color during play.