Connect a New Controller Using the Console Menu

The fastest way to connect a new PS5 controller is through your console's settings menu. Turn on your PlayStation 5, then hold the PS button and the Create button on the new controller at the same time for about three seconds until the light bar flashes white. This puts the controller into pairing mode.

On your console, go to Settings, then Accessories, then Controllers. Select Pair New Controller. Your PS5 will search for the controller in pairing mode and connect it within seconds. Once the light bar stops flashing and turns solid, the pairing is complete and you can use the controller right away.

Key Takeaways

  • Hold the PS button and Create button together for three seconds to put a new controller into pairing mode — the light bar will flash white.
  • Go to Settings > Accessories > Controllers > Pair New Controller on your console to complete the connection.
  • A USB-C cable can connect a new controller directly to your PS5 without using the menu, though wireless pairing is faster.
  • If pairing fails, restart both the controller and console, then try the process again from the beginning.
  • You can pair up to four controllers to a single PS5 console at the same time.

Connect a New Controller Using a USB Cable

If the wireless pairing method does not work, you can connect the new controller with a USB-C cable. Plug the cable into the USB-C port on the bottom of the controller and into any USB port on the front of your PS5. The console will recognize the controller and install any needed software automatically.

Once the light bar turns solid white, the controller is connected. You can unplug the cable and use the controller wirelessly from that point forward. This method is useful if your console is far from where you are standing or if the wireless pairing is not responding.

Troubleshoot When Pairing Fails

If the controller light bar does not flash white after holding the PS and Create buttons, the battery may be too low. Plug the controller into your PS5 with a USB-C cable and let it charge for at least 30 minutes, then try pairing again.

If pairing still fails, restart your PS5 completely by holding the power button for 10 seconds until the console shuts down. Wait 30 seconds, turn it back on, and try pairing the new controller again. If the problem continues, try pairing the controller to a different PS5 console if you have access to one — this tells you whether the issue is with the controller or your specific console.

Pair Multiple Controllers to One Console

Your PS5 supports up to four controllers connected at the same time. To add a second, third, or fourth controller, repeat the pairing steps for each new controller one at a time. Put each controller into pairing mode, then go to Settings > Accessories > Controllers > Pair New Controller on your console.

Each controller will be assigned a player number (1, 2, 3, or 4) once it connects. The player numbers appear on the light bar — player one shows a white light, player two shows red, player three shows blue, and player four shows pink. This makes it straightforward to tell which controller belongs to which player during multiplayer games.

Check Your Controller Battery and Firmware

After pairing, check your controller's battery level by going to Settings > Accessories > Controllers on your PS5. The console will show you the current charge percentage for each connected controller. A new controller should arrive with some battery, but charging it fully before your first gaming session ensures the best performance.

Your PS5 will also notify you if a firmware update is available for the controller. If you see an update prompt, connect the controller with a USB-C cable and let the update install while the console is on. Do not unplug the cable or turn off the console during this process.

Use Your New Controller Right Away

Once pairing is complete, your new controller works when ready for any game or app on your PS5. You do not need to configure anything else — the console recognizes it as a standard PS5 controller with all features active, including haptic feedback and adaptive triggers.

If you are using the controller for the first time in a specific game, that game may ask you to map buttons or adjust settings. This is normal and happens only once per game. After that, your controller settings are saved and the game will launch with your preferences already in place.

Frequently Asked Questions

How long does it take to pair a new PS5 controller?

Pairing usually takes 10 to 30 seconds once you start the process through the Settings menu. If it takes longer than a minute, cancel and try again. Make sure the controller is in pairing mode (light bar flashing white) before you select Pair New Controller on your console.

Can I pair a PS5 controller to my PS4?

No. PS5 controllers do not work with PlayStation 4 consoles. You will need a PS4 controller to play on a PS4. However, PS4 controllers can connect to a PS5 and work with most games, though some newer titles may require a PS5 controller.

What if my new controller will not hold a charge?

A brand-new controller should charge fully within two to three hours using a USB-C cable. If it drains when ready after charging, the battery may be defective. Contact the retailer or manufacturer for a replacement — controllers typically come with a one-year warranty.

Do I need to unpair a controller before pairing a new one?

No. You can pair a new controller without removing an old one. Your PS5 supports up to four controllers at once. If you want to remove a controller from your console, go to Settings > Accessories > Controllers and select the controller you want to unpair, then choose Forget Device.