Connect via Bluetooth in three steps

A PlayStation 5 or PlayStation 4 controller connects to your Mac through Bluetooth — the same wireless technology that pairs headphones or mice. You do not need a cable, a dongle, or any software beyond what your Mac already has. The process takes about two minutes.

Put your controller into pairing mode by holding the PlayStation button and the Share button together for three seconds. The light bar on the back will flash white, which means it is ready to pair. On your Mac, open System Settings, click Bluetooth, and wait for your controller to appear in the list — it will show as "Wireless Controller" for a PS4 or "PS5 Controller" for a PS5. Click it, and the pairing is done.

Once paired, your controller will reconnect automatically the next time you turn it on and your Mac is nearby. You do not have to repeat the pairing process unless you pair the controller with a different device.

Key Takeaways

  • Hold the PlayStation button and Share button together for three seconds to enter pairing mode; the light bar will flash white.
  • Open System Settings on your Mac, go to Bluetooth, and select your controller from the list to complete the connection.
  • After the first pairing, your controller will reconnect automatically whenever you turn it on near your Mac.
  • Both PS4 and PS5 controllers work with Mac, though they appear with different names in the Bluetooth menu.
  • If your controller does not appear in Bluetooth settings, restart both the controller and your Mac, then try pairing again.

What to do if your controller does not show up

If your controller does not appear in the Bluetooth list after you put it into pairing mode, restart both devices. Turn off your controller by holding the PlayStation button for ten seconds until the light bar goes dark. Restart your Mac normally. Then put the controller back into pairing mode and check Bluetooth settings again.

If it still does not appear, forget any previous pairing. In System Settings, click Bluetooth, find your controller in the list (even if it is grayed out), click the X next to it, and remove it. Then put the controller into pairing mode again and add it fresh.

Make sure your Mac's Bluetooth is actually on. Some Macs turn off Bluetooth when you close the lid or switch users. Click the Bluetooth icon in the menu bar at the top of your screen — if it shows a crossed-out Bluetooth symbol, click it and turn Bluetooth back on.

Using your controller with games and apps

Once your controller is paired, most games and apps on your Mac will recognize it automatically. Games built for PlayStation controllers — including many titles on Steam, Epic Games, and the Mac App Store — will let you use it right away without any setup. The buttons and sticks work as they do on a PlayStation console.

Some older games or apps may not recognize your controller. In those cases, you can use a tool like Controlly or Joystick Doctor to map your controller buttons to keyboard keys. These are free programs you read from the Mac App Store or their websites. They let you tell your Mac what each button should do in a specific game.

If a game asks you to choose a controller type, select PlayStation or DualShock if that option appears. Do not select Xbox, as the button layout is different and your inputs will be wrong.

Battery life and charging

A PS5 controller holds a charge for about eight to twelve hours of active play. A PS4 controller lasts slightly longer, around ten to fifteen hours. Both will show a low battery warning on your Mac when the charge drops below 20 percent.

Charge your controller using the USB-C cable that came with it. Plug the cable into the port on the back of the controller and into any USB-C power adapter or your Mac itself. The light bar will turn orange while charging and turn off when the battery is full. Charging from empty takes roughly two to three hours.

If your controller stops responding during use, it has likely run out of battery. Plug it in and wait a few minutes before trying again. Your Mac will show the controller as disconnected until the battery has enough charge to power it.

Connecting multiple controllers at once

You can pair more than one PlayStation controller to your Mac at the same time. Each controller pairs through Bluetooth independently, so put the first one into pairing mode, add it through System Settings, then repeat the process with the second controller. Your Mac will remember both and connect to whichever one you turn on.

Games that support multiplayer will recognize both controllers. Check the game's settings to see whether it lets you use two controllers in the same session — most modern games do, but some older titles may not. If a game only recognizes one controller, try disconnecting the other one temporarily and see if the game picks up the second controller then.

Switching your controller between devices

If you want to use the same controller on your PlayStation console and your Mac, you will need to pair it with each device separately. The controller remembers multiple pairings and will connect to whichever device you turn it on near. Hold the PlayStation button to see which device it is currently connected to — the screen will show the active connection.

To switch from your Mac back to your PlayStation, straightforward turn off Bluetooth on your Mac or move far enough away that the Bluetooth signal drops. Then turn on your PlayStation, and the controller will connect to it instead. You do not have to unpair anything.

Troubleshooting connection drops

If your controller keeps disconnecting from your Mac during use, move closer to your Mac. Bluetooth works best within about thirty feet, but obstacles like walls or metal objects can reduce that range. If you are sitting far from your Mac or there are many walls between you and it, the connection may drop.

Check whether other Bluetooth devices are interfering. Wireless mice, keyboards, headphones, and phones all use the same Bluetooth frequency. If you have many devices paired at once, try turning off the ones you are not using. This frees up bandwidth and can stabilize your controller connection.

Update your Mac to the latest version of macOS. Apple regularly releases updates that improve Bluetooth stability. Go to System Settings, click General, then Software Update to check whether an update is available. After updating, restart your Mac and try using your controller again.

Frequently Asked Questions

Can I use a PS4 controller and a PS5 controller on the same Mac at the same time?

Yes. Both controllers pair through Bluetooth independently, so you can add both to your Mac and use them together in games that support two players. Just pair each one separately through System Settings.

Do I need to install any drivers or software to use my controller on Mac?

No. macOS recognizes PlayStation controllers natively through Bluetooth. You do not need to read anything or install drivers. Just pair it and start using it.

Why does my controller work on my PlayStation but not on my Mac?

Your controller is probably still paired to your PlayStation. Bluetooth devices usually connect to the device they were last used with. Unpair it from your PlayStation first, then pair it with your Mac. Or straightforward move your PlayStation out of Bluetooth range and try connecting to your Mac again.

Can I use a wired connection instead of Bluetooth?

Yes. Plug your controller into your Mac with a USB-C cable, and it will work when ready without any pairing. This is useful if you want to charge while playing or if Bluetooth is not working. Most games recognize the wired connection the same way they recognize Bluetooth.

What should I do if my controller is stuck in pairing mode and will not connect?

Hold the PlayStation button for ten seconds until the light bar goes completely dark. Wait thirty seconds, then try pairing again. If that does not work, forget the controller from your Mac's Bluetooth settings and start fresh.