Connect your headset through the USB port or 3.5mm jack, or pair it wirelessly via Bluetooth

Most PlayStation headsets connect to your PS5 in one of three ways: a USB cable plugged into the console's front or back port, a 3.5mm audio jack into the controller, or wireless pairing through Bluetooth. The method depends on what type of headset you own. USB headsets are recognized when ready once plugged in. Wired 3.5mm headsets work the same way—plug them into the headphone jack on your DualSense controller. Wireless headsets require you to put them in pairing mode and then search for them in your PS5 settings.

Once connected, your headset becomes your default audio output for game chat and system sounds. You can switch between headset audio and TV speakers in your sound settings at any time, and you can adjust microphone levels if your headset has a mic.

Key Takeaways

  • USB headsets plug into either USB port on the PS5 and work when ready without any setup steps.
  • 3.5mm wired headsets connect to the headphone jack on your DualSense controller, not the console itself.
  • Wireless headsets must be put into pairing mode first, then found in Settings > Sound > Audio Output on your PS5.
  • After connecting, test your microphone in Settings > Sound > Microphone to make sure chat audio works both ways.

Connecting a USB headset

USB headsets are the simplest to set up because the PS5 recognizes them as soon as you plug them in. Locate one of the USB ports on your PS5—there are two on the front of the console below the disc drive, and two on the back. Plug your headset's USB cable into any available port.

The PS5 will detect the headset automatically. Open Settings > Sound > Audio Output and confirm that your headset appears in the list of output devices. Select it if it is not already highlighted. Your headset is now ready to use for both game audio and party chat.

If your USB headset has a mute button or volume dial on the cable or ear cup, those controls work when ready—you do not need to configure them in settings.

Connecting a 3.5mm wired headset to your controller

The DualSense controller has a 3.5mm headphone jack on the bottom edge. Plug your wired headset directly into this jack. The PS5 will recognize the connection and route audio to the headset automatically.

Go to Settings > Sound > Audio Output and verify that your headset is selected. If you have a microphone on your headset, test it by going to Settings > Sound > Microphone and speaking into it—you should see the microphone level meter respond to your voice.

One advantage of controller-connected headsets is that you can unplug them and move between controllers without unplugging from the console. The downside is that the controller's battery drains slightly faster when a headset is plugged in.

Pairing a wireless headset via Bluetooth

Wireless headsets pair through your PS5's Bluetooth radio. First, put your headset into pairing mode—this usually means holding down a button on the headset for three to five seconds until a light blinks or changes color. Check your headset's manual if you are unsure which button or how long to hold it.

On your PS5, go to Settings > Bluetooth Accessories. Your headset should appear in the list of available devices. Select it and confirm the pairing. The PS5 will remember your headset, so future connections happen automatically when you turn the headset on.

Once paired, open Settings > Sound > Audio Output and select your headset from the list. Test your microphone in Settings > Sound > Microphone to confirm it is working. If the microphone does not respond, go back to Bluetooth Accessories, select your headset, and choose "Forget" to unpair it, then repeat the pairing process.

Switching between headset and TV speakers

You can change your audio output at any time without unplugging anything. Go to Settings > Sound > Audio Output and select either your headset or your TV from the list. The PS5 will switch when ready.

If you want to hear game audio through your TV but still use your headset microphone for party chat, go to Settings > Sound > Microphone and make sure your headset microphone is selected even if your audio output is set to TV speakers. This lets you hear the game on your TV while your friends hear you through the headset.

Adjusting microphone levels and testing chat

If your headset has a microphone and you are having trouble with party chat, the microphone level may be too low or too high. Go to Settings > Sound > Microphone and speak into your headset while watching the level meter. It should move noticeably when you talk but not spike into the red zone.

If the meter does not move at all, your microphone is not being detected. Unplug or unpair your headset, wait ten seconds, and reconnect it. Then check the microphone settings again. If it still does not work, try the headset on another PS5 or device to rule out a hardware problem.

Before joining a party, test your microphone by going to Settings > Sound > Microphone Test. Speak a few words and listen to the playback to hear how you sound to other players. You can adjust the microphone level slider if you need to be louder or quieter.

Troubleshooting a headset that will not connect

If a USB headset is not recognized, try a different USB port. Some third-party USB devices can interfere with headset detection, so unplug any USB devices you do not need and try again. Restart your PS5 if the headset still does not appear in Audio Output settings.

For wireless headsets that will not pair, make sure the headset is in pairing mode—many headsets exit pairing mode after 30 seconds if no device connects. Put it back into pairing mode and try again. If your headset paired before but will not connect now, go to Settings > Bluetooth Accessories, select the headset, and choose "Forget" to clear the old pairing. Then pair it fresh.

If a 3.5mm headset plugged into your controller produces no sound, check that the jack is fully inserted—it should click into place. Try a different 3.5mm headset if you have one available to rule out a damaged jack on the controller.

Frequently Asked Questions

Can I use a PlayStation 4 headset on my PS5?

Yes. Most PS4 headsets work on PS5 because they use standard USB or 3.5mm connections. Plug them in the same way you would on PS4. Wireless PS4 headsets may require you to re-pair them to your PS5 the first time, but they will work once connected.

Why is my microphone not picking up my voice?

Check that your headset microphone is selected in Settings > Sound > Microphone and that the microphone level slider is not at zero. Speak into the mic while watching the level meter—it should move. If it does not move at all, unplug or unpair the headset and reconnect it. If the meter moves but your friends still cannot hear you, your microphone level may be too low; slide it to the right to increase it.

Can I use two headsets at the same time on one PS5?

No. The PS5 routes audio to one output device at a time. You can pair multiple headsets to your console, but only one will be active. To switch between them, go to Settings > Sound > Audio Output and select a different headset.

Do I need to charge a USB headset?

No. USB headsets draw power from the console through the USB cable, so they never need charging. Wireless headsets have built-in batteries and must be charged separately, usually through a USB cable or charging dock that comes with the headset.

What should I do if my headset keeps disconnecting?

For wireless headsets, move closer to the PS5 to rule out range issues. Check that the headset battery is not low—a dying battery often causes random disconnections. If the headset still disconnects, forget it in Settings > Bluetooth Accessories and pair it again. For USB headsets, try a different USB port or a different USB cable if you have one available.