Connect your PlayStation with an HDMI cable, then power on both devices and select the correct TV input
The fastest way to get your PlayStation running on your TV is to plug an HDMI cable into the HDMI port on the back of your console, run the other end to an HDMI port on your TV, then switch your TV to that input. If your TV has multiple HDMI ports, it does not matter which one you use — they all work the same way. Power on your PlayStation and your TV, and the picture should appear within seconds.
If nothing shows up on screen, the most common reason is that your TV is still tuned to a different input (like cable, antenna, or a streaming device). Use your TV remote to cycle through inputs until you see the PlayStation startup screen. Every TV brand labels this differently — look for a button marked Input, HDMI, Source, or TV/Video on your remote.
Key Takeaways
- An HDMI cable is the only connection method you need; it carries both picture and sound in one cable.
- Plug the HDMI cable into any HDMI port on your TV and the HDMI port on the back of your PlayStation console.
- If your screen stays black, use your TV remote to switch to the correct HDMI input — the port number is usually shown on the TV itself.
- Once connected, your PlayStation will automatically detect your TV's resolution and adjust the picture quality without any manual setup.
What you need before you start
You need an HDMI cable, a TV with at least one HDMI port, and your PlayStation console. HDMI cables come in different lengths — 6 feet is standard for most living rooms, but you can buy 10-foot or 15-foot cables if your TV is far from where you want to place your console. Any HDMI cable works; you do not need an expensive one.
Check the back of your TV for HDMI ports before you buy a cable. Most TVs made in the last ten years have at least two HDMI ports. If your TV is older and has no HDMI ports, you will need a different connection method (see the section below on older TVs). PlayStation 4 and PlayStation 5 both have one HDMI port on the back, clearly labeled.
Step-by-step connection for PlayStation 4 and 5
Step 1: Locate the HDMI port on the back of your PlayStation. It is a rectangular port about the size of a USB connector. On PS4, it is on the back left side. On PS5, it is on the back center.
Step 2: Plug one end of the HDMI cable into the PlayStation HDMI port. Push it in until you hear or feel a click — it should not be loose.
Step 3: Run the cable to your TV and plug the other end into any HDMI port on the back or side of the TV. Note which port number it is (usually labeled HDMI 1, HDMI 2, HDMI 3, or HDMI 4).
Step 4: Plug your PlayStation power cable into an outlet and press the power button on the console. The light on the front will turn on, and you should hear a startup sound within a few seconds.
Step 5: Turn on your TV and use the remote to switch to the HDMI input where you plugged in the cable. The PlayStation startup screen should appear. If it does not, try the other HDMI ports on your TV one at a time.
Fixing a black screen or no signal message
If your TV shows "No Signal" or stays completely black, the problem is almost always that your TV is on the wrong input. Pick up your TV remote and look for a button labeled Input, Source, HDMI, or TV/Video. Press it and a menu will appear showing all the inputs your TV can receive. Highlight the HDMI port where you plugged in your PlayStation cable and press Enter. The PlayStation screen should appear.
If you are not sure which HDMI port you used, try each one in order. Most TVs show the port number on screen when you switch inputs. If you have tried all the HDMI ports and still see no picture, unplug the HDMI cable from both the PlayStation and the TV, wait ten seconds, and plug it back in firmly. Then try switching inputs again.
A loose cable is the second most common cause of a black screen. Push the HDMI connector into both the PlayStation and the TV until you feel it click into place. The connector should not wiggle or move easily by hand.
Connecting to an older TV without HDMI ports
If your TV has no HDMI ports, you will need an adapter cable. PlayStation 4 and 5 do not come with adapter cables in the box, so you will need to buy one separately. The most common adapter is an HDMI-to-composite cable (also called an RCA cable), which costs between $10 and $20. This cable has an HDMI connector on one end and three colored plugs (red, white, and yellow) on the other.
Plug the HDMI end into your PlayStation, then plug the three colored connectors into the matching colored ports on the back of your TV. The yellow plug carries the picture, and the red and white plugs carry sound. Switch your TV to the Video input (not Cable or Antenna), and the PlayStation screen should appear. Picture quality will be lower than HDMI, but the console will work.
Adjusting picture settings after you connect
Once your PlayStation is connected and showing on your TV, you do not need to adjust anything for the console to work. Your PlayStation will automatically detect your TV's resolution and adjust the picture to match. On a 4K TV, a PS5 will output in 4K. On a standard 1080p TV, both PS4 and PS5 will output in 1080p.
If the picture looks stretched, blurry, or off-center, the problem is usually a TV setting, not the PlayStation. On your TV remote, look for a button labeled Picture, Display, or Aspect Ratio. Check that the setting is not zoomed in or stretched. Most TVs have a "Fit to Screen" or "Just Scan" option that works best with gaming consoles.
Connecting multiple devices to the same TV
If you have a cable box, streaming device, or game console already plugged into your TV, you can plug your PlayStation into a different HDMI port. Most TVs have two to four HDMI ports, and you can use all of them at once. When you want to play PlayStation, switch your TV input to the port where the PlayStation is plugged in. When you want to watch cable or a streaming service, switch back to that device's port.
You do not need to unplug anything. Just use your TV remote to switch between inputs. If your TV has only one HDMI port and it is already in use, you can buy an HDMI splitter (a small box that lets you plug multiple cables into one port), but this is rarely necessary since most modern TVs have at least two HDMI ports.
Frequently Asked Questions
Do I need a special HDMI cable for PlayStation?
No. Any standard HDMI cable works with PlayStation 4 and 5. You do not need to buy an expensive gaming cable or a cable labeled for 4K — a basic HDMI cable costs $5 to $10 and will work perfectly. The only difference between cheap and expensive HDMI cables is the build quality and length.
Can I use the same HDMI port for my PlayStation and another device?
Not at the same time, but you can unplug one device and plug in another whenever you want. If you want to avoid unplugging cables, use different HDMI ports for each device. Most TVs have at least two ports, so you can keep your PlayStation plugged in permanently and switch inputs when you want to use it.
Why does my TV say "HDCP error" or "HDCP unsupported"?
HDCP is a copy-protection system that some older TVs do not support. If you see this error, your TV cannot display PlayStation content over HDMI. You will need to use an HDMI-to-composite adapter cable instead, or connect to a different TV that supports HDCP.
What if my TV has HDMI ports but they do not work?
Try a different HDMI port on the TV first — one port may be broken while others work fine. If no HDMI ports work, the TV itself may have a hardware problem. Test the TV with another device (like a streaming stick or cable box) to confirm. If other devices also do not work on HDMI, the TV will need repair or replacement.
Can I connect my PlayStation wirelessly to my TV?
No. PlayStation 4 and 5 require an HDMI cable to display on a TV. There is no wireless video option built into either console. You must use an HDMI cable plugged directly into both the console and the TV.