Connect a PS5 Controller Using the USB Cable

The fastest way to connect a new PS5 controller is with the USB-C cable that comes in the box. Plug one end into the controller and the other into any USB port on the front or back of your PS5 console. The controller will begin charging when ready, and the console will recognize it within seconds.

Once the controller is connected by cable, you can use it right away — you do not have to wait for it to charge fully. The pairing happens automatically. If you see the controller light up and the console responds to button presses, the connection is complete.

Key Takeaways

  • A wired USB-C connection pairs a PS5 controller when ready and requires no setup steps beyond plugging in the cable.
  • Wireless pairing through Bluetooth works after you hold the Create and PS buttons together for three seconds until the light flashes.
  • A controller that will not pair may need a firmware update, which you can start from the Settings menu without a working controller.
  • You can connect up to four controllers to one PS5 console at the same time for local multiplayer.
  • If a controller pairs to another device, you must unpair it there before it will connect to your PS5.

Pair a PS5 Controller Wirelessly Using Bluetooth

To connect a controller without a cable, hold down the Create button and the PS button at the same time for about three seconds. The light on the back of the controller will flash white, which means it is searching for your console.

On your PS5, go to Settings, then Accessories, then Controllers. The console will scan for nearby controllers. When your controller appears in the list, select it. The light will stop flashing and turn solid once the pairing is complete.

Wireless pairing works from across a room and does not require the USB cable. The controller will stay connected to your PS5 until you manually unpair it or connect it to a different device.

What to Do If Your Controller Will Not Pair

If the controller light does not flash when you hold Create and PS together, or if the console does not see it in the Accessories menu, the controller may need a firmware update. Connect it to the PS5 using the USB cable, then go to Settings > Accessories > Controllers > Update Controller Firmware. The console will check for and install any available updates automatically.

If the controller is already paired to another device — a phone, tablet, or PC — the PS5 will not be able to connect to it. Unpair the controller from that device first. On most phones and tablets, go to Bluetooth settings, find the controller in the list of paired devices, and select "Forget" or "Unpair".

If the controller still will not pair after a firmware update and unpairing from other devices, try a factory reset. Hold the small reset button on the back of the controller (you may need a paperclip or thin tool to press it) for five seconds. Then attempt to pair again using the Create and PS button method.

Connect Multiple Controllers for Local Multiplayer

Your PS5 supports up to four controllers connected at the same time. Each one pairs the same way — either by USB cable or by holding Create and PS together. You can mix wired and wireless controllers on the same console.

Once all four controllers are paired, assign them to player slots in your game. Most games will prompt you to press a button on each controller to confirm which player it belongs to. After that, all four controllers will work together for split-screen or local multiplayer games.

Charge Your PS5 Controller While Playing

The PS5 controller battery lasts roughly 12 hours of play on a full charge. To charge while you play, connect the controller to the console with the USB-C cable. The controller will charge while you hold it, and the cable is long enough to reach across a lap or couch.

You can also charge the controller without the console on by plugging it into any USB power adapter — the kind used for phones and tablets. A full charge from empty takes about two hours. The controller will not overheat or damage the battery if you leave it plugged in after it is fully charged.

Reconnect a Controller That Stopped Working

If a controller that was working suddenly stops responding, try disconnecting and reconnecting it. If it was paired wirelessly, hold Create and PS together again for three seconds to re-pair. If it was connected by cable, unplug it and plug it back in.

If the controller still does not respond, check the battery. Connect it to the PS5 with the USB cable and let it charge for at least 30 minutes. A completely drained battery can take time to wake up. Once it has some charge, try using it again.

Frequently Asked Questions

Can I use a PS4 controller on my PS5?

No. PS5 controllers use a different connection standard and will not pair with the PS5 console. You must use a PS5 controller. PS5 controllers do work on a PS4, but not the other way around.

Why does my controller keep disconnecting?

Wireless interference from other devices, a low battery, or a controller that needs a firmware update can cause disconnections. Charge the controller fully, move away from other wireless devices, and check for firmware updates in Settings > Accessories > Controllers. If disconnections continue, try using the USB cable instead.

How do I know if my controller is charging?

When you plug in the USB cable, the light on the back of the controller will glow orange or amber. Once fully charged, the light turns off. You can also check the battery level in Settings > Accessories > Controllers to see the exact percentage.

Can I pair a PS5 controller to my phone or computer?

Yes. Hold Create and PS together until the light flashes, then go to your phone or computer's Bluetooth settings and select the controller from the list. It will pair like any other Bluetooth device. However, once paired to another device, it will not connect to your PS5 until you unpair it from that device first.

What if I lost the USB cable that came with my controller?

Any USB-C cable will work — the same type used for many phones and tablets. You do not need the original cable. You can also pair wirelessly without a cable at all by using the Create and PS button method.