Connect Your Controller in Three Steps

To pair a PlayStation controller, you need to put the controller into pairing mode, then search for it on your device. The exact steps depend on whether you are connecting to a PlayStation console, a PC, or a Mac — but the process takes less than two minutes on any of them. Most controllers pair on the first try if you follow the order: power on the device first, then set up pairing mode on the controller, then confirm the connection.

The two most common PlayStation controllers are the DualShock 4 (the older model with a touchpad) and the DualSense (the newer model with haptic feedback and adaptive triggers). Both pair the same way, though some older games only work with DualShock 4. If you are pairing a controller for the first time, have a USB cable nearby — you may need it if wireless pairing stalls.

Key Takeaways

  • Turn on your PlayStation console or computer before you try to pair the controller, so the device is ready to detect it.
  • Hold the PlayStation button and the Share button together for three seconds to enter pairing mode; the light on the controller will flash white.
  • On a PlayStation 5, go to Settings > Bluetooth Accessories and wait for your controller to appear in the list, then select it.
  • If wireless pairing fails, plug the controller into the console or computer with a USB cable and try again — this often fixes connection problems.
  • You can pair up to four controllers to one console at the same time, and each one will work independently.

Pairing to a PlayStation 5

Start by turning on your PlayStation 5 and making sure you are on the home screen. Pick up your DualSense controller and hold down the PlayStation button (the large button in the center) and the Create button (to the left of the touchpad) at the same time for about three seconds. You will see the light bar on the back of the controller start to flash white — this means pairing mode is active.

While the light is flashing, go to Settings on your PS5 home screen. Select Bluetooth Accessories, and your controller should appear in the list within a few seconds. Highlight your controller and press X to confirm the pairing. The light will stop flashing and turn solid white, which means the connection is complete. Your controller is now ready to use.

If the controller does not appear in the Bluetooth Accessories list after 30 seconds, try again. Turn off the controller by holding the PlayStation button for 10 seconds, then repeat the pairing steps. If it still does not work, plug the controller into the PS5 with a USB-C cable for 30 seconds, then try wireless pairing again.

Pairing to a PlayStation 4

Turn on your PlayStation 4 and navigate to Settings from the home screen. Make sure the controller is fully charged or plugged in with a USB cable. Hold the PlayStation button and the Share button (to the left of the touchpad) together for three seconds until the light bar on the back starts to flash white.

Go back to Settings and select Devices, then Bluetooth Devices. Your controller should appear in the list. Select it to complete the pairing. The light bar will turn blue and stay solid, which means your controller is connected. You can now unplug the USB cable if you used one.

On a PS4, you can also pair a controller by plugging it directly into the console with a USB cable and pressing the PS button. The console will recognize it automatically. After that, you can use it wirelessly.

Pairing to a Windows PC

On a Windows computer, put your controller into pairing mode first. Hold the PlayStation button and the Create button together for three seconds until the light flashes white. Then go to your Windows Settings and select Bluetooth & Devices (or Bluetooth & other devices on older Windows versions).

Click Add Device and choose Bluetooth. Your controller should appear in the list within 10 seconds. Click on it to pair. Windows will confirm the connection, and the light on the controller will turn solid. You can now use it with any game that supports PlayStation controllers.

If your PC does not have Bluetooth, you can plug the controller in with a USB cable instead. Windows will install the driver automatically, and you can use the controller wired or switch to wireless once it is recognized.

Pairing to a Mac

Put your controller into pairing mode by holding the PlayStation button and the Create button for three seconds until the light flashes white. On your Mac, go to System Settings and select Bluetooth. Make sure Bluetooth is turned on.

Your controller should appear in the list of available devices. Click Pair next to your controller. The Mac will confirm the connection, and the light will turn solid. Your controller is now ready to use with compatible games on macOS.

If pairing does not work, try plugging the controller into your Mac with a USB-C cable. Some Macs require the controller to be wired the first time before it will recognize it wirelessly.

What to Do If Pairing Fails

The most common reason pairing fails is that the device (console or computer) is not in Bluetooth discovery mode or is too far away. Make sure you are within 10 feet of the device and that no other wireless devices are interfering. Try turning off other Bluetooth devices nearby, like a phone or headset.

If the controller still will not pair, try a hard reset. Hold the PlayStation button for 10 seconds until the controller powers off completely. Wait 10 seconds, then turn it back on and try pairing again. If that does not work, plug the controller into the device with a USB cable for at least one minute, then try wireless pairing.

On rare occasions, the controller's Bluetooth chip may need to be reset. On a DualSense, there is a small reset button on the back near the L2 button. Use a paperclip or small pin to press and hold it for five seconds, then try pairing again. This erases all previous pairings and returns the controller to factory settings.

Pairing Multiple Controllers

You can pair up to four controllers to a single PlayStation console at the same time. Each controller pairs the same way — put it into pairing mode, then confirm it on the console. The first controller you pair becomes Player 1, the second becomes Player 2, and so on. You can use all four controllers in multiplayer games without any extra setup.

On a PC or Mac, you can pair multiple controllers the same way. Go through the pairing process for each one separately. Most games will recognize all connected controllers automatically.

Frequently Asked Questions

Why is my controller flashing white but not connecting?

The flashing white light means pairing mode is active, but the device is not finding it. Make sure Bluetooth is turned on in your device settings, you are within 10 feet of the console or computer, and no other devices are trying to pair at the same time. Try moving closer and waiting 30 seconds. If it still does not work, plug the controller in with a USB cable and try again.

Can I use a DualShock 4 on a PlayStation 5?

Yes, but only for PS4 games. The DualShock 4 does not work with PS5 games because they use features specific to the DualSense controller. You can pair a DualShock 4 the same way — hold the PlayStation and Share buttons for three seconds, then select it in Bluetooth Accessories.

What if my controller is not charging?

Try a different USB cable first, as the cable may be damaged. Plug the controller directly into the console or computer and wait 10 minutes. If it still does not charge, the battery may need replacement. On a DualSense, you can buy a replacement battery online, but on a DualShock 4, the battery is harder to access and may require professional service.

Can I pair a controller to two devices at once?

No. A controller can only be connected to one device at a time. If you want to switch it to a different console or computer, you need to disconnect it from the first device, then pair it to the second one. Disconnecting is automatic when you turn off the controller or move out of Bluetooth range.

Do I need to pair the controller every time I turn on my console?

No. Once you pair a controller, it stays paired to that console or computer. The next time you turn on the device and press any button on the controller, it will connect automatically. You only need to pair it again if you reset the controller or pair it to a different device.