Put your controller in pairing mode by holding the PlayStation button and Share button together for three seconds

To pair a PlayStation controller to your console or another device, you need to put the controller into pairing mode first. This tells the controller to look for a device to connect to instead of trying to reconnect to the last device it was paired with. The process is the same whether you're using a DualShock 4 (PS4) or DualSense (PS5) controller.

Hold down the PlayStation button (the large button in the center with the PlayStation logo) and the Share button (to the left of the touchpad) at the same time. Keep both buttons pressed for about three seconds. The light bar on the back of the controller will begin flashing white, which signals that pairing mode is active. Once you see this flashing light, you can release the buttons.

The controller will stay in pairing mode for about three minutes. During this window, turn on Bluetooth on the device you want to pair it with and search for available controllers. The controller should appear in the list of devices ready to connect.

Key Takeaways

  • Hold the PlayStation button and Share button together for three seconds to enter pairing mode.
  • A flashing white light on the back of the controller confirms pairing mode is active.
  • You have about three minutes to complete the pairing before the controller times out and returns to normal mode.
  • Make sure Bluetooth is turned on and set to discovery mode on the device you're pairing with before you start.
  • If pairing fails, try putting the controller back into pairing mode and search again on your device.

What the light bar tells you during pairing

The light bar on the back of your controller changes color and pattern to show you what's happening. When you first press the buttons to enter pairing mode, the light will flash white in a steady rhythm. This white flashing means the controller is ready and waiting for a device to find it.

Once a device connects successfully, the light will stop flashing and settle into a solid color—usually white, blue, or another color depending on which player slot the controller is assigned to. If the light goes dark or stops flashing before you've completed pairing, the controller has timed out and returned to normal mode. You'll need to hold the buttons again to re-enter pairing mode.

Pairing to a PlayStation 5 console

If you're pairing a new DualSense controller to a PS5, put the controller into pairing mode using the button combination above. On the PS5 itself, go to Settings, then Accessories, then Controllers. Select Pair Controller and the console will search for controllers in pairing mode. Your controller should appear in the list within a few seconds.

Select the controller from the list and the PS5 will complete the pairing automatically. The light bar will turn solid, and you're ready to use it. If the controller doesn't appear, make sure it's still in pairing mode (the light should still be flashing white) and try the search again.

Pairing to a PlayStation 4 console

For a DualShock 4 controller on PS4, the process is similar. Put the controller into pairing mode, then on your PS4 go to Settings, Devices, Bluetooth Devices. The PS4 will scan for controllers. Your controller should show up in the list—select it to pair.

The PS4 will assign the controller to a player slot and the light bar will turn solid. You may be asked to press the PlayStation button to confirm the pairing is complete. Once that's done, the controller is ready to use with your console.

Pairing to a PC or mobile device

You can also pair PlayStation controllers to a computer or phone. Put the controller into pairing mode first. On your PC or mobile device, open the Bluetooth settings and look for available devices. The controller will appear as "Wireless Controller" (PS4) or "PS5 Controller" (PS5) in the list.

Tap or click the controller name to pair. Depending on your device, you may see a confirmation prompt or a PIN code to enter—most modern devices pair without needing a code. Once connected, the light bar will turn solid and the controller will work with games and apps that support it.

What to do if pairing mode won't set up

If the light bar doesn't flash white when you hold the buttons, the controller's battery may be too low. Plug the controller into a USB cable connected to a power source and let it charge for at least 30 minutes. Try the pairing button combination again once it has some charge.

If the light still doesn't flash, make sure you're holding both the PlayStation button and the Share button at the same time. The Share button is small and sits to the left of the touchpad on the front of the controller. Press them firmly and hold for the full three seconds. If the controller still won't enter pairing mode after charging and trying again, the controller may have a hardware issue and may need to be replaced.

Pairing multiple controllers at once

You can pair more than one controller to the same console or device. Put the first controller into pairing mode, complete the pairing process, and then repeat the steps with the second controller. Each controller will be assigned its own player number or slot. The light bar color may change to show which player slot each controller is assigned to.

If you're pairing controllers to a PS5, you can pair up to four controllers at once, though you'll need to do them one at a time through the pairing menu. On PC or mobile, the number of controllers you can pair depends on the device and the game or app you're using.

Frequently Asked Questions

How long does pairing mode stay active?

Pairing mode stays active for about three minutes. If you don't complete the pairing within that time, the controller will exit pairing mode automatically and the light bar will stop flashing. You'll need to hold the PlayStation and Share buttons again to re-enter pairing mode.

Can I pair a controller while it's charging?

Yes, you can pair a controller while it's plugged in and charging. In fact, if your controller's battery is very low, charging it first may be necessary before pairing mode will work at all. The controller can be used while charging once it's paired.

What if my controller pairs but then disconnects right away?

If the controller connects and then when ready disconnects, the battery may be too low to maintain the connection. Charge the controller for at least an hour and try pairing again. If it keeps disconnecting, try unpairing it from the device and pairing it again from scratch.

Do I need to put the controller in pairing mode every time I use it?

No. Once a controller is paired to a device, it will automatically reconnect the next time you turn it on. You only need to use pairing mode when connecting to a new device or if the controller fails to reconnect on its own.

Can I pair a PS4 controller to a PS5?

A DualShock 4 (PS4 controller) can be used with some PS5 games, but not all. You'll need to pair it using the same pairing mode process. However, Sony recommends using a DualSense controller with PS5 for the best experience, as some games require the DualSense's special features.