The fastest way to reconnect a PS4 controller

If your PlayStation 4 controller has stopped responding, the quickest fix is to plug it into your console with a USB cable, wait for the light bar to stop flashing, then unplug it. The controller will now pair wirelessly again. This works whether the controller lost connection during play, drained its battery, or you switched it to another device.

If plugging in does not restore the connection, hold the small reset button on the back of the controller for three seconds using a straightened paperclip or SIM ejector tool, then plug it in again. This clears the controller's memory and forces it to pair fresh with your console.

Key Takeaways

  • Plug the controller into your PS4 with a USB cable and wait for the light bar to stop flashing, which signals the pairing is complete.
  • If the controller still will not connect, press and hold the reset button on the back for three seconds, then plug it in again.
  • Make sure your PS4 is powered on or in rest mode, not completely shut down, or the controller cannot pair.
  • If the light bar does not light up at all when plugged in, the controller's battery may be completely dead and needs 30 minutes of charging before trying again.

Reconnecting by USB cable (the standard method)

Connect the controller to your PS4 using a micro-USB cable — the same type that charges most phones and Android devices. Plug the cable into the port on the back of the controller, below the light bar, and plug the other end into any USB port on the front of your console.

Watch the light bar on top of the controller. It will flash white or blue while pairing. Once it stops flashing and stays solid, the connection is established. This usually takes 10 to 20 seconds. You can now unplug the cable and use the controller wirelessly.

If the light bar does not light up at all, the controller's battery is completely empty. Leave it plugged in for at least 30 minutes before trying to use it. A dead controller will not pair until it has some charge.

Using the reset button when USB pairing fails

The reset button is a small hole on the back of the controller, just below the L2 and R2 buttons. Use a straightened paperclip, a SIM ejector tool, or the tip of a ballpoint pen to press and hold it for exactly three seconds. You will not feel it click — just hold steady pressure.

After releasing the reset button, when ready plug the controller into your PS4 with a USB cable. The light bar will flash rapidly, then settle into a solid color. This reset clears any pairing data stored on the controller and forces it to pair as if it were brand new.

Do not hold the reset button longer than three seconds. Holding it for 10 or more seconds will put the controller into pairing mode, which is different and may not reconnect to your console.

Making sure your PS4 is ready to pair

Your console must be powered on or in rest mode for the controller to pair. If your PS4 is completely shut down, the controller will not connect even if you plug it in. Turn on the console first, either by pressing the power button on the front or by using another controller that is already paired.

Rest mode is the low-power state where the console appears off but is still listening for input. You can put your PS4 into rest mode by pressing the power button once and waiting a few seconds. The light on the front will turn orange. This is fine for pairing a controller.

Troubleshooting when the light bar stays off

If you plug in the controller and the light bar does not light up at all, the battery is completely drained. Charge it for at least 30 minutes before trying to pair again. You can charge it while plugged into the PS4, a computer, a phone charger, or any device with a USB port.

If the light bar still does not turn on after 30 minutes of charging, the controller's battery or internal circuitry may be damaged. Try a different USB cable first — sometimes the cable is the problem, not the controller. If a different cable does not work, the controller itself may need replacement.

Reconnecting after switching to another device

If you used your PS4 controller on a phone, computer, or another console, it will not automatically switch back to your PS4. You must unpair it from the other device first, then reconnect it to your PS4 using the USB cable method described above.

To unpair from a phone or computer, go to the Bluetooth settings, find the controller in the list of paired devices, and select "Forget" or "Remove". Then plug the controller into your PS4 with a USB cable. The console will pair it wirelessly and it will stay connected to the PS4 until you unpair it again.

What to do if the controller pairs but does not respond

If the light bar is solid and the controller is paired but the buttons do not work, the problem is usually a software issue on the console, not the controller itself. Restart your PS4 completely: hold the power button for 10 seconds until the console shuts down, wait 30 seconds, then turn it back on.

If restarting does not work, try pairing a different controller to see if that one responds. If a second controller works, the first one may have a stuck button or damaged circuitry. If no controller responds, the problem is with your PS4, not the controllers.

Frequently Asked Questions

Can I pair a PS4 controller without a USB cable?

No. If your controller has never been paired to your console before, or if it has lost its pairing, you must use a USB cable to reconnect it. Wireless pairing only works after the initial USB connection is made. Once paired, the controller will reconnect wirelessly the next time you turn on your PS4.

How long does it take to charge a completely dead PS4 controller?

A completely dead controller usually takes 30 minutes to 2 hours to charge enough to pair and use. Plugging it into your PS4 charges it slower than plugging it into a phone charger or computer. If you are in a hurry, use a phone charger with a USB port for faster charging.

Why does my controller keep disconnecting during play?

Frequent disconnections during use usually mean the battery is low. Plug the controller in to charge it fully. If disconnections continue after a full charge, try the reset button method. If the problem persists with a fully charged controller, the wireless receiver inside your PS4 or the controller itself may be failing.

Will resetting the controller erase my saved games or settings?

No. Resetting the controller only clears its pairing data. Your saved games, console settings, and user accounts are stored on your PS4 and will not be affected. The reset only affects how the controller connects to the console.

What if I lost the USB cable that came with my PS4?

Any micro-USB cable will work — you do not need the original cable. These cables are standard and inexpensive. Check your phone charger, computer, or any other device that uses micro-USB. If you do not have one, you can buy a replacement for a few dollars at any electronics store or online.