What resetting your PS4 controller actually does
A reset clears the controller's internal memory and severs its wireless connection to your console. This solves most problems: buttons that stick or don't register, the controller not pairing, lag, or drift in the analog sticks. The reset itself takes about 30 seconds and requires only a small tool — a paperclip or the ejector pin from a SIM card tray works fine.
Resetting does not erase any saved games, profiles, or console settings. It only resets the controller itself. After the reset, you will need to pair it to your PS4 again using a USB cable, which takes another minute or two.
Key Takeaways
- A reset clears the controller's memory and wireless connection, fixing pairing problems, button lag, and stick drift without affecting your games or console settings.
- You will need a small pointed tool like a paperclip to press the reset button, which is a recessed hole on the back of the controller near the L2 shoulder button.
- After resetting, you must reconnect the controller to your PS4 using a USB cable before you can use it wirelessly again.
- If the controller still does not work after a reset, the hardware itself may be damaged and the controller may need replacement.
How to locate and press the reset button
Turn the controller over so you are looking at the back. Near the top, between the L2 and R2 shoulder buttons, you will see a small recessed hole. This is the reset button. It is deliberately hard to reach so you do not press it by accident.
Straighten a paperclip or use a SIM ejector tool, and push it straight into the hole. You should feel a small click. Hold it for about five seconds, then release. You do not need to press hard — a gentle, steady push is enough. The controller will not vibrate or light up to confirm the reset; it straightforward happens.
Reconnecting the controller after reset
Plug a USB cable into the controller's charging port (the micro-USB port on the top edge) and connect the other end to your PS4 console. The controller will light up and the PS4 will recognize it as a new device.
Press the PlayStation button in the center of the controller. Your console will ask you to assign the controller to a user profile. Select the profile you normally use, and the pairing is complete. You can now unplug the USB cable and use the controller wirelessly.
When a reset fixes common problems
Button lag or unresponsive buttons often clear up after a reset because the controller's memory of button presses is wiped. If a button still does not respond after reset and reconnection, the button itself may be worn out and the controller may need replacement.
Stick drift — where the analog stick registers movement even when you are not touching it — sometimes improves after a reset, though not always. If drift returns within a few days, the stick hardware is likely failing. Drift is one of the most common hardware failures in PS4 controllers.
Pairing problems are almost always solved by a reset. If your controller will not connect to the PS4 even after reset and USB reconnection, try resetting the PS4 itself: go to Settings > System > Reset PS4 > Reset (not Restore Default Settings). This is a last resort and takes longer, but it clears the console's memory of all paired controllers.
What to do if the controller still does not work
If the controller still has problems after reset and reconnection, the issue is likely hardware damage rather than a software glitch. Test the controller on another PS4 if you have access to one — if it works on a different console, the problem is with your PS4, not the controller. If it fails on every PS4, the controller itself is damaged.
Common hardware failures include stick drift, unresponsive buttons, a broken charging port, or a failed wireless module. None of these can be fixed by resetting. You can replace the analog sticks yourself if you are comfortable opening the controller — replacement stick modules cost $10 to $20 and are available online — but other failures usually require a new controller.
Preventing controller problems before they start
Store your controller in a cool, dry place when not in use. Avoid dropping it or explore pressure to the analog sticks. If you notice stick drift beginning, reduce how hard you push the stick and avoid games that require rapid stick movement until you can replace it.
Keep the charging port clean. Lint and dust can prevent the cable from making good contact. If the controller charges slowly or inconsistently, gently clean the port with a dry cotton swab before assuming the port is broken.
Frequently Asked Questions
Will resetting the controller erase my saved games?
No. A reset only affects the controller itself, not your console or any data stored on it. Your saved games, profiles, and all console settings remain unchanged.
Do I have to use a USB cable to reconnect after reset?
Yes, at least for the first reconnection. After you pair it via USB, the controller will remember your PS4 and connect wirelessly in the future. You only need the cable for the initial pairing after a reset.
How often should I reset my controller?
Only reset when you have a specific problem — pairing issues, lag, or drift. Resetting is not maintenance and does not prevent problems. Reset only when something stops working correctly.
Can I reset the controller while it is connected to the PS4?
Yes, the controller does not need to be powered off or disconnected. You can reset it at any time. After the reset, it will disconnect from the PS4, and you will need to reconnect it with a USB cable.
What if I do not have a paperclip or SIM tool?
Any small, pointed object that fits the hole will work — a straightened paper clip, a pushpin, a toothpick, or even a small nail. The goal is straightforward to reach the button inside the recessed hole. Avoid anything sharp enough to damage the plastic.