The Two Ways to Reset a PS5 Controller
A PlayStation 5 controller can be reset in two ways: a soft reset that clears temporary problems without erasing your settings, and a factory reset that returns it to brand-new condition. Most of the time, a soft reset solves connection issues, stick drift, or unresponsive buttons. A factory reset is only necessary if the controller won't pair with your console or if you're selling or giving it away.
The soft reset takes 30 seconds and requires nothing but the controller itself. The factory reset requires a small tool—a straightened paperclip or a SIM card ejector—and takes about the same time. Both methods are safe and won't damage the controller.
Key Takeaways
- A soft reset clears temporary glitches by holding the PS button and Options button together for three seconds, and fixes most connection and responsiveness problems.
- A factory reset uses the reset button on the back of the controller, accessed through a small hole, and returns the controller to its original pairing state.
- Soft reset your controller first—it solves the majority of problems and takes less than a minute.
- After either reset, you may need to pair the controller to your PS5 again by holding the PS button and Share button together.
- If the controller still does not respond after a factory reset, the hardware may be damaged and the controller may need replacement.
How to Soft Reset Your PS5 Controller
A soft reset clears the controller's temporary memory without changing any settings. This fixes most problems: the controller won't connect, buttons feel unresponsive, or the stick drifts in one direction.
Hold down the PS button (the center button with the PlayStation symbol) and the Options button (the three horizontal lines on the right side) at the same time. Keep both pressed for three seconds, then release. The controller will vibrate once to confirm the reset is complete.
After the soft reset, test the controller by pressing a few buttons. If it still does not respond, try pairing it again: hold the PS button and the Share button (the square icon on the left side) together for three seconds until the light on the controller flashes. Then select the controller from your PS5's settings menu under Accessories > Controllers > Wireless Controller Settings.
How to Factory Reset Your PS5 Controller
A factory reset erases all pairing information and returns the controller to the state it was in before you first used it. Use this method if the soft reset did not work, or if you are preparing the controller for someone else to use.
Locate the small circular hole on the back of the controller, near the bottom. This hole contains the reset button. Use a straightened paperclip, a SIM card ejector, or a similar thin tool to press the button inside the hole. Press and hold for three to five seconds, then release. The light on the controller will flash briefly to confirm the reset.
After a factory reset, the controller is no longer paired to your PS5. You will need to pair it again: hold the PS button and the Share button together for three seconds until the light flashes. Go to your PS5 settings, select Accessories > Controllers > Wireless Controller Settings, and follow the on-screen prompts to reconnect the controller.
When to Soft Reset vs. Factory Reset
Start with a soft reset every time. It takes 30 seconds, solves most problems, and does not erase any settings. Use it when the controller will not connect, buttons are unresponsive, or the stick drifts.
Move to a factory reset only if the soft reset did not work, or if you need to completely unpair the controller from your console. A factory reset is also the right choice if you are giving the controller to someone else, because it removes all pairing data and returns it to a clean state.
If the controller still does not work after a factory reset, the problem is likely hardware damage—a broken button, a damaged stick, or a failed circuit. In that case, the controller will need to be replaced.
Pairing the Controller After a Reset
After either a soft reset or a factory reset, your controller may need to be paired to your PS5 again. The pairing process is the same for both.
Hold the PS button and the Share button together for three seconds. The light on the controller will flash, indicating it is in pairing mode. On your PS5, go to Settings > Accessories > Controllers > Wireless Controller Settings. Your console will search for the controller and display it on screen. Select it to complete the pairing.
Once paired, the controller will connect automatically the next time you turn on your PS5. If it does not connect automatically, hold the PS button for one second to wake the controller, and it should connect within a few seconds.
Troubleshooting After a Reset
If your controller still does not work after a soft reset and factory reset, check these common causes before assuming the hardware is damaged.
The controller will not pair: Make sure your PS5 is turned on and not in rest mode. Restart your console by holding the power button for 10 seconds, then try pairing again. If the controller still will not pair, try a second factory reset—sometimes the first one does not complete fully.
The controller pairs but buttons do not respond: The buttons may be stuck or dirty. Gently press each button several times to clear any debris. If a specific button is still unresponsive, that button may be damaged and the controller may need replacement.
The stick drifts even after a soft reset: Stick drift is usually a hardware problem, not a software one. A soft reset sometimes helps temporarily, but if the drift returns, the stick mechanism is likely worn and the controller will need replacement.
Frequently Asked Questions
Will resetting my controller erase my game saves?
No. Resetting the controller only affects the controller itself, not your console or your game data. Your saves are stored on your PS5 or in the cloud and will not be touched by any controller reset.
Do I need to reset both controllers if only one is broken?
No. You only need to reset the controller that is having problems. Your other controller will continue to work normally and does not need to be reset.
How do I know if my controller needs a factory reset instead of a soft reset?
Try a soft reset first—it solves about 90 percent of problems. Only move to a factory reset if the soft reset did not work, or if you need to completely unpair the controller from your console.
Can I reset my controller if it will not turn on?
If the controller will not turn on, it may be out of battery. Plug it into your PS5 with a USB-C cable and charge it for at least 30 minutes, then try the soft reset. If it still will not turn on after charging, try a factory reset while it is plugged in.
What should I do if the reset button hole is too small for my tool?
A straightened paperclip or a SIM card ejector should fit the hole. If neither works, the hole may be blocked by dust or debris. Try gently blowing into the hole or using a toothpick to clear it. Do not force a tool into the hole, as you may damage the button inside.