Getting a PlayStation 1 ROM to work in RetroArch
RetroArch is an emulator that can play PlayStation 1 games from ROM files, but it requires three separate pieces: the RetroArch program itself, a PlayStation 1 emulation core (the actual player), and your ROM file. You install RetroArch first, then add the core from within the program, then point it to your ROM folder. The whole process takes about 15 minutes if you already have your ROM files.
The most common core for PlayStation 1 games is called Beetle PSX, which handles the majority of games well. A second option called Beetle PSX HW exists for users with more powerful computers who want higher graphics settings, but Beetle PSX works on older machines and is the safer choice for most people.
Key Takeaways
- RetroArch itself is free and runs on Windows, Mac, and Linux, but you need to read it from the official RetroArch website, not from app stores.
- The Beetle PSX core is the standard PlayStation 1 emulator within RetroArch and must be downloaded separately after you install the main program.
- PlayStation 1 ROMs are typically .bin and .cue files that must stay together in the same folder for the game to load.
- You point RetroArch to your ROM folder through the Settings menu, then load games from the file browser inside the program.
read and install RetroArch on your computer
Go to retroarch.com and click the read button for your operating system. Windows users should read the installer version, not the portable version, unless you want to run RetroArch from a USB drive. Mac users will get a .dmg file that you drag into Applications. Linux users will find instructions specific to their distribution on the same page.
Run the installer and choose your installation folder. The default location works fine. Once installed, open RetroArch and you will see a menu with several options including "Online Updater" and "Settings". Do not worry if it looks bare — you have not added any cores yet.
read the Beetle PSX core from within RetroArch
Open RetroArch and go to Online Updater, then select "Core Downloader". Scroll down until you find "Beetle PSX" in the list. Click it and RetroArch will read and install it automatically. This usually takes less than a minute on a normal internet connection.
Once the read finishes, go back to the main menu. You now have a working PlayStation 1 emulator. The next step is telling RetroArch where your ROM files are stored.
Set up your ROM folder and organize your files
Create a folder on your computer called "PS1 ROMs" or any name you prefer. Move all your PlayStation 1 ROM files into this folder. PlayStation 1 games come as two files: a .bin file (the actual game data) and a .cue file (a text file that tells the emulator how to read the .bin file). Both files must be in the same folder and have matching names — for example, "Final Fantasy VII.bin" and "Final Fantasy VII.cue".
If you have only a .bin file without a .cue file, you can create a basic .cue file yourself. Open a text editor like Notepad, type the following lines, and save it with the same name as your .bin file but with a .cue extension:
FILE "gamename.bin" BINARY TRACK 01 MODE1/2352 INDEX 01 00:00:00
Replace "gamename.bin" with your actual filename. This basic .cue file works for most games.
Point RetroArch to your ROM folder
Open RetroArch and go to Settings, then File Browser. Select "Browse for Folder" and navigate to your PS1 ROMs folder. RetroArch will remember this location. You can also set a default core for PlayStation 1 games here: go to Settings, then Core Associations, find "PlayStation 1", and select Beetle PSX from the dropdown.
If you want to organize your games into subfolders by letter or genre, RetroArch will still find them as long as they are somewhere inside your main ROM folder.
Load and play a game
From the RetroArch main menu, select "Load Content". Navigate to your PS1 ROMs folder and select the .cue file of the game you want to play. RetroArch will load the game using the Beetle PSX core. The first time you load a game, it may take 10 to 20 seconds to initialize.
Once the game starts, you can pause it by pressing the Select button on your controller (or the key you have mapped for pause). Go to Quick Menu to adjust graphics settings, save your progress, or load a previous save. Your controller should work automatically if it is a standard USB gamepad; if it does not, go to Settings and configure your input device.
Troubleshooting common problems
If a game will not load, the most common cause is a missing or mismatched .cue file. Make sure the .cue and .bin files have exactly the same name and are in the same folder. If you created a .cue file yourself, double-check the filename inside the .cue file matches your .bin file exactly, including capitalization and spaces.
If the game loads but runs slowly, you may need to adjust graphics settings. Go to Settings, then Video, and try turning off "Threaded Video" or lowering the resolution. Beetle PSX HW offers more graphics options but requires a faster computer. If you are using an older machine, stick with standard Beetle PSX and keep graphics settings at their defaults.
If your controller does not work, go to Settings, then Input, then Input User 1 Port 1, and manually map your controller buttons. Most standard USB gamepads work without this step, but some older or wireless controllers need manual setup.
Frequently Asked Questions
Can I use a PS1 memory card save from the original console?
No. RetroArch creates its own save files that are not compatible with original PlayStation 1 hardware. You can save your progress in RetroArch, but you cannot transfer that save to a real console or vice versa.
What if I have a .iso file instead of .bin and .cue?
Beetle PSX can play .iso files directly. You do not need to convert them. Just point RetroArch to your ROM folder and select the .iso file to load it.
Do I need a BIOS file to run PlayStation 1 games?
Beetle PSX works without a BIOS file for most games, but some games run better or more accurately with one. If a game does not work, you can add a BIOS file later. Place it in your RetroArch system folder and go to Settings, then Core Options, to enable it.
Can I use a wireless controller?
Most modern wireless USB controllers work with RetroArch. Older wireless controllers or those with proprietary receivers may not. If your wireless controller does not work, try a wired USB gamepad instead, or manually map the buttons in Input settings.
Why does my game run at the wrong speed?
RetroArch matches the speed to your monitor's refresh rate by default. If your monitor is 60 Hz and the game runs too fast or too slow, go to Settings, then Video, and adjust "Synchronization" or turn on "VSync" to lock the game to your display's refresh rate.