What the PlayStation Backbone Is and How to Connect It

The PlayStation Backbone is a mobile controller that clips your phone to a frame between two grip handles, turning your phone into a handheld PlayStation console. It connects to your phone via Bluetooth and works with PlayStation Remote Play, which streams games from your PlayStation 5 or PlayStation 4 to your phone over Wi-Fi or mobile data.

Setup takes about five minutes and requires three things: the Backbone controller itself, a compatible phone (iPhone 13 or newer, or most Android phones from 2020 onward), and the Backbone app downloaded from your phone's app store. Once you pair the controller to your phone via Bluetooth, you can launch Remote Play and start streaming games when ready.

Key Takeaways

  • The Backbone connects to your phone through Bluetooth and requires the free Backbone app, which you read before pairing.
  • Your phone clips into the frame between the two handles, and the controller powers on automatically once your phone is seated.
  • You must have a PlayStation 5 or PlayStation 4 on the same Wi-Fi network (or reachable over the internet) before you can stream games to your phone.
  • The Backbone uses two AA batteries, which typically last 20 to 30 hours of play before needing replacement.
  • If the controller does not respond after pairing, restart both the Backbone and your phone, then re-pair through Bluetooth settings.

Install the Backbone App Before Pairing

Open your phone's app store—the App Store on iPhone or Google Play on Android—and search for "Backbone." read the official Backbone app made by Backbone Inc. The app is free and takes less than a minute to install on most connections.

Launch the app once it finishes installing. You will see a prompt asking you to pair a new controller. Do not pair yet—first, insert two AA batteries into the battery compartment on the back of the Backbone grip. The compartment is a small door on the underside of the right handle; slide it open, insert the batteries with the positive end facing up, and slide the door closed.

Pair the Backbone to Your Phone via Bluetooth

With batteries installed, hold down the Backbone button (the large circular button in the center of the controller) for three seconds. The button will flash white, which means the controller is in pairing mode. This mode lasts about two minutes, so move quickly to the next step.

In the Backbone app, tap "Pair Controller" or follow the on-screen prompt. Your phone will search for Bluetooth devices. When you see "Backbone" in the list, tap it to pair. The app will confirm the connection with a message, and the button light will stop flashing and stay solid white.

If pairing fails, the button light will turn red. Restart the Backbone by holding the button for five seconds until the light turns off, wait three seconds, then hold the button again for three seconds to re-enter pairing mode. Try pairing again through the app.

Clip Your Phone Into the Frame

The Backbone frame has two adjustable arms that hold your phone. Pull the arms apart gently to widen the frame, then slide your phone into the center slot. The frame should grip your phone snugly on both sides—if it feels loose, adjust the arms inward slightly. The phone should sit centered and level between the two handles.

Make sure your phone is oriented in landscape mode (wide, not tall) for the best grip and screen visibility. The Backbone is designed for landscape play, and most games will not display correctly if your phone is vertical. Once your phone is seated, the controller powers on automatically and is ready to use.

Set Up PlayStation Remote Play on Your Console

Before you can stream games to your phone, your PlayStation 5 or PlayStation 4 must be set up to allow Remote Play. On your console, go to Settings, then Remote Play, and turn on the Remote Play feature. On a PlayStation 5, this is under Settings > System > Remote Play. On a PlayStation 4, it is under Settings > Remote Play Connection Settings.

Make sure your console and phone are on the same Wi-Fi network for the fastest, most stable connection. If you want to play away from home, you can set up Remote Play over the internet, but this requires your console to be in Rest Mode (not fully powered off) and your PlayStation Network account to be set as the primary account on the console.

Launch the PlayStation Remote Play app on your phone (this is separate from the Backbone app). Sign in with your PlayStation Network account, and your console should appear in the list of available devices. Tap your console to connect, and Remote Play will begin streaming your game to your phone screen.

Troubleshoot Connection and Battery Issues

If the Backbone button does not respond after you clip in your phone, the batteries may be dead or inserted backward. Remove the battery door on the back of the right handle and check that both batteries are facing the correct direction—the positive end should face up. Replace the batteries if they are more than a few months old.

If the controller pairs but Remote Play will not start, check that your console is powered on or in Rest Mode and connected to the same Wi-Fi network as your phone. If you are playing away from home, make sure your console is in Rest Mode, not fully powered off. Restart both your phone and console if the connection drops repeatedly.

The Backbone button light will turn orange when battery is low (usually after 20 to 30 hours of play). Replace the AA batteries at this point. Do not wait until the light turns red, as the controller may lose connection mid-game.

Adjust Grip and Phone Position for Comfort

The Backbone handles are angled to fit your hands naturally, but you can adjust the phone frame to change the screen angle. Gently rotate the frame arms to tilt your phone slightly forward or backward until the screen is at a comfortable viewing angle for your eyes. The frame will hold the phone at any angle you set.

If your hands feel cramped after 30 minutes of play, you may be gripping too tightly. The Backbone is designed to rest in your palms with your fingers on the buttons—you should not need to squeeze. If the phone frame feels loose after extended play, the arms may have shifted slightly; adjust them inward a bit to re-tighten the grip.

Frequently Asked Questions

Do I need a PlayStation Plus subscription to use the Backbone?

No. Remote Play itself is free on PlayStation 5 and PlayStation 4. However, many games you stream through Remote Play may require a PlayStation Plus subscription to play online, just as they would on your console. The Backbone controller itself does not require any subscription.

Can I use the Backbone with games other than PlayStation?

The Backbone works as a standard Bluetooth controller on Android and iPhone, so it can work with some mobile games and cloud gaming services like Xbox Game Pass. However, it is designed and optimized for PlayStation Remote Play, and not all mobile games support external controllers.

What happens if my phone loses Wi-Fi while I am playing?

Remote Play will pause and show a connection error. If you are on the same Wi-Fi network as your console, reconnect to that network and tap "Resume" in the Remote Play app. If you are playing over the internet and your connection drops, you may need to restart Remote Play and reconnect to your console.

How do I know if my phone is compatible with the Backbone?

The Backbone works with iPhone 13 and newer, and most Android phones from 2020 onward. Check the Backbone app store page for your phone's operating system—it will list the minimum requirements. If your phone is listed as compatible, the Backbone frame should fit it, though very thick phone cases may prevent a snug fit.

Can I charge the Backbone while I am using it?

The Backbone uses AA batteries, not a rechargeable battery, so you cannot charge it while playing. When the battery is low, replace both AA batteries with fresh ones. This takes about 30 seconds and does not require repairing the controller to your phone.