Press the power button on the console itself

The power button is a small, flat button on the front of the PlayStation 4, to the left of the disc drive. Press it once and hold for a moment — you do not need to hold it for more than a second or two. The console will beep, and a white light will appear on the power button.

The system takes about 30 seconds to fully boot. You will see the PlayStation logo appear on your screen, followed by the home screen where your profile and games are displayed. If nothing happens when you press the button, check that the power cable is plugged firmly into both the back of the console and the wall outlet.

Key Takeaways

  • The power button is a flat button on the front left of the PS4, and a single short press turns the console on.
  • The system takes about 30 seconds to fully boot from power button press to home screen.
  • A white light on the power button and a beep confirm the console is starting up.
  • If the console does not respond, verify the power cable is connected to both the back of the unit and a working wall outlet.
  • You can also turn on the PS4 by pressing the PS button on a connected controller, which wakes the system from rest mode.

Using a controller to turn on the PS4

If your PlayStation 4 is in rest mode — a low-power state where the light pulses slowly — you can wake it by pressing the PS button in the center of any connected controller. The PS button is the large circular button with the PlayStation symbol on it. Press it once, and the console will wake and return to the home screen within a few seconds.

This method works only if the controller is already paired to the console and has a charged battery. If the controller battery is dead, you will need to charge it using the USB cable that came with the PS4, then try again.

Difference between power off and rest mode

The PlayStation 4 has two states: fully powered off and rest mode. When you press the power button once, the console enters rest mode, where it uses very little electricity but stays ready to wake quickly. The light on the power button will pulse slowly in rest mode.

To fully power off the console, hold the power button for about 7 seconds until you hear two beeps and the light goes out. In rest mode, the system can read updates and charge controllers in the background. Full power-off uses almost no electricity but takes longer to start up again.

Troubleshooting if the PS4 will not turn on

If pressing the power button produces no response, first check the power cable. Make sure it is plugged into the back of the console and into a working wall outlet. Try plugging a different device — a lamp or phone charger — into the same outlet to confirm the outlet itself works.

If the outlet works but the PS4 still does not respond, unplug the power cable from the back of the console, wait 30 seconds, and plug it back in. This resets the power supply. Then press the power button again. If the console still does not turn on after these steps, the power supply may be faulty and may need replacement.

What to do if the console beeps but does not display anything

Sometimes the PS4 will power on — you will hear the beep and see the light — but nothing appears on your screen. First, check that your TV or monitor is set to the correct input. Use your TV remote to cycle through inputs until you see the PlayStation home screen, or look for an input button labeled HDMI.

If you have tried all inputs and still see nothing, the HDMI cable connecting the PS4 to your screen may be loose or damaged. Turn off the console, unplug the HDMI cable from both the back of the PS4 and the TV, wait a few seconds, and plug it back in firmly. Then turn the console on again.

Connecting a controller before first startup

When you turn on a brand-new PS4 for the first time, you will need a controller to complete the setup. The console comes with one controller in the box. Plug the controller into the PS4 using the USB cable that came with it, then press the power button on the console. The controller will charge while you set up your system.

Once setup is complete, you can unplug the controller and use it wirelessly. If you have multiple controllers, you can pair additional ones by plugging them in with a USB cable and pressing the PS button on each one while the console is on.

Frequently Asked Questions

Is it bad to leave my PS4 in rest mode all the time?

No. Rest mode is designed for this purpose and uses minimal power. Many players leave their PS4 in rest mode between gaming sessions so updates read automatically and controllers charge overnight. It is more convenient than fully powering off each time.

Why does my PS4 turn on by itself?

This usually happens because a controller with a low battery is pressing a button, or because the console is set to wake from network activity or a scheduled read. Check your controller battery level and look in Settings > Power Saving Settings to see which wake options are enabled. You can disable any you do not want.

Can I turn on my PS4 from my phone?

Not directly from your phone. You can use the PS4 Remote Play app to control the console if it is already on or in rest mode, but you cannot power it on from off using your phone. You will need to press the power button on the console or use a controller.

How long does it take for a PS4 to fully start up?

From a full power-off, the PS4 takes about 45 seconds to 1 minute to reach the home screen. From rest mode, it wakes in about 10 to 15 seconds. The exact time depends on whether the system is installing updates or checking for new content.