The fastest way to power down your controller

Hold the PlayStation button (the button with the PlayStation logo) in the center of your controller for three seconds. A menu will appear on your screen with options including "Turn Off Controller". Select that option and your controller will shut down.

If you do not see the menu, make sure you are holding the button long enough — three full seconds, not a quick tap. The controller will vibrate slightly when the menu appears, so you will feel when you have held it long enough.

Your controller will also turn off on its own if you do not use it for about 15 minutes. This is the default setting on most PlayStation consoles and helps preserve battery life when you step away from the game.

Key Takeaways

  • Hold the PlayStation button in the center of your controller for three seconds to bring up the power menu.
  • Select "Turn Off Controller" from the menu that appears on your screen.
  • Your controller will automatically power down after roughly 15 minutes of inactivity if you do not turn it off manually.
  • You can change the auto-shutoff time in your console settings if 15 minutes does not work for your routine.
  • A controller that will not turn off may have a low battery and should be charged before troubleshooting further.

Where to find the auto-shutoff setting

Go to your console's Settings menu and look for "Devices" or "Controllers". From there, select "Bluetooth Devices" or "Controller Settings" depending on your PlayStation model. You should see an option for "Power Saving" or "Controller Power Saving".

In that submenu, you can change how long the controller waits before shutting down on its own. The options usually range from 10 to 30 minutes, or you can turn auto-shutoff off entirely if you prefer to manage it manually. Keep in mind that turning off auto-shutoff will drain your battery faster when you are not playing.

What to do if your controller will not turn off

If the power menu does not appear when you hold the PlayStation button, your controller battery may be too low. Plug the controller into a USB cable connected to your console or a wall outlet and let it charge for at least 30 minutes before trying again.

If the controller still will not respond after charging, try a hard reset. Locate the small reset button on the back of the controller near the L2 shoulder button. Use a paperclip or thin object to press and hold that button for five seconds. This will reset the controller to factory settings and may restore the power menu.

After a hard reset, you will need to pair the controller to your console again. Hold the PlayStation button until the light bar flashes, then go to your console's Bluetooth settings and select the controller from the list of available devices.

Charging your controller while it is off

You can charge a powered-down controller just as easily as one that is on. Plug the USB cable into the controller's charging port on the bottom edge and connect the other end to your console or a wall charger. The light bar will glow orange or white while charging, depending on your controller model.

Charging takes roughly two to three hours for a full battery from completely empty. You do not have to turn the controller on to charge it, and leaving it plugged in after it reaches full charge will not damage the battery.

Differences between PlayStation 4 and PlayStation 5 controllers

The PlayStation button works the same way on both the DualShock 4 (PS4) and the DualSense (PS5) — hold it for three seconds to see the power menu. The main difference is that the PS5 controller has a built-in microphone and speaker, but these do not affect how you turn off the device.

The PS5 controller also has a slightly different menu layout, but "Turn Off Controller" appears in the same place. Both controllers support the same auto-shutoff settings in your console's control panel, so the process for adjusting those timers is nearly identical.

Why your controller might drain battery quickly

If your controller battery runs out faster than usual, check whether auto-shutoff is turned on. A controller left powered on without auto-shutoff will drain completely in a few hours of sitting idle. Turning auto-shutoff back on in your settings will prevent this.

Vibration and haptic feedback also use battery power. If you play games with heavy vibration effects, your battery will drain faster than in games with minimal feedback. You can turn vibration off in individual game settings if battery life becomes a problem during long play sessions.

A controller that drains even when turned off may have a hardware fault. In that case, the battery itself may need replacement, which usually requires opening the controller or contacting PlayStation support for a repair or replacement unit.

Frequently Asked Questions

Can I turn off my controller without using the PlayStation button?

Yes. You can let it shut down automatically after 15 minutes of inactivity, or you can unplug it if it is charging. There is no other manual power button on the controller itself, so the PlayStation button menu is the main way to power it down on demand.

Will turning off my controller stop my game?

No. Turning off the controller does not pause or stop your game. Your console will keep running and your game will continue. If you need to stop playing, you must pause the game or quit it through the game menu before powering down the controller.

How do I know if my controller is actually off?

The light bar on the back of the controller will go dark when it is powered down. If the light is still glowing or flashing, the controller is still on. You can also try pressing the PlayStation button — if nothing happens, the controller is off.

What happens if I leave my controller on overnight?

The battery will drain completely by morning if auto-shutoff is not enabled. Once the battery is empty, the controller will not respond until you charge it again. Turning on auto-shutoff in your settings prevents this from happening.

Can I turn off multiple controllers at once?

No. You must turn off each controller individually by holding its PlayStation button for three seconds and selecting the power option. If you have multiple controllers, you will need to repeat this process for each one.