Press and hold the PlayStation button to power on your controller

The PlayStation button is the large circular button in the center of your controller. Press and hold it for about three seconds until you see the light bar on the back of the controller turn on. The light will be white or blue depending on which player number the controller is assigned to.

If the controller does not respond after three seconds, the battery may be empty. Plug the controller into a USB-C cable connected to your PlayStation console or a wall adapter and let it charge for at least 30 minutes before trying again.

Once the light bar turns on, your controller is powered on and ready to use. If you are connecting it to a console for the first time, the console will detect it automatically within a few seconds.

Key Takeaways

  • Hold the PlayStation button in the center of the controller for three seconds to turn it on.
  • A lit light bar on the back of the controller confirms it is powered on.
  • If the controller does not respond, charge it with a USB-C cable for at least 30 minutes.
  • The controller will pair with your console automatically once it is powered on and in range.
  • You can turn the controller off by holding the PlayStation button again and selecting Power Off from the menu.

What the light bar colors mean

The light bar on the back of your controller shows different colors to tell you the controller's status. A white light means the controller is on and not yet assigned to a player. A blue light means the controller is assigned to player one, red means player two, green means player three, and pink means player four.

If the light bar is off, the controller is powered down or the battery is dead. If the light bar is flashing or dimming, the battery is low and needs charging soon. A steady light means the battery has a normal charge.

Charging your controller when the battery is dead

PlayStation controllers use a built-in rechargeable battery. If your controller will not turn on, the battery is likely empty and needs to be charged before you can use it.

Connect a USB-C cable to the port on the bottom of the controller and plug the other end into your PlayStation console or a USB wall adapter. The light bar will turn on dimly while charging, even if the controller is off. Leave it plugged in for at least 30 minutes for a partial charge, or two to three hours for a full charge.

You can use the controller while it is charging if you plug it into the console. If you plug it into a wall adapter, you must wait until it has charged before you can turn it on and use it.

Pairing a controller to your console for the first time

When you power on a new or reset controller near your PlayStation console, the console will detect it automatically. The light bar will flash while the controller is searching for the console, then turn solid once it has connected.

If the controller does not pair automatically, make sure Bluetooth is turned on in your console settings. You can also press the pairing button on the back of the controller (a small recessed button near the light bar) while holding the PlayStation button to force it into pairing mode. The light bar will flash rapidly when pairing mode is active.

Turning off your controller

To turn off your controller, hold the PlayStation button for three seconds. A menu will appear on your screen with options including Power Off. Select Power Off to shut down the controller. The light bar will turn off when ready.

If you do not turn off the controller manually, it will power down automatically after 10 to 15 minutes of inactivity to save battery. You can change this timeout setting in your console's power settings if you want the controller to stay on longer or turn off faster.

Troubleshooting a controller that will not turn on

If you hold the PlayStation button and nothing happens, the battery is dead. Charge the controller for at least 30 minutes using a USB-C cable connected to your console or a wall adapter. Do not assume the controller is broken until you have charged it fully.

If the controller still does not turn on after charging for an hour, try a different USB-C cable. Some cables are designed for data transfer only and do not carry power. If a different cable works, your original cable is faulty and should be replaced.

If the controller turns on but the light bar does not light up, or if the light bar is very dim, the battery may be failing. Controllers typically last three to five years before the battery degrades enough to cause problems. You can replace the battery yourself by opening the controller, or you can purchase a replacement controller.

Using multiple controllers at once

You can connect up to four controllers to one PlayStation console at the same time. Each controller will be assigned a player number shown by its light bar color: white for player one, blue for player two, red for player three, and green for player four.

To add a second controller, straightforward power it on near the console. It will pair automatically and be assigned the next available player number. You do not need to do anything else. All controllers will work together in multiplayer games and menus.

Frequently Asked Questions

How long does a PlayStation controller battery last on a full charge?

A fully charged PlayStation controller battery lasts between four and eight hours of active play, depending on the game and how much you use the vibration and light bar features. Games that use heavy vibration or have the light bar on constantly will drain the battery faster than games with minimal haptic feedback.

Can I use my PlayStation controller while it is charging?

Yes, if you plug the controller into your PlayStation console with a USB-C cable. You cannot use it while charging from a wall adapter — you must wait until it has enough charge to power on. Charging from the console takes longer than charging from a wall adapter.

Why is my controller light bar flashing instead of staying solid?

A flashing light bar usually means the controller is searching for the console or trying to pair. If it flashes for more than a minute, the console may not be in pairing mode. Try pressing the pairing button on the back of the controller while holding the PlayStation button to force pairing mode.

What should I do if my controller turns on but does not connect to the console?

Make sure your console is powered on and Bluetooth is enabled in the settings. Move the controller closer to the console and try again. If it still does not connect, restart both the console and the controller by powering them off and on again.

Is it bad to leave my controller plugged in overnight?

No. PlayStation controllers have built-in protection that stops charging once the battery is full, so leaving it plugged in will not damage the battery or the controller. However, charging from a wall adapter is faster than charging from the console if you need it ready quickly.