Press the power button on the top of the device

The PlayStation Portal power button is located on the top edge of the device, slightly to the left of center. Press and hold it for about two seconds until you see the PlayStation logo appear on the screen. The device will take 10 to 15 seconds to fully boot up.

When the Portal is powering on for the first time, you may see a setup screen asking you to connect to Wi-Fi and sign in with your PlayStation Network account. If you have already set up the device before, it will skip directly to the home screen once it finishes loading.

Key Takeaways

  • The power button is on the top edge of the Portal, slightly left of center—press and hold for two seconds.
  • The device takes 10 to 15 seconds to fully boot after you press the power button.
  • On first startup, you will need to connect to Wi-Fi and sign in with your PlayStation Network account.
  • If the Portal does not turn on, check that the battery has charge by connecting it to a USB-C power cable for at least 30 minutes.

Charge the battery before first use

The PlayStation Portal ships with a partially charged battery. Before you turn it on for the first time, connect it to a power source using the included USB-C cable and let it charge for at least one hour. A full charge takes about two hours and gives you roughly four to six hours of play time, depending on screen brightness and network conditions.

You can use the Portal while it is charging. The device will show a battery icon in the top right corner of the screen—a lightning bolt symbol means it is currently plugged in and charging.

Connect to Wi-Fi during setup

After the Portal powers on, the setup screen will ask you to select a Wi-Fi network. Use the on-screen keyboard or connect a USB keyboard to enter your network password. The Portal needs a stable 5 GHz Wi-Fi connection for the best performance—2.4 GHz networks will work but may cause lag or disconnections during play.

If you skip the Wi-Fi step, you can connect later by going to Settings on the home screen, selecting Network, and choosing your Wi-Fi network. The Portal will not stream games from your PlayStation 5 without an active internet connection.

Sign in with your PlayStation Network account

Once Wi-Fi is connected, the setup screen will prompt you to sign in. You can use the same PlayStation Network account that you use on your PlayStation 5, or create a new one if you do not have an account yet. Enter your email address and password on the on-screen keyboard.

If you have two-factor authentication enabled on your account, you will need to enter a code sent to your email or phone. This is a security step and happens only once during setup. After you sign in, the Portal will remember your account and you will not need to enter your credentials again.

Pair the Portal with your PlayStation 5

Before you can stream games, the Portal must be on the same Wi-Fi network as your PlayStation 5 and paired with it. On your PlayStation 5, go to Settings, select Devices, then Remote Play, and choose Add Device. A pairing code will appear on your PS5 screen.

On the Portal, go to Settings, select Remote Play, and enter the pairing code from your PS5. The two devices will connect within a few seconds. You only need to pair them once—after that, the Portal will automatically connect to your PS5 whenever both devices are on the same network and the PS5 is powered on or in rest mode.

What to do if the Portal will not turn on

If pressing the power button does nothing, the battery may be completely drained. Connect the Portal to a USB-C power cable and leave it plugged in for at least 30 minutes before trying again. Some devices take a few minutes to respond after being fully discharged.

If the Portal still does not turn on after charging, try a hard reset by holding the power button for 10 seconds. If that does not work, disconnect the power cable, wait 30 seconds, reconnect it, and try powering on again. Contact PlayStation Support if the device remains unresponsive after these steps.

Adjust brightness and volume after startup

Once the Portal is on and you are signed in, you can customize the display and audio. Press the Menu button (three horizontal lines) on the right side of the device to open the quick settings panel. From there, you can adjust screen brightness, volume, and Wi-Fi signal strength.

For more detailed settings, go to the home screen and select Settings. You can change controller sensitivity, enable or disable haptic feedback, adjust network preferences, and manage your account from this menu. These settings are saved to your account, so they will carry over if you use the Portal on a different Wi-Fi network.

Frequently Asked Questions

How long does it take for the Portal to turn on?

The Portal takes 10 to 15 seconds from the moment you press the power button until the home screen appears. If it takes longer than 30 seconds, the device may be stuck loading—try holding the power button for 10 seconds to force a restart.

Do I need to turn on my PlayStation 5 before using the Portal?

Your PS5 does not need to be fully powered on, but it must be in rest mode or active on the same Wi-Fi network. If your PS5 is completely off, the Portal will not be able to connect to it. You can turn on your PS5 remotely from the Portal once they are paired.

What if I forget my PlayStation Network password?

Go to the PlayStation Network website on a computer or phone and select "Forgot your password?" You will receive an email with a reset link. Once you create a new password, you can sign in on the Portal using the new credentials.

Can I use the Portal without Wi-Fi?

No. The Portal streams games from your PlayStation 5 over the internet, so it requires a Wi-Fi connection at all times. Without Wi-Fi, you will not be able to access any games or features.

Is the Portal fully charged when I buy it?

No. The Portal ships with a partial charge, usually enough for a few minutes of use. Charge it for at least one hour before your first gaming session to may support the battery is fully ready.