Start with the basics: HDMI cable and power
A PS5 that won't show a picture on your TV usually comes down to three things: a loose or damaged HDMI cable, the wrong TV input selected, or the PS5 not fully powered on. Before you troubleshoot anything else, check these first.
Unplug the HDMI cable from both the PS5 and the TV, wait 10 seconds, and plug it back in firmly. Push until you hear or feel a click. A cable that looks connected but isn't seated all the way is the most common reason for no signal. If the cable is more than a few years old or has been bent sharply, try a different HDMI cable if you have one—they fail more often than people realize.
Next, make sure your PS5 is actually on. The power button should be pressed until the console beeps and the light turns white (not blue). If the light is blue, the PS5 is in rest mode and won't output video. Press the button again to turn it fully on. Wait 30 seconds for the console to boot before expecting a picture.
Key Takeaways
- Check your HDMI cable for loose connections at both ends and replace it if it is visibly damaged or more than five years old.
- Make sure your TV is set to the correct HDMI input—most TVs have multiple HDMI ports, and you need to select the one your PS5 is plugged into.
- Restart your PS5 by holding the power button for 10 seconds until it shuts down completely, then turn it back on.
- If you see a blue light instead of white, your PS5 is in rest mode and needs to be powered on fully before it will send video to your TV.
- Try a different HDMI port on your TV or a different HDMI cable to rule out hardware failure.
Select the right HDMI input on your TV
Your TV has multiple HDMI ports, and you need to tell it which one to display. This is the second most common reason a PS5 appears not to be connected. Pick up your TV remote and look for a button labeled "Input," "Source," or "HDMI." Press it and a menu will appear showing all available inputs.
Find the HDMI port number where your PS5 cable is plugged in—it will say something like "HDMI 1," "HDMI 2," "HDMI 3," or "HDMI 4." Select that input. Your TV should now show either the PS5 home screen or a blue screen with a controller icon. If you see the controller icon, your PS5 is connected but waiting for you to press a button on the controller to finish setup.
If you are not sure which HDMI port your cable is in, unplug it from the TV, note which port it was in, and plug it into a different port. Then use your TV remote to switch to that new input. This helps you figure out which ports actually work—some HDMI ports on older TVs can fail.
Restart your PS5 completely
A restart clears temporary glitches that prevent the PS5 from sending video. Do not just unplug it; do a proper shutdown. Hold the power button on the front of the console for 10 seconds until the light turns off and you hear a beep. Wait 30 seconds, then press the power button once to turn it back on.
The PS5 will take about 30 to 60 seconds to boot. During this time, you may see a blue screen or a black screen—this is normal. Once the home screen appears, your connection is working. If you still see nothing after a full restart, move to the next step.
Try a different HDMI port or cable
HDMI cables and ports fail without warning. If you have a second HDMI cable, unplug the one from your PS5 and try the other one. Plug it into the same TV port and restart the PS5. If a different cable works, your original cable is damaged and needs to be replaced.
If you only have one cable, try plugging it into a different HDMI port on your TV. Some TV ports stop working over time, especially if they have been used heavily. Switch to HDMI 3 or HDMI 4 if you were using HDMI 1 or HDMI 2. Restart the PS5 and check if you get a picture. If this works, your TV port was the problem, not your PS5.
When buying a replacement HDMI cable, look for one labeled "HDMI 2.1" or "Ultra High Speed HDMI." These work with the PS5's 4K and high frame rate output. Cheaper cables sometimes work but may cause picture quality issues or drop the connection randomly.
Check your TV's picture settings and resolution
Once you have a picture, your TV might be set to a resolution your PS5 cannot output. Most modern TVs default to 4K, but some PS5 games run at 1080p or 1440p instead. If your picture looks wrong—stretched, cut off, or with black bars—your TV's zoom or aspect ratio setting may be the issue.
On your TV remote, look for a button labeled "Picture," "Display," or "Settings." Find the option for "Aspect Ratio," "Zoom," or "Picture Size" and set it to "Auto" or "Fit to Screen." This tells your TV to display whatever resolution the PS5 sends without cutting anything off. If you see black bars on the sides or top and bottom, try "Full" or "Stretch" instead, but this may distort the image slightly.
You can also check what resolution your PS5 is actually sending. Go to Settings > Screen and Video > Video Output Information on your PS5. This shows the resolution and refresh rate your console is using. If it says 1080p but your TV is a 4K model, that is fine—the PS5 will upscale the image automatically.
Reset your PS5 video output settings
If you have a picture but it looks wrong, or if your PS5 is stuck trying to output a resolution your TV cannot display, you can reset the video settings. Restart your PS5 and when ready hold the power button again for 10 seconds until it shuts down. Then hold the power button for another 10 seconds—the console will boot into Safe Mode.
In Safe Mode, select "Change Video Output (Resolution)" and choose a lower resolution like 1080p. This forces your PS5 to output at a resolution almost any TV can handle. Once you confirm this setting, your PS5 will restart and should display normally. You can then go back to Settings > Screen and Video and try higher resolutions if you want.
Safe Mode is also useful if your PS5 is outputting a resolution that makes your TV show a "no signal" message. Resetting to 1080p will get you a picture again so you can troubleshoot from there.
Check for loose connections inside the TV or PS5
If none of the above steps work, the problem may be inside your TV or PS5. Unplug both devices from power for 2 minutes. This clears any temporary electrical faults. Plug them back in and try again. Sometimes this alone fixes the issue.
If you still have no picture, the HDMI port inside your PS5 or TV may be damaged. This is rare but happens if the cable has been yanked hard or if something was plugged in at an angle. You cannot fix this yourself—the port would need to be replaced by a technician. Contact PlayStation Support or your TV manufacturer to discuss repair options.
Frequently Asked Questions
Why does my PS5 show a blue light instead of white?
A blue light means your PS5 is in rest mode, a low-power state where it is not sending video to your TV. Press the power button once to turn it fully on. The light will turn white and the console will boot up. Rest mode is useful for downloading games while the PS5 is off, but it will not display anything on your TV.
My TV says "no signal" even though the HDMI cable is plugged in. What do I do?
First, make sure you have selected the correct HDMI input on your TV using your remote. If the input is correct, restart your PS5 by holding the power button for 10 seconds. If you still see "no signal," try a different HDMI cable or a different HDMI port on your TV. If a different port works, that original port is damaged.
Can I use any HDMI cable with my PS5?
Any HDMI cable will work, but older or damaged cables may cause picture quality issues or drop the connection. For the best experience, use a cable labeled "HDMI 2.1" or "Ultra High Speed HDMI." These are designed for 4K and high frame rate output. Avoid very cheap cables under five dollars, as they often fail quickly.
What if my TV only has one HDMI port?
Older TVs sometimes have only one HDMI port. If that port is not working, you can use an HDMI switch or splitter to connect multiple devices, but this adds another potential point of failure. A better option is to have the TV port repaired or replaced by a technician, or to use a different TV if one is available.
Do I need a special HDMI cable for 4K gaming?
HDMI 2.1 cables are designed for 4K and higher frame rates, but standard HDMI cables often work fine for 4K at 60Hz, which is what most PS5 games use. If you are having picture quality issues or your TV is not recognizing the 4K signal, try an HDMI 2.1 cable. For 1080p gaming, any cable will work.