Start with the simplest fixes first
A PlayStation controller stops working for one of a few common reasons: the battery is dead, the connection has dropped, the controller needs a software update, or there is a hardware problem. Most of the time, the fix takes less than five minutes and does not require any tools or replacement parts.
Before you assume the controller is broken, charge it fully, restart your console, and re-pair the controller to your PlayStation. If none of those work, the troubleshooting steps below will help you narrow down what is actually wrong.
Key Takeaways
- A dead battery is the most common reason a controller stops responding—plug it in with the USB cable that came with your PlayStation for at least two hours.
- If the controller charges but still does not work, unpair it completely and pair it again by holding the pairing button on the back for three seconds.
- A controller that pairs but drifts, sticks, or has unresponsive buttons usually has a hardware problem that requires replacement.
- If your controller works on another PlayStation console, the problem is with your console's Bluetooth receiver, not the controller itself.
Charge the controller fully and check the battery light
Plug the controller into your PlayStation console or a USB power adapter using the USB-C cable. The light on the controller will glow orange while charging and turn white when fully charged. Leave it plugged in for at least two hours even if the light turns white sooner—the battery may not be fully topped off.
If the light does not glow at all after five minutes of charging, try a different USB cable. The cable that came with your PlayStation is the most reliable, but any USB-C cable rated for power delivery will work. If a different cable makes the light glow, your original cable is damaged.
Once the controller is fully charged, hold the PlayStation button in the center for three seconds. The console should wake up or show the controller is connected. If nothing happens, move to the next step.
Restart your console and re-pair the controller
Turn off your PlayStation completely—not rest mode, but a full shutdown. Press and hold the power button on the front of the console until you hear two beeps, then wait ten seconds before turning it back on.
Once the console has restarted, hold down the pairing button on the back of the controller (the small button near the USB port) for three seconds. The light will flash white. Your console should recognize the controller and display a message on screen. This re-pairs the controller from scratch and often fixes connection problems.
If the controller still does not work after re-pairing, try connecting it to the console with the USB cable while the console is on. Some controllers will work over USB even when wireless pairing has failed, which tells you the problem is with the Bluetooth connection, not the controller itself.
Check for controller software updates
PlayStation releases firmware updates for controllers that fix connection problems and improve performance. To check for updates, go to Settings on your console, then Accessories, then Controllers. Select your controller from the list and look for an option to update.
If an update is available, connect the controller to your console with the USB cable and let the update finish. Do not unplug the controller or turn off the console during the update. This process usually takes two to five minutes.
After the update completes, disconnect the USB cable and test the controller wirelessly. Many connection and responsiveness issues are resolved by a firmware update alone.
Test the controller on another console or device
If you have access to another PlayStation 5 or PlayStation 4, try pairing your controller to it. If the controller works perfectly on the other console, the problem is with your console's Bluetooth receiver, not the controller. In that case, contact PlayStation Support about your console.
If the controller does not work on another console either, or if you do not have another console to test, move to the next section to identify whether the problem is a hardware failure.
Identify hardware problems: drift, sticking, and unresponsive buttons
If your controller charges, pairs, and connects but the buttons do not respond, the sticks drift on their own, or the buttons stick when you press them, you have a hardware problem. These issues cannot be fixed by software troubleshooting and usually require a replacement controller.
Stick drift means the camera or character moves on screen even when you are not touching the stick. Button sticking means a button stays pressed or requires extra force to register. Unresponsive buttons mean a button does nothing when you press it. All three are internal hardware failures.
Some people have had temporary success cleaning around the stick base with isopropyl alcohol on a cotton swab, but this is not a permanent fix and may void your warranty. If the controller is still under warranty (usually one year from purchase), contact PlayStation Support to arrange a replacement.
When to contact PlayStation Support
Contact PlayStation Support if your controller is still under warranty and you have confirmed it has a hardware problem. You will need your proof of purchase and the serial number of the controller, which is printed on the back.
If the controller is out of warranty, you can purchase a replacement controller from any retailer that sells PlayStation accessories. The official PlayStation controller is called the DualSense for PlayStation 5 and the DualShock 4 for PlayStation 4. Third-party controllers are available but may not have all the same features.
If you have tested the controller on another console and it works fine, but does not work on your console, your console's Bluetooth receiver may need service. Contact PlayStation Support with your console's serial number to discuss repair options.
Frequently Asked Questions
Can I use a wired connection instead of wireless?
Yes. Plug the controller into your console with the USB-C cable. It will work wired even if wireless pairing has failed. This is a good temporary solution while you troubleshoot the wireless connection or wait for a replacement.
How long does a PlayStation controller battery last?
A fully charged DualSense battery lasts four to eight hours depending on how much you use the haptic feedback and adaptive trigger features. If you use those features heavily, battery life will be shorter. Charge the controller overnight or whenever the light turns orange.
What if I see a message that says the controller is not compatible?
This usually means you are trying to use a PlayStation 4 controller on a PlayStation 5, or vice versa. PlayStation 5 controllers work on PlayStation 4 consoles, but PlayStation 4 controllers do not work on PlayStation 5. Check which console you own and use the correct controller.
Does resetting the controller to factory settings help?
Resetting the controller erases all pairing information and returns it to default settings. Hold the small reset button on the back of the controller for five seconds using a paperclip or pin. Then re-pair it to your console. This can fix pairing problems but will not fix hardware issues like drift or unresponsive buttons.
Is it cheaper to repair a controller or buy a new one?
Replacement controllers cost between forty and seventy dollars depending on where you buy them. Official repair services through PlayStation are usually not available for controllers—they typically offer replacement instead. If your controller is under warranty, replacement is free.