Your PlayStation is not connecting to your TV because of a loose or damaged HDMI cable, wrong input source selected on the TV, or a problem with the HDMI port itself

The most common reason is a loose HDMI cable — the connector that carries the picture and sound from your PlayStation to your TV. Check both ends: the one plugged into the back of your PlayStation and the one plugged into the TV. Push each one in firmly until you hear or feel a click. If the cable looks bent, kinked, or has visible damage to the connector, replace it with a new HDMI cable.

The second most common reason is that your TV is set to the wrong input. Your TV has multiple inputs (HDMI 1, HDMI 2, HDMI 3, and so on), and it will only show a picture from the input where your PlayStation is actually plugged in. Use your TV remote to find the input or source button — it is usually labeled "Input", "Source", or "HDMI" — and cycle through until you see your PlayStation menu or a blue screen that says "No Signal".

Key Takeaways

  • Push the HDMI cable firmly into both the PlayStation and the TV until it clicks, because a loose connection is the most common cause of a black screen.
  • Use your TV remote to select the correct HDMI input — your TV will not show a picture from your PlayStation unless you are watching the right input channel.
  • If you see a picture but no sound, check that the TV volume is not muted and that the audio output setting on your PlayStation is set to HDMI.
  • A damaged HDMI cable or port requires a replacement cable or professional repair, but you can test this by trying a different HDMI cable first.

Check the HDMI cable and ports

Inspect the HDMI cable from end to end. Look for kinks, cuts, or bent pins inside the connector. If the cable looks damaged, replace it — HDMI cables are inexpensive and wear out over time, especially if they are bent or pinched behind furniture.

If the cable looks fine, unplug it completely from both the PlayStation and the TV. Wait five seconds, then plug it back in firmly. Push until you feel resistance and hear a small click. Do this for both ends. A cable that looks connected but is not fully seated will show a black screen or "No Signal" on your TV.

If you have a second HDMI cable available, try plugging your PlayStation into the TV with that cable instead. This tells you whether the problem is the cable itself or the port. If a different cable works, your original cable is faulty. If the second cable also does not work, the HDMI port on your PlayStation or TV may be damaged, and you will need to contact the manufacturer or a repair service.

Select the correct HDMI input on your TV

Your TV has multiple HDMI ports, and each one is a separate input channel. Your PlayStation picture will only appear on the input where you plugged the HDMI cable in. If you plugged it into HDMI 3, you must select HDMI 3 on your TV to see it.

Pick up your TV remote and look for a button labeled "Input", "Source", or "HDMI". Press it. Your TV will display a menu showing all available inputs — usually HDMI 1, HDMI 2, HDMI 3, HDMI 4, and sometimes "TV" or "Cable". Use the arrow buttons on the remote to highlight the HDMI input where your PlayStation cable is plugged in, then press Enter or OK. The screen should change to show either your PlayStation home menu or a message that says "No Signal" (which means the cable is loose or damaged).

If you are not sure which HDMI port your PlayStation is plugged into, look at the back of your TV. The HDMI ports are usually labeled 1, 2, 3, or 4 next to each connector. Count from left to right or top to bottom to match the port to the input name on your TV remote.

Verify the PlayStation audio and video settings

Once you see your PlayStation menu on the TV screen, check that both picture and sound are working. If you see the picture but hear no sound, the problem is usually the audio output setting on your PlayStation, not the TV connection itself.

Go to your PlayStation Settings menu. Navigate to Sound and Screen, then Audio Output. Make sure the setting is "HDMI" or "HDMI Out", not "Optical" or another option. If it is set to something other than HDMI, change it to HDMI and test again. Also check that your TV volume is not muted — use your TV remote to unmute or turn up the volume.

If you see no picture at all, go back to Settings, then Sound and Screen, then Video Output. Check that the resolution is set to "Automatic" or a resolution your TV supports — most modern TVs support 1080p or 4K. If the resolution is set very high and your TV cannot display it, you may see a black screen. Set it to Automatic and restart your PlayStation.

Power cycle your PlayStation and TV

Sometimes a temporary software glitch will prevent your PlayStation from sending a signal to your TV. A power cycle — turning both devices completely off and back on — often fixes this.

Turn off your PlayStation using the power button on the console. Turn off your TV using its power button or remote. Unplug the power cable from the back of your PlayStation and wait 30 seconds. Plug it back in and turn it on. Turn your TV on and select the correct HDMI input. This gives both devices a fresh start and clears any temporary connection problems.

Test with a different HDMI port on your TV

If you have tried a new HDMI cable and a power cycle but still see no picture, try plugging the cable into a different HDMI port on your TV. Some TV ports can fail while others still work. Unplug the HDMI cable from its current port, plug it into a different HDMI port on the TV, and select that new input using your TV remote.

If your PlayStation picture appears on a different port, the original port is faulty and you will need to use a different port going forward. If no HDMI port on your TV shows a picture from your PlayStation, the problem is likely the HDMI port on your PlayStation itself, and you should contact PlayStation Support or a repair service.

When to contact PlayStation Support or a repair service

If you have checked the HDMI cable, tried different ports, powered everything off and on, and adjusted the video settings, but your PlayStation still will not connect to your TV, the problem is likely a hardware failure — either a damaged HDMI port on the PlayStation or on the TV.

Contact PlayStation Support through the official PlayStation website or call their support line. They can walk you through additional troubleshooting steps and advise whether your console needs repair. If the problem is your TV, contact the TV manufacturer's support line. If your HDMI cable is damaged, replacement cables are available at most electronics retailers and online.

Frequently Asked Questions

Why does my TV say "No Signal" when my PlayStation is plugged in?

This usually means the HDMI cable is loose or damaged. Unplug the cable from both ends, wait five seconds, and plug it back in firmly until you hear a click. If that does not work, try a different HDMI cable. If a new cable still shows "No Signal", the HDMI port on your PlayStation or TV may be faulty.

I see a picture but no sound from my PlayStation. What do I do?

Check that your TV volume is not muted using your TV remote. Then go to your PlayStation Settings, Sound and Screen, Audio Output, and make sure it is set to "HDMI". If it is set to "Optical" or another option, change it to HDMI. Restart your PlayStation and test again.

My PlayStation worked fine yesterday but will not connect today. What changed?

The HDMI cable may have come loose, or your TV input may have switched to a different channel. Check that the cable is pushed in firmly at both ends, and use your TV remote to select the correct HDMI input. If that does not work, power off both devices completely, wait 30 seconds, and turn them back on.

Can I use a different type of cable instead of HDMI?

No. PlayStation 5 and PlayStation 4 require an HDMI cable to connect to a TV. Older PlayStation models like PS3 had other cable options, but modern PlayStations only output video and audio through HDMI. You must use an HDMI cable.

How do I know if my HDMI cable is broken?

Look for visible damage: kinks, cuts, or bent pins inside the connector. If the cable looks fine but your PlayStation still will not show a picture, try a different HDMI cable. If the second cable works, your original cable is faulty and should be replaced.