Check Your Internet Connection First

PlayStation Network problems almost always start with your internet, not with PlayStation itself. Before you troubleshoot anything on the console, verify that your home network is actually working. Open a web browser on your phone or computer and try to load a website — if that works, your internet is up. If it doesn't, restart your modem and router (unplug them for 30 seconds, plug them back in, and wait two minutes for them to fully restart), then try again.

Once you know the internet works, check whether your PlayStation can see your network at all. Go to Settings > Network > Status on your console. If it shows "Not Connected" or lists your network but says "Cannot Connect", your PlayStation either cannot reach the router or cannot authenticate to it. Write down the exact error code if one appears — you will need it in the next steps.

Key Takeaways

  • Most PlayStation Network failures are caused by your home internet or router, not by PlayStation's servers — restart your modem and router before troubleshooting the console.
  • If your PlayStation cannot see your network at all, move the console closer to the router or switch to a wired ethernet connection, which bypasses WiFi problems entirely.
  • If your PlayStation connects to the network but cannot reach PlayStation Network services, restart the console completely (hold the power button for 10 seconds until it shuts down), then sign out and sign back in.
  • Check the PlayStation Network status page to confirm that servers in your region are actually online — sometimes the problem is on PlayStation's end, not yours.
  • If you see error codes like CE-33987-0 or NW-31250-1, write them down and search the PlayStation support site, because each code points to a specific problem with a specific fix.

Move Closer to Your Router or Use an Ethernet Cable

If your PlayStation is connected to WiFi and the status screen shows "Not Connected" or keeps dropping the signal, distance and interference are the most common culprits. Move your console closer to the router — even a few feet can make a difference. If that is not practical, switch to a wired connection instead. Plug an ethernet cable directly from your router into the ethernet port on the back of your PlayStation. Wired connections are more stable and faster than WiFi, and they eliminate interference from walls, microwaves, and other devices.

After you plug in the ethernet cable, go back to Settings > Network > Set Up Internet Connection and select Use a LAN Cable. The console will detect the connection automatically. If it still shows "Not Connected", unplug the ethernet cable, wait 10 seconds, and plug it back in. If the problem persists, try a different ethernet cable — the one you are using may be damaged.

Restart Your PlayStation Completely

A full restart clears temporary problems that a straightforward disconnect and reconnect will not fix. Do not just put the console in rest mode — actually shut it down. Hold the power button on the front of the console for 10 seconds until the screen goes black and you hear a beep. Wait 30 seconds, then press the power button again to turn it back on.

Once the console boots up, go to Settings > Users and Accounts > Other > Sign Out, then sign back in with your account. This forces the console to re-authenticate with PlayStation Network. Try connecting to a game or service that requires the network — if it works now, the restart solved the problem.

Check PlayStation Network Server Status

Sometimes your console and internet are both working fine, but PlayStation Network itself is down in your region. Visit the PlayStation Network Status page (search "PlayStation Network status" in any browser) to see whether services are online where you live. The page shows the status of different services — online multiplayer, the PlayStation Store, messaging, and others — and whether there are any known outages.

If the status page shows that a service you need is offline, there is nothing you can do except wait for PlayStation to fix it. Check back in an hour or two. If the status page shows everything is online but you still cannot connect, the problem is on your end, and you should continue with the other steps in this guide.

Check Your DNS Settings and Firewall

Your router has a DNS setting that tells your PlayStation how to translate website addresses into the numbers it needs to connect. If DNS is misconfigured, your PlayStation can connect to the internet but not to PlayStation Network. Go to Settings > Network > Set Up Internet Connection, select your network, and choose Custom. When you reach the DNS Settings screen, select Manual and enter these two addresses:

  • Primary DNS: 8.8.8.8
  • Secondary DNS: 8.8.4.4

These are Google's public DNS servers, and they work reliably with PlayStation. Save the settings and try to connect again. If your router has a firewall or parental controls enabled, it may be blocking PlayStation Network traffic. Log into your router's admin panel (usually by typing 192.168.1.1 into a browser) and check whether the PlayStation console is blocked or restricted. If it is, remove the restriction.

Rebuild Your Database or Restore Licenses

If you have tried everything above and your PlayStation still cannot reach the network, the console's internal database may be corrupted. Rebuilding it can fix connection problems without deleting your games or saves. Shut down the console completely (hold the power button for 10 seconds), then turn it back on while holding the power button again until you hear two beeps — this enters Safe Mode.

From the Safe Mode menu, select Rebuild Database. This process scans your hard drive and rebuilds the file system — it can take 15 minutes to an hour depending on how much data you have. Do not turn off the console while it is running. Once it finishes, restart normally and try to connect to the network again.

If rebuilding the database does not work, try restoring your licenses. Go to Settings > Users and Accounts > Other > Restore Licenses. This re-downloads the rights to play games tied to your account, which can sometimes fix connection issues related to account authentication.

Frequently Asked Questions

What does error code CE-33987-0 mean?

This error means your PlayStation cannot communicate with PlayStation Network servers. First, restart your modem and router, then restart your console. If the error persists, check the PlayStation Network status page to confirm servers are online. If servers are online, try changing your DNS to 8.8.8.8 and 8.8.4.4 as described above.

Why does my PlayStation connect to WiFi but not to PlayStation Network?

Your router is working, but something is blocking the specific ports PlayStation Network uses. Try switching to a wired ethernet connection to rule out WiFi interference. If that works, your WiFi signal is too weak or too noisy. If the wired connection also fails, check your router's firewall settings and make sure the PlayStation console is not blocked.

Can I fix this without restarting my router?

Possibly, but restarting your router clears temporary network glitches that are the cause in most cases. It takes two minutes and solves the problem more often than any other single step. If you want to skip it, move your PlayStation closer to the router or switch to an ethernet cable first.

What if I see "NW-31250-1" or another error code?

Each error code points to a specific problem. Write down the exact code and search for it on the official PlayStation support website. The support page for that code will explain what caused it and the exact steps to fix it. Do not guess — following the wrong steps can make the problem worse.

How long does it take for PlayStation Network to come back online after an outage?

Outages vary widely — some last 30 minutes, others several hours. Check the PlayStation Network status page for updates. If the page shows an outage is happening, there is nothing you can do except wait. If it shows everything is online but you still cannot connect, the outage is not the cause of your problem.