Old movie projectors typically sell for $50 to $500 depending on the model, condition, and rarity
The value of a vintage movie projector hinges on four things: what kind it is, whether it works, how rare it is, and who wants to buy it. A common 16mm projector from the 1970s in working condition might fetch $100 to $200. A rare 35mm theatrical projector or a sought-after brand like Kodak or Bell & Howell can reach $500 to $1,500. Broken projectors, missing parts, or common models sell for $20 to $75. The market is small but real — collectors, film schools, and hobbyists actively buy them.
Condition matters more than age. A 1950s projector that runs and has a clean lens is worth more than a 1980s model that is seized up or has a cracked lens. Rarity matters second. A projector made in the thousands is worth less than one made in the hundreds. Brand reputation matters third — Kodak, Bell & Howell, and Bolex command higher prices than unknown manufacturers. Where you sell it determines what you actually receive: eBay and Craigslist reach the widest audience but take fees or require you to handle shipping; local sales are faster but reach fewer buyers.
Key Takeaways
- A working 16mm projector in decent condition typically sells for $100 to $250, while rare or specialized models can reach $500 or more.
- Condition — whether it powers on, the lens clarity, and the state of the film gate — determines value more than the year it was made.
- Rarity and brand matter: Kodak, Bell & Howell, and Bolex projectors hold value better than generic or lesser-known brands.
- eBay, Craigslist, Facebook Marketplace, and specialty vintage electronics sites each reach different buyers and charge different fees.
- Getting a projector appraised by a vintage electronics dealer or film equipment specialist before listing can help you price it accurately.
How to check what your projector is worth
Start by identifying the exact model. Look on the projector body for a brand name and model number — these are usually stamped or printed on the housing or the lens barrel. Write down the brand, model, and any other markings you see. Then search that exact model on eBay's completed listings (filter to "sold" items only). Completed listings show you what people actually paid, not what sellers asked. Look at five to ten completed sales of the same model to get a range.
Check the condition of your projector next. Plug it in and see if it powers on. Does the fan run? Does the lamp light? Can you thread film through it without resistance? Look at the lens — is it clear, or is there dust, fungus, or haze inside? Check the film gate and rollers for rust, corrosion, or stuck film. A projector that powers on and has a clean lens is in "good" condition. One that powers on but has a cloudy lens or sticky mechanisms is "fair." One that does not power on or has major damage is "parts only."
Rarity affects price significantly. If you find ten completed eBay listings for your model, it is common and worth the lower end of the range. If you find only one or two, it is rare and worth more. Check specialist forums like 16mm.net or the Kodak Projector Collectors group on Facebook — members there know which models are sought after and can give you a realistic estimate based on your condition description.
Where to sell old movie projectors
eBay reaches the most buyers but charges 12.9% in fees (final value fee plus payment processing). List with clear photos of the projector powered on, the lens, the film gate, and any damage. Include the model number in the title. Shipping a projector costs $30 to $80 depending on weight and distance, so factor that into your asking price or offer local pickup. Auctions typically sell faster than fixed-price listings for vintage items.
Craigslist and Facebook Marketplace charge no fees and let you avoid shipping by selling locally. The trade-off is a smaller audience and more flaky buyers. Post clear photos, the model number, and a honest description of condition. Expect to negotiate. Local sales close in days rather than weeks.
Specialty sites like Etsy (for vintage items), 1stDibs (for collectibles), or local vintage electronics dealers take a cut but reach serious collectors willing to pay more. A dealer may also buy it outright for 40 to 60 percent of retail value, which is faster than listing but nets you less money.
Film schools and archives sometimes buy projectors for classroom or preservation use. Contact the media department at nearby colleges or your state's film archive. They may not pay market rate, but they buy without haggling.
Projector type and brand affect resale value
16mm projectors are the most common and sell for $75 to $300 depending on condition and brand. They were made for schools, churches, and home use from the 1950s through the 1990s. Kodak, Bell & Howell, and Bolex 16mm projectors hold value better than generic brands. A working Kodak Pageant or Bell & Howell Filmosound in good condition can fetch $200 to $400.
8mm and Super 8 projectors are smaller and less valuable — typically $30 to $150 — because they were made in huge numbers and fewer people use them now. However, a rare or well-built model like a Bolex or Eumig can reach $200 if it is in excellent condition.
35mm theatrical projectors are rare and valuable — $500 to $2,000 or more — but they are heavy, require special wiring, and appeal only to collectors or small theaters. If you have one, contact a film equipment specialist before listing.
Automatic-threading projectors (models that load film without manual threading) are worth more than manual ones because they are more convenient. Sound projectors (with built-in speakers or sound amplifiers) are worth more than silent ones. Projectors with zoom lenses are worth more than fixed-lens models.
Red flags that lower value
A projector with a cracked or fungus-covered lens is worth 50 percent less because replacing the lens costs $50 to $150. A projector with a stuck film gate, seized rollers, or corroded metal parts is worth less because repair is labor-intensive. Missing the original lens cap, manual, or takeup reel lowers value slightly — $10 to $30 — but does not kill the sale.
Projectors that do not power on are worth 60 to 70 percent less than working ones. The buyer has to troubleshoot the electrical system, which may be a blown capacitor (cheap fix) or a burned transformer (expensive). List these honestly as "parts only" or "for repair."
Projectors with non-original lenses or heavily modified internals are worth less because collectors prefer original equipment. If a previous owner swapped in a different lens or rewired the lamp circuit, mention it in your listing.
Pricing strategy for faster sales
Price 10 to 15 percent below the high end of what you found in completed listings. If working 16mm projectors of your model sold for $150 to $250, price yours at $200 to $220. This attracts buyers quickly without leaving money on the table. Overpriced listings sit for weeks and then sell for less anyway.
Offer local pickup if you are in or near a city. Buyers who can inspect the projector in person are more confident and close faster. If you must ship, offer it as an option but price it higher to cover your cost and risk.
Be honest about condition in your listing. A projector described as "untested" or "for parts" will attract the right buyer and avoid returns. A projector described as "works great" when it has a cloudy lens or sticky mechanisms will get returned or negative feedback.
Frequently Asked Questions
How do I know if my projector is worth getting repaired before selling?
Get a repair estimate first. If the repair costs more than 30 percent of the projected sale price, sell it as-is. A $200 projector is not worth a $100 repair. If the repair is under $50 and the projector is rare or in otherwise good condition, repair it — the sale price will likely cover the cost.
What is the difference between a projector worth $100 and one worth $500?
Rarity, brand, and condition. A common 16mm projector from a lesser-known brand is worth $100. A rare 35mm projector from Kodak or Bell & Howell in excellent working condition is worth $500. A projector that does not work is worth $30 to $50 regardless of brand.
Should I clean or restore my projector before selling it?
Clean the exterior gently with a dry cloth and a small brush to remove dust. Do not disassemble it or use solvents on the lens — you can damage it. A clean exterior and a clear lens add $20 to $50 to the sale price. Major restoration is not worth it unless you are selling a rare or high-value model.
Can I sell a projector that does not work?
Yes, but expect to sell it for 30 to 50 percent of what a working one brings. List it as "for parts or repair" and describe what does not work — does not power on, lamp does not light, film gate is stuck. Buyers who repair vintage equipment will still buy it, but at a lower price.
Where can I learn about my projector is rare?
Search the model number on eBay completed listings, Etsy, and 1stDibs. Check vintage electronics forums and Facebook groups dedicated to film equipment. If you find only one or two listings for your model, it is rare. If you find dozens, it is common. Rare does not always mean valuable — it depends on whether collectors want it.