The three ways to connect projector audio to speakers
A projector produces video but often produces weak or no audio on its own. You have three main routes: run an audio cable from the projector's audio output jack to powered speakers, connect speakers through an AV receiver that sits between the projector and your display, or use Bluetooth if your projector and speakers both support it. Which one works depends on what outputs your projector has and what inputs your speakers accept.
The simplest setup is usually a direct cable connection using a 3.5mm audio jack (the same size as a headphone plug) or RCA cables (the red and white connectors). This works when ready and requires no setup beyond plugging in the right cable. Bluetooth is convenient if both devices support it, but some projectors have weak Bluetooth range or drop connection. An AV receiver gives you the most control and lets you switch between multiple sources, but it adds cost and complexity.
Key Takeaways
- Most projectors output audio through a 3.5mm headphone jack or RCA connectors on the back panel.
- Powered speakers (speakers with a built-in amplifier) connect directly to the projector with a single cable and need only a power outlet.
- Passive speakers require an AV receiver or amplifier between the projector and the speakers to boost the audio signal.
- Check your projector's manual to find which audio outputs it has, because not all projectors have the same connectors.
Identifying your projector's audio outputs
Open your projector's manual or look at the back panel to find the audio connectors. Most projectors have at least one of these: a 3.5mm audio jack (looks like a headphone port), RCA connectors (a pair of red and white plugs), or HDMI with audio embedded in the signal. Some newer projectors also have Bluetooth. Write down which ones you see—you will need this information to choose the right cable.
If your projector connects to a laptop, streaming device, or cable box through HDMI, the audio travels through that same HDMI cable. However, many projectors do not send audio back out through HDMI; they only receive it. Check your manual to confirm whether your model can output audio through HDMI or whether you need to use a separate audio port.
Connecting powered speakers with a 3.5mm cable
This is the fastest setup. Powered speakers have an amplifier built in, so they only need power and an audio signal. Buy a 3.5mm audio cable (also called an aux cable or headphone cable) long enough to reach from your projector to the speakers. Plug one end into the projector's 3.5mm audio output jack and the other into the audio input on the back of the speaker. Plug the speakers into a power outlet and turn them on.
If the sound is too quiet or too loud, use the volume dial on the speaker itself to adjust. Most projectors also have a volume setting in their menu, so you can control it from the remote as well. Start with the projector volume at 50 percent and adjust the speaker volume to a comfortable level.
Connecting powered speakers with RCA cables
If your projector has RCA outputs (red and white connectors) instead of a 3.5mm jack, use RCA audio cables. These are the same cables that connected old stereo equipment. Plug the red connector into the red RCA jack on both the projector and the speaker, and the white connector into the white jack on both. The red cable carries the right channel and the white carries the left; they must match on both ends or you will lose sound from one side.
RCA cables are inexpensive and widely available at electronics stores. They also tend to be more durable than 3.5mm cables for permanent installations. If your speakers have only one pair of RCA inputs and you want to connect multiple sources (a projector and a streaming device, for example), you will need an audio mixer or switch box to combine the signals.
Using Bluetooth if your projector and speakers support it
Some projectors and many modern speakers have Bluetooth built in. To connect them wirelessly, put the speakers in pairing mode (usually by holding a button on the back for a few seconds—check the speaker manual). Then go into your projector's menu, find the Bluetooth section, and select the speaker name from the list of available devices. Once paired, the projector will connect to those speakers automatically when you turn it on.
Bluetooth is convenient because there are no cables to run, but it has limits. The range is usually 30 feet or less, and walls or metal objects can weaken the signal. If your projector is far from the speakers or in a different room, a wired connection is more reliable. Also, if the Bluetooth connection drops, you may lose audio until you manually reconnect.
Connecting passive speakers through an AV receiver
Passive speakers have no amplifier and cannot connect directly to a projector. They need an AV receiver (also called an amplifier or audio receiver) to boost the audio signal. Connect your projector to the receiver's audio input using an RCA or 3.5mm cable, then connect the speakers to the receiver's speaker outputs using speaker wire. Plug the receiver into power and turn it on.
An AV receiver also lets you connect multiple audio sources—a projector, a streaming device, a cable box—and switch between them with a remote. This is useful if you use the same speakers for different purposes. However, receivers add cost and take up space, and they require speaker wire, which must be run and secured. For a straightforward projector-and-speaker setup, powered speakers are usually the better choice.
Troubleshooting no sound or low volume
If you connect everything but hear no sound, check these things in order. First, make sure the speakers are powered on and plugged in—look for a light on the speaker or listen for a hum. Second, check that the cable is plugged into the correct jack on both the projector and the speaker. Third, turn up the volume on both the projector (using the remote or menu) and the speaker itself. Fourth, check your projector's menu to make sure audio output is not muted or set to a different port.
If you hear sound but it is very quiet, the projector's volume may be set low. Raise it to 75 or 80 percent using the remote. If the speaker has a volume knob, turn it up as well. If one speaker is much louder than the other, check that both RCA cables are plugged in firmly—a loose connection on one side can cause imbalance. If you are using Bluetooth and the sound cuts out, move the speaker closer to the projector or remove obstacles between them.
Frequently Asked Questions
Can I connect my projector to a soundbar instead of speakers?
Yes. Soundbars are powered speakers designed for TVs and projectors. Connect them the same way you would connect regular powered speakers—with a 3.5mm cable, RCA cables, or Bluetooth, depending on what your soundbar accepts. Many soundbars have multiple input options, so check the back panel to see which one matches your projector's audio output.
What if my projector has no audio output at all?
Some projectors are video-only and have no audio connectors. In this case, you need to get audio from the source device (a laptop, streaming box, or cable box) instead. Connect that device to your speakers or receiver directly, and the audio will play through the speakers while the video plays on the projector. This works as long as the source device has audio outputs.
Do I need special cables or will any audio cable work?
Any standard 3.5mm or RCA audio cable will work. You do not need expensive cables—cheap ones from a hardware store work just as well. The only thing that matters is that the connector type matches your projector and speaker. A 3.5mm cable will not fit an RCA jack, and vice versa.
Can I use my projector's built-in speaker instead of connecting external speakers?
Most projectors have a tiny built-in speaker, but it is usually very quiet and tinny. It is meant as a backup, not as your main audio. If you want decent sound, external speakers are worth the small cost and effort to connect. Even inexpensive powered speakers sound much better than a projector's internal speaker.
What is the difference between powered and passive speakers?
Powered speakers have an amplifier inside and plug directly into power and your projector. Passive speakers have no amplifier and need an AV receiver to work. Powered speakers are simpler and cheaper for a projector setup. Passive speakers are better if you want to build a larger system with multiple speakers in different rooms.