Connect via Wireless Mirroring or HDMI Adapter
The HY300 projector connects to your phone through two main methods: wireless mirroring (which works over your home WiFi network) or a physical HDMI adapter cable. Wireless mirroring is faster to set up if your phone supports it, while the HDMI adapter method works with any phone but requires a cable and adapter. Most people start with wireless mirroring because it eliminates cables, though HDMI gives you a more stable connection if you plan to leave the projector running for hours.
Before you start, make sure your HY300 is powered on and has finished its startup sequence—you'll see the home menu appear on the wall or screen. Your phone should be on the same WiFi network as the projector, or you should have the HDMI adapter and cable ready. The entire setup takes about two to three minutes once you have the right equipment.
Key Takeaways
- Wireless mirroring requires your phone and HY300 to be on the same WiFi network, and the process differs between iPhones (AirPlay) and Android phones (Miracast or the HY300 app).
- HDMI adapter connections work with any phone but require a USB-C or Lightning to HDMI adapter cable, which you may need to purchase separately.
- The HY300 projector has a built-in WiFi module, so you do not need a separate device to enable wireless connection.
- Audio plays through the projector's built-in speaker by default, but you can route it to external speakers if the projector has an audio output jack.
- If wireless mirroring disconnects, restart both your phone and projector, then reconnect—this solves most connection problems.
Wireless Mirroring on Android Phones
Android phones use a standard called Miracast to mirror their screen wirelessly. On most Android devices, you access this through the Quick Settings menu. Swipe down from the top of your screen twice to open Quick Settings fully, then look for a button labeled "Cast," "Screen Cast," or "Wireless Display." Tap it, and your phone will search for nearby devices. The HY300 should appear in the list within 10 to 15 seconds.
Tap the HY300 name to connect. Your phone's screen will appear on the projector within a few seconds. If the HY300 does not show up, make sure both devices are on the same WiFi network—check your phone's WiFi settings and confirm the network name matches the one your projector is connected to. Some Android phones also have a dedicated app for the HY300 projector; if you have it installed, you can launch that app instead and select "Mirror" or "Cast Screen" from the menu.
Once connected, your phone's screen will mirror everything—apps, videos, photos, and notifications. The connection stays active until you swipe down and tap "Cast" again to disconnect, or until you turn off the projector. Battery drain is noticeable during mirroring, so plug in your phone if you plan to use it for more than an hour.
Wireless Mirroring on iPhones
iPhones use AirPlay to mirror wirelessly. Swipe down from the top-right corner of your screen to open Control Center. Look for a button labeled "Screen Mirroring" (it shows a rectangle with a triangle at the bottom). Tap it, and your iPhone will search for AirPlay-compatible devices. The HY300 should appear in the list within 10 to 15 seconds.
Tap the HY300 name. If the projector asks for a PIN code, it will display a four-digit number on the wall or screen—enter this number on your iPhone and tap "Connect." Your iPhone's screen will then appear on the projector. If you do not see a PIN prompt, the connection may be when ready. Once mirrored, your iPhone screen stays synchronized with the projector until you tap "Screen Mirroring" again and select "Stop Mirroring."
AirPlay works best when your iPhone and HY300 are within 30 feet of each other and on the same WiFi network. If the connection drops, open Control Center again and reconnect—this usually takes just a few seconds. Like Android mirroring, AirPlay drains your battery faster than normal use, so charge your phone if you plan a long session.
Connecting with an HDMI Adapter Cable
If wireless mirroring is not working or you prefer a wired connection, you can use an HDMI adapter. First, identify which port your phone has: iPhones use Lightning (a small rectangular port), and most Android phones use USB-C (a small oval port). You will need to purchase an adapter that matches your phone's port and outputs to HDMI—these are available at electronics stores or online for $15 to $40.
Plug the adapter into your phone's charging port. Connect an HDMI cable to the adapter's HDMI output, then plug the other end of the HDMI cable into the HDMI port on the back of the HY300 projector. The projector should recognize the input automatically and display your phone's screen within a few seconds. If it does not, use the projector's remote to press the "Input" or "Source" button and select "HDMI" from the menu.
HDMI connections are more stable than wireless mirroring and do not drain your phone's battery as quickly. The trade-off is that you have a cable tethering your phone to the projector, which limits where you can move. Audio plays through the projector's speaker by default, just as it does with wireless mirroring.
Troubleshooting Connection Problems
If your phone does not find the HY300 during wireless mirroring, the most common cause is that the two devices are on different WiFi networks. Check your phone's WiFi settings and make sure it is connected to the same network name (SSID) as the projector. If you do not know which network the projector is on, restart the projector and look at the startup screen—it usually displays the network name.
If the connection keeps dropping after a few minutes, move your phone closer to the projector or to your WiFi router. Walls, metal objects, and other wireless devices can weaken the signal. Restarting both your phone and the projector also clears temporary connection glitches—turn off the projector completely, wait 30 seconds, then turn it back on and reconnect your phone.
For HDMI connections, if your phone's screen does not appear, try unplugging the HDMI cable and plugging it back in. Make sure the cable is fully inserted into both the adapter and the projector. If you see a message on your phone saying the adapter is not supported, the adapter may be damaged or counterfeit—try a different adapter if possible.
Audio and Video Quality Settings
By default, both audio and video play through the projector. The video quality depends on your phone's resolution and the projector's native resolution—the HY300 typically displays at 720p or 1080p depending on the model. If the image looks blurry or stretched, check your phone's display settings and make sure it is not set to a very high resolution that the projector cannot handle clearly.
Audio comes out of the HY300's built-in speaker, which is adequate for small rooms but may sound tinny in larger spaces. If the projector has an audio output jack (a 3.5mm headphone-style port on the back), you can connect external speakers or a soundbar to improve audio quality. Plug the speakers into the audio jack, and the projector will route sound to them instead of the built-in speaker. Your phone's volume controls still work—use your phone to adjust the overall volume.
Frequently Asked Questions
Can I use the HY300 without WiFi?
Yes. HDMI adapter connections work without WiFi because they use a direct physical cable. Wireless mirroring requires WiFi, but you do not need internet access—your phone and projector just need to be on the same local network.
Does the HY300 work with both iPhone and Android?
Yes. iPhones use AirPlay, and Android phones use Miracast or the HY300 app. Both methods work with the projector, though the steps are slightly different. If you have both types of phones in your household, each one will connect using its own method.
What if my phone does not have the Screen Mirroring option?
Older phones may not support wireless mirroring. Check your phone's settings to confirm it has Miracast (Android) or AirPlay (iPhone) support. If it does not, use an HDMI adapter instead—this method works with nearly any phone.
Can I charge my phone while it is connected to the projector?
With wireless mirroring, yes—your phone is not physically connected, so you can plug it into a charger. With an HDMI adapter, you cannot charge and project at the same time because the adapter uses your phone's only charging port. Some newer phones have multiple ports, but most do not.
Why does the image look dim or washed out?
The HY300's brightness depends on the room's ambient light and the projector's lamp condition. Darken the room as much as possible for the clearest image. If the image is still dim, the projector's lamp may need cleaning or replacement—check the projector's manual for lamp maintenance instructions.