The three ways to add sound to a projector
Most projectors have a built-in speaker, but it is small and tinny. To get real sound, you connect external speakers using one of three methods: an audio cable plugged into the projector's audio output, a wireless connection via Bluetooth, or an AV receiver that sits between your projector and speakers.
Which method works depends on what speakers you own, what ports your projector has, and whether you want to keep the setup straightforward or build something larger. The good news is that none of these connections are complicated—they are just different paths to the same result.
Key Takeaways
- Check your projector's manual or the back panel to find which audio outputs it has: 3.5mm headphone jack, RCA connectors, optical digital, or HDMI.
- A wired audio cable from the projector to powered speakers is the most straightforward setup and works with almost any projector.
- Bluetooth speakers pair wirelessly with projectors that support Bluetooth, but not all projectors have this feature—check your model first.
- An AV receiver lets you connect multiple speakers and other devices, but adds cost and complexity unless you are already building a home theater.
- If your projector has no audio output, you can run sound through your video source (like a streaming device or laptop) instead.
Finding the audio ports on your projector
Before you buy speakers or cables, look at the back and sides of your projector. Most projectors have at least one audio output port. The most common ones are a 3.5mm headphone jack (the same size as old earbuds), RCA connectors (two round plugs, usually red and white), or optical digital (a square port with a small door). Some projectors also have audio built into the HDMI port.
Check your projector's manual or the manufacturer's website if you cannot find the ports. The manual will list every connection option and tell you which one to use. If your projector is very old or very basic, it might have no audio output at all—in that case, you will route sound through your video source instead (see the section below).
Write down which ports you have. This determines which speakers and cables you can use.
Connecting powered speakers with a cable
Powered speakers (also called active speakers) have a built-in amplifier, so they only need a power outlet and an audio cable. This is the simplest setup for most people. You run a cable from your projector's audio output to the speaker's audio input, plug the speaker into the wall, and you are done.
Match the cable to your projector's port. If your projector has a 3.5mm headphone jack, buy a 3.5mm-to-RCA cable or a 3.5mm-to-3.5mm cable, depending on what input the speaker has. If your projector has RCA outputs, use an RCA-to-RCA cable. If it has optical digital, use an optical cable. These cables cost between $5 and $20 and are sold at any electronics store.
Plug one end into the projector and the other into the speaker. Turn on the projector and the speaker. You should hear sound. If you do not, check that the projector's audio output is not muted and that the speaker's volume is turned up. Some projectors have an audio menu where you can choose which output to use—check the manual if sound does not come through.
Using Bluetooth speakers for wireless sound
If your projector has Bluetooth, you can pair wireless speakers without running any cables. Not all projectors have this feature, so check your manual or the specifications on the manufacturer's website first. Look for "Bluetooth" or "wireless audio" in the feature list.
To pair a Bluetooth speaker, turn on the speaker and put it in pairing mode (usually by holding a button for a few seconds—check the speaker's manual). Then go into your projector's settings menu, find the Bluetooth section, and select the speaker from the list of available devices. Once paired, the projector will connect to that speaker automatically when you turn both on.
Bluetooth is convenient because there are no cables to run, but the range is usually 30 feet or less, and the sound quality depends on the speaker itself. If you move the speaker far from the projector or put obstacles between them, the connection may drop.
Running sound through an AV receiver
An AV receiver is a box that sits between your projector, speakers, and video sources. It amplifies sound, switches between inputs, and lets you connect multiple speakers at once. This is the setup for a full home theater, but it is overkill if you just want to add sound to a projector.
If you already own an AV receiver or plan to build a larger system, connect it this way: run an audio cable from your projector to the receiver's audio input, then run speaker cables from the receiver to your speakers. The receiver handles all the amplification and switching. This gives you the most control and the best sound quality, but it costs more and takes longer to set up.
For most people adding speakers to a single projector, a powered speaker or Bluetooth speaker is simpler and cheaper.
What to do if your projector has no audio output
Some older or very basic projectors have no audio output port at all. In this case, you route sound through your video source instead—the device sending the picture to the projector, like a streaming device, laptop, or cable box.
Connect speakers to that device using the same methods above: a cable to its audio output or Bluetooth pairing. The sound will come from your speakers while the picture comes from the projector. This works fine, but it means you have to control volume on the video source rather than the projector itself.
Troubleshooting common speaker connection problems
If you connected everything but hear no sound, start with the simplest checks. Make sure the speaker is plugged in and turned on. Check that the volume is turned up on both the speaker and the projector. Some projectors have a mute button or a setting that disables audio output—look in the menu or the manual.
If the cable is plugged in but still no sound, try a different cable. Audio cables can fail, and a bad cable looks the same as a good one. If you are using Bluetooth, unpair the speaker and pair it again—sometimes the connection gets stuck. If the projector has multiple audio outputs, try a different one.
If nothing works, check the projector's manual to confirm that the port you are using is actually an audio output. Some projectors have ports that look similar but serve different purposes. If you are still stuck, contact the projector's manufacturer—they can tell you whether the audio output is working or if the projector needs repair.
Frequently Asked Questions
Can I use regular passive speakers with a projector?
No. Passive speakers have no built-in amplifier and need a receiver to work. You can use them only if you connect an AV receiver between the projector and the speakers. For a straightforward setup, buy powered speakers instead.
What if my projector and speakers are in different rooms?
You can run a long audio cable through walls or ceilings if you are willing to do the work, but it is easier to use Bluetooth speakers in the same room as the projector. If you need sound in another room, add a second speaker there and pair it separately, or run video and audio to that room together.
Do I need to buy expensive speakers?
No. A basic powered speaker in the $50 to $150 range will sound much better than the projector's built-in speaker. More expensive speakers sound better, but you do not need them unless you are building a full home theater system.
Can I connect multiple speakers to my projector at once?
With Bluetooth, most projectors can pair only one speaker at a time. If you want multiple speakers, use an AV receiver to connect them all, or buy a Bluetooth speaker with a subwoofer that pairs as a single unit.
Will connecting speakers affect the projector's picture quality?
No. Audio and video are separate systems. Adding speakers will not change the picture at all.