The three ways to add sound to a projector

Most projectors have a built-in speaker, but it is small and tinny. To get real sound, you connect external speakers through one of three routes: an audio cable plugged into the projector's audio output jack, a wireless connection using Bluetooth, or an AV receiver that sits between your video source and the projector.

Which route you choose depends on what connections your projector has, what speakers you own, and whether you want to run other devices through the same speaker system. A wired connection is the most reliable and works with any speaker that has an input jack. Bluetooth is simpler if your speakers support it, but adds a step to setup. An AV receiver gives you the most control and lets you switch between multiple video sources without touching the projector.

The physical steps are straightforward once you know which method fits your setup. Most people can complete the connection in under five minutes.

Key Takeaways

  • Check your projector's audio outputs — most have a 3.5mm headphone jack or RCA audio ports, and some have both.
  • Wired connections using a 3.5mm or RCA cable are the most reliable and work with powered speakers, passive speakers through an amplifier, or a soundbar.
  • Bluetooth speakers pair directly to the projector if it has Bluetooth, but you will need to re-pair them each time you power on the projector.
  • An AV receiver lets you connect the projector, your video source, and multiple speakers in one system, and handles audio switching automatically.
  • Test the connection with actual video and sound before mounting the projector, so you can troubleshoot while everything is accessible.

Finding the audio outputs on your projector

Look at the back and sides of your projector for audio ports. The most common is a 3.5mm headphone jack — the same size as a phone headphone port. Some projectors also have RCA audio ports, which are two small round connectors, usually red and white. A few newer projectors add Bluetooth capability, listed in the manual or on the spec sheet.

Check your projector's manual or the manufacturer's website if you cannot find the ports visually. The manual will show a diagram of the back panel and label every connection. If your projector has no audio output at all, you will need to run audio from your video source (like a streaming device or laptop) directly to your speakers instead of through the projector.

Write down which ports your projector has. This determines which speakers and cables you can use.

Connecting speakers with a 3.5mm cable

If your projector has a 3.5mm headphone jack, this is the easiest wired route. Buy a 3.5mm-to-3.5mm cable (also called an aux cable) long enough to reach from the projector to your speakers — typically 10 to 25 feet depending on your room layout. Plug one end into the projector's audio output jack and the other into the audio input on your speakers.

Turn on the projector and your speakers. Open a video on your source device (streaming app, laptop, Blu-ray player, whatever you are using). You should hear sound from the speakers. If you do not, check that the projector's volume is not muted or turned all the way down — use the projector's remote or menu to adjust it.

If the speakers have their own volume knob, set it to a medium level first, then use the projector's volume control to fine-tune. This gives you the most flexibility later.

Connecting speakers with RCA cables

RCA audio ports are two round connectors, red and white, usually grouped together on the back of the projector. If your projector has these instead of a 3.5mm jack, you will need an RCA audio cable — two separate cables with RCA connectors on both ends, or a single cable with RCA connectors on one end and a 3.5mm plug on the other.

Match the colors: red RCA connector to the red port, white to the white port. Plug the other end into your speakers' RCA audio inputs. If your speakers do not have RCA inputs, you can buy an RCA-to-3.5mm adapter at any electronics store for under ten dollars.

Turn on the projector and speakers, play a video, and adjust the volume the same way as with a 3.5mm connection. RCA cables are thicker and more durable than 3.5mm cables, so they are a good choice for a permanent setup.

Using Bluetooth speakers with your projector

If your projector has Bluetooth, you can pair wireless speakers without any cable. Go into the projector's menu or settings — usually accessed through the remote — and look for a Bluetooth or wireless option. Put your speakers into pairing mode (check their manual for how; usually it is a button you hold for a few seconds). Select the speaker name from the projector's menu and confirm the pairing.

Once paired, the projector will remember the speaker. However, you will need to manually reconnect them each time you turn the projector on, because most projectors do not auto-reconnect to Bluetooth devices. This is a minor inconvenience but not a deal-breaker if you use the same speakers every time.

Bluetooth works well for casual viewing, but wired connections are more reliable for regular use because they do not drop or require re-pairing. If your speakers are already Bluetooth-enabled and you do not mind the extra step, it is a clean setup with no cables to run.

Setting up an AV receiver for multiple speakers and sources

An AV receiver is a box that sits between your video source and your projector. It handles both video and audio, and lets you connect multiple speakers — front left, front right, center, surround, and subwoofer — in a surround-sound setup. It also lets you switch between multiple video sources (streaming device, Blu-ray player, gaming console) without unplugging anything.

Connect your video source to the receiver's HDMI input. Connect the receiver's HDMI output to the projector. Connect your speakers to the receiver's speaker terminals or audio outputs. The receiver routes both video and audio from your source to the projector and speakers at the same time.

This setup is more complex than a straightforward speaker connection, but it is worth it if you have multiple video sources or want surround sound. Most receivers cost between 150 and 400 dollars, depending on how many speakers they can handle and what features they include.

Troubleshooting common connection problems

If you connect everything but hear no sound, check these things in order: Is the projector's volume turned up? Is the speaker powered on? Is the cable plugged in firmly on both ends? Try wiggling the cable at each end to make sure the connection is solid. If you are using Bluetooth, is the speaker actually paired, or did the pairing fail?

If the sound is very quiet even at full volume on both the projector and speakers, the cable may be loose or damaged. Try a different cable if you have one. If the sound cuts out randomly, a Bluetooth connection may be dropping — move the speaker closer to the projector or switch to a wired connection.

If you have an AV receiver and sound is not working, make sure the receiver is set to the correct input (the one your video source is plugged into) and that the receiver's volume is not muted. Check the receiver's manual for the mute button location, as it is straightforward to hit by accident.

Frequently Asked Questions

Can I use a soundbar instead of separate speakers?

Yes. A soundbar is a single speaker unit that plugs into the projector the same way — via 3.5mm, RCA, or Bluetooth. It takes up less space than multiple speakers and is simpler to set up. The sound quality is usually better than the projector's built-in speaker but not as good as a full surround-sound system with a subwoofer.

What if my projector has no audio output at all?

Connect audio directly from your video source to your speakers, bypassing the projector. If your streaming device, laptop, or Blu-ray player has a headphone jack or audio output, plug your speakers into that instead. The video still goes to the projector, but the audio goes straight to the speakers.

Do I need a special cable or can I use any 3.5mm cable?

Any 3.5mm cable works. They are all the same electrically. The only difference is length and durability. For a projector setup, buy a cable long enough to reach from the projector to your speakers without stretching, and check that the connectors fit snugly into the ports.

Will Bluetooth speakers work if the projector is far from the speakers?

Bluetooth typically works reliably up to 30 feet in an open room, but walls and obstacles reduce that range. If your speakers are more than 20 feet away or separated by multiple walls, a wired connection is more reliable. Bluetooth also uses battery power on the speaker side, so you will need to charge them regularly.

Can I connect multiple speakers to the projector at once?

Not directly through the projector's audio jack — it outputs to one destination. To use multiple speakers, either connect them in series (one speaker's output to the next speaker's input), use an AV receiver to split the audio signal, or buy powered speakers with built-in amplifiers and connect them in parallel through a splitter cable.