The fastest methods when you don't have a projector
You can trace an image without a projector by using your phone or tablet as a light source, holding it behind translucent paper, or by scaling and printing the image to trace by hand. The simplest method is to tape your reference image to a window during daylight, place tracing paper over it, and draw the outline as light passes through both layers. If you need to enlarge the image first, you can print it in sections, use a grid method to scale it up manually, or display it on a screen and trace directly from the glow.
Each method works best for different image sizes and materials. A window works for small to medium images and costs nothing. A phone or tablet screen works for tracing onto dark paper or fabric. The grid method takes longer but gives you precise control over the final size and works on any surface.
Key Takeaways
- A sunny window with tracing paper is the cheapest method and works well for images up to about 8 by 10 inches without any equipment.
- Your phone or tablet screen can act as a backlight for tracing onto dark paper or fabric if you display the image at full brightness.
- The grid method lets you enlarge any image to any size by drawing a grid over the original, then drawing a larger grid on your final surface and copying square by square.
- Printing the image in sections and taping them together lets you trace larger images without scaling, though it requires more paper and tape.
- A lightbox made from a picture frame and a phone flashlight works for small images and costs under ten dollars to build.
Using a window and tracing paper
Tape your printed or drawn image to a window with the side you want to trace facing outward. Place a sheet of tracing paper or thin white paper on top of the image, also taped to the window. The daylight passing through both layers makes the image visible enough to trace with a pencil or pen. This method works best on a cloudy day or in indirect sunlight, since bright direct sun can create harsh shadows.
The image size is limited by your window, so this works for originals up to about 8 by 10 inches. If your image is smaller, you can enlarge it on a photocopier or printer before taping it to the window. The tracing paper should be thin enough to see through but thick enough not to tear as you draw. Standard 20-pound copy paper works if you don't have tracing paper.
Tracing from a phone or tablet screen
Display your image on your phone or tablet at full brightness and set it to stay on. Place your paper or fabric directly on the screen and trace the outline with a pencil, pen, or fabric marker. This method works best on dark or colored paper where the light from the screen shows through clearly. On white paper, the contrast is too low to see the image well.
The screen size limits your image to roughly 5 by 8 inches, depending on your device. For larger images, you can trace in sections, moving the paper to a new area of the screen and matching up the edges as you go. Turn off any screen rotation lock so you can flip the device to landscape if your image is wider than it is tall. Be aware that the heat from the screen running at full brightness for extended periods can damage some devices, so take breaks every 10 to 15 minutes.
The grid method for scaling and tracing
Draw or print a grid of equal squares over your original image — a half-inch grid works for most small images. On your final surface (paper, canvas, or fabric), draw a larger grid with the same number of squares but at whatever size you need. Then copy the image square by square from the original grid to the enlarged grid, using the grid lines as guides to keep proportions correct.
This method takes longer than other options but gives you complete control over the final size and works on any surface. You can scale the image up or down by straightforward making the squares on your final grid larger or smaller. Use a light pencil on your final surface so you can erase the grid lines after you finish tracing. For a 4 by 6 inch original, a half-inch grid creates 48 squares; for a 1-inch grid, you get 12 squares, which traces faster but with less detail.
Printing and taping sections together
If your image is larger than a single sheet of paper, print it across multiple pages using the "poster" or "tile" setting in your printer. Most printers have this option in the print dialog under Page Setup or Layout. The printer will split the image into sections and print each one on a separate page. Tape the printed pages together on the back side with clear tape, then tape the assembled image to a window or lightbox and trace as usual.
This method avoids the need to scale the image and works for images of any size, limited only by how many pages you're willing to tape together. The seams between pages can make tracing slightly harder at the edges, so take care to line them up precisely before taping. After you finish tracing, you can untape the pages and reuse them.
Building a straightforward lightbox from household items
A basic lightbox costs almost nothing to make. Take a picture frame or shallow wooden box, remove the back, and place a phone flashlight or small LED light underneath the glass or clear plastic. Set your image on top of the light source and place your tracing paper over the image. The light shining up through the layers makes the image visible for tracing.
This setup works best for small images — up to about 5 by 7 inches — because the light spreads unevenly across larger areas. You can improve the light spread by taping white paper or aluminum foil inside the frame to reflect light more evenly. A phone flashlight running continuously will drain the battery in an hour or two, so this method is best for short tracing sessions. If you plan to use it often, a small USB-powered LED panel (available for under fifteen dollars) is more practical than a phone flashlight.
Tracing directly from a printed image
For small images or straightforward outlines, you can skip the light source entirely and trace directly from a printed image using a pencil and light pressure. Place your tracing paper over the printed image and draw the outline by following the lines you see. This works best when the printed image has dark, clear lines and you're working on white or light-colored paper.
The downside is that you can't enlarge the image this way, and the printed image can shift under your hand as you draw. Taping both the printed image and the tracing paper to a flat surface prevents movement. This method is fastest for small images and requires no equipment, but it's slower than using a light source because you have to look up and down constantly to follow the lines.
Frequently Asked Questions
Can I trace from a computer monitor instead of a phone screen?
Yes, but it's less practical. Computer monitors are usually farther from your body, making it harder to hold paper steady while tracing. Phone and tablet screens are smaller and easier to position directly under your paper. If you use a monitor, place it flat on a table, tape your paper to the screen, and trace from above.
What kind of paper works best for tracing?
Tracing paper is ideal because it's thin and translucent, but standard 20-pound copy paper works fine for window tracing. For phone or tablet screens, use white or light-colored paper so the backlight shows through. On dark paper or fabric, any weight works because you're reading the light from the screen, not light passing through the paper.
How do I trace an image that's much larger than my window or screen?
Use the grid method or print the image in sections. The grid method takes longer but works for any size. Printing in sections is faster if your printer can handle the poster setting. You can also trace in multiple passes, moving the paper to a new section of the window or screen each time and matching up the edges.
Will tracing from a phone screen damage my device?
Running the screen at full brightness for extended periods generates heat that can stress the battery and display over time. Take breaks every 10 to 15 minutes to let the device cool down. This method is safe for occasional use but not ideal for tracing large images that take an hour or more.
Can I use this method to trace onto fabric?
Yes. A phone or tablet screen works well for tracing onto dark fabric because the light shows through clearly. A window works for light-colored fabric. Use a fabric pencil or chalk marker instead of a regular pencil so the marks don't smudge. Test your marker on a scrap of fabric first to make sure it washes out if needed.