The fastest ways to show content on a wall or large surface
You can display images and video on a large screen without a projector by using a TV, a monitor with an HDMI cable, a white sheet and a bright light source, or your phone's screen mirroring to a smart TV. The method that works best depends on what you own, how large you need the display to be, and whether you need the image to be bright enough for a lit room.
If you already have a television, that is your simplest option — plug in your device and play. If you do not have a TV but have a computer monitor, an HDMI cable can connect it to a laptop or streaming device. For a temporary setup or outdoor display, a white sheet hung on a wall with a bright light behind or beside your content source can work, though the image will be dimmer than a TV and only visible in a dark room.
Key Takeaways
- A television is the easiest substitute for a projector if you already own one, since it displays bright images in lit rooms and requires only an HDMI cable or wireless connection.
- A computer monitor connected via HDMI cable to a laptop or streaming device works for smaller audiences but produces the same brightness and color quality as a TV.
- A white sheet hung on a wall can serve as a projection surface if you position a bright light source (phone flashlight, desk lamp, or bright monitor) behind or beside your content, though the image will only be visible in darkness.
- Phone screen mirroring to a smart TV or smart display lets you show content from your device without cables, but requires both devices to be on the same wireless network.
- Outdoor displays work best with a white or light-colored wall, a bright light source, and darkness, since ambient light washes out any image.
Using a television or monitor as your display
A TV is the most practical replacement for a projector because it produces its own light, works in any room brightness, and displays sharp images without setup. Connect your source device — a laptop, streaming box, phone, or game console — using an HDMI cable or wireless casting. Most modern TVs support both wired and wireless connections, so you can plug in a cable or use your phone's built-in screen mirroring feature.
A computer monitor works the same way but is smaller, so it suits one or two viewers rather than a group. Monitors typically range from 24 to 32 inches, while TVs start at 40 inches and go much larger. If you have a monitor and a laptop, an HDMI cable is all you need. Plug one end into the monitor's HDMI port and the other into your laptop's HDMI or USB-C port (you may need an adapter for USB-C). Then set your laptop to extend or mirror the display in your system settings.
Both TVs and monitors are brighter than projectors, so they work well in rooms with windows or overhead lights. They also show color more accurately and do not require a dark room or a blank wall. The trade-off is that they take up physical space and are not portable the way a projector is.
Creating a DIY projection surface with a sheet and light
If you need a large display and do not have a TV, you can hang a white sheet on a wall and position a bright light source behind or beside your content. This works best with a phone, tablet, or monitor displaying the content you want to show. The light bounces off the sheet and creates a larger, dimmer version of the image on the wall behind it.
Hang a clean white bedsheet or white fabric tightly on a wall or between two stands. Position your light source — a phone flashlight, desk lamp, or bright monitor — close to the sheet, angled so the light reflects onto the wall. The closer the light is to the sheet, the larger the image will be, but the dimmer it will appear. Experiment with distance and angle to find the best balance.
This method only works in a dark room because ambient light washes out the reflected image. It is useful for outdoor movie nights, temporary events, or testing whether you want a projector before buying one. The image quality will not match a TV or actual projector, but it costs nothing if you already have a sheet and a light source.
Screen mirroring from your phone to a smart TV
If you have a smartphone and a smart TV on the same wireless network, you can mirror your phone's screen to the TV without cables. This lets you display photos, videos, or any app content on a large screen. Both iPhones and Android phones support this feature, though the method differs slightly between them.
On an iPhone, swipe down from the top-right corner to open Control Center, tap Screen Mirroring, and select your TV from the list. On an Android phone, swipe down twice to open Quick Settings, tap Cast or Screen Mirroring, and select your TV. Your phone's screen will appear on the TV within a few seconds. You can then play videos, scroll through photos, or use any app while the content displays on the larger screen.
The TV must support AirPlay (for iPhones) or Chromecast (for Android phones and most smart TVs). If your TV does not have this built in, you can buy a separate device like a Google Chromecast or Amazon Fire Stick that plugs into the TV's HDMI port and adds wireless casting. These devices cost between $25 and $50 and work with most phones and laptops.
Using a bright monitor or tablet as a light source
A bright computer monitor or tablet can act as both the content source and the light source for a DIY projection setup. Display your content on the monitor at full brightness, then position it close to a white sheet or wall. The light from the screen will project a dim image onto the surface behind it.
This works best with a monitor because monitors are brighter than tablets and can be positioned at any angle. Set your monitor to maximum brightness and display your content in full-screen mode. Hang a white sheet a few inches in front of the monitor, angled away from the monitor toward the wall. The image will appear on the wall behind the sheet, though it will be much dimmer than the original on the monitor.
This method is temporary and produces a low-quality image, but it requires no additional equipment beyond what you may already own. It is most useful for testing a layout or creating a novelty display rather than for regular viewing.
Outdoor and temporary projection setups
For outdoor events or temporary displays, a white or light-colored wall, fence, or hung sheet works as a projection surface. Position your light source — a phone, monitor, or bright lamp — at an angle to the surface so the light reflects outward toward viewers. The larger the distance between the light source and the surface, the larger the image will be, but the dimmer it will appear.
Outdoor setups require darkness to work well because sunlight and ambient light wash out any reflected image. Plan outdoor movie nights or presentations for after sunset. If you must use a setup during the day, choose the shadiest location available and use the brightest light source you have.
For a more permanent outdoor setup, paint a section of a wall with white or light gray paint to create a dedicated projection surface. This gives you a smooth, consistent background that reflects light evenly. Avoid glossy paint because it creates glare; use matte or flat paint instead.
Comparing brightness and image quality across methods
A television or monitor produces the brightest, sharpest image and works in any lighting condition. Both are designed to display content clearly and can show fine details, text, and color accurately. They are the best choice if image quality matters and you have access to either device.
A DIY sheet-and-light setup produces a much dimmer image that is only visible in darkness. The image will be softer and less detailed than a TV, and small text may be hard to read from a distance. This method is useful for casual viewing or testing but not for presentations where clarity is important.
Screen mirroring to a smart TV gives you the same brightness and quality as using a TV directly, since the TV is doing the displaying. The advantage is that you can control what appears on the screen from your phone without cables. The disadvantage is that you need both devices and a wireless network.
Frequently Asked Questions
Can I use a white wall instead of a sheet for projection?
Yes, if your wall is clean and painted white or light gray. A painted wall works better than a sheet because it is flat and does not move. Avoid glossy paint because it creates glare; use matte or flat paint. If your wall is not white, hang a white sheet in front of it.
What kind of light source works best for a DIY projection?
A bright desk lamp, phone flashlight, or monitor at maximum brightness all work. The brighter the light source, the brighter your projected image will be. Position the light as close to the sheet as possible without blocking the view. Avoid colored lights because they will tint the image.
Do I need an HDMI cable if I have a smart TV?
No, you can use wireless screen mirroring if your TV and phone are on the same network. An HDMI cable is faster and more reliable if you have one, but it is not required. If your TV does not support wireless casting, you can buy a Chromecast or Fire Stick device for $25 to $50.
Can I project onto a colored wall or fabric?
A colored surface will tint the image to match its color. White or very light gray works best because it reflects light without changing the colors you are displaying. If you must use a colored wall, hang a white sheet in front of it.
How far away can viewers sit from a DIY projection setup?
Viewers can sit as far back as they can still see the image clearly. With a bright light source and a white surface, the image will be visible from 10 to 20 feet away in a dark room. The farther back viewers sit, the larger the image appears, but the dimmer it becomes. Test your setup with viewers at different distances to find the best spot.