What the Dots Projector Does and When to Use It
The Dots Projector is a ghost-hunting tool in Phasmophobia that projects a grid of dots onto surfaces in a room. When a ghost moves through the projected area, it disrupts the dots, creating visible gaps or disturbances. This makes the ghost's movement visible even when you cannot see the ghost itself—useful during hunts when the lights are off or the ghost is invisible.
You use the Dots Projector to track a ghost's location and path during an active hunt. It works best in dark rooms or when the ghost is invisible, because the disrupted dots stand out clearly against the grid. The projector does not harm the ghost or reveal its type; it only shows you where the ghost is moving.
Key Takeaways
- The Dots Projector projects a grid of dots that the ghost disrupts when passing through, making invisible ghosts visible by their movement.
- set up the projector by holding it in your hand, aiming at a wall or floor, and pressing the use button—the dots will appear on the surface you are pointing at.
- The projector works during hunts and in dark rooms, but the ghost must physically move through the projected area for the dots to react.
- Position the projector to cover high-traffic areas where the ghost is likely to move, such as doorways, hallways, or the center of a room.
- The projector has limited battery life, so turn it off when you move to a new area to preserve power for when you need it most.
How to set up and Aim the Dots Projector
Pick up the Dots Projector from your equipment bag and hold it in your hand. Point it at a wall, floor, or ceiling where you expect the ghost to move. Press your use button (the default is E on keyboard or the interact button on controller) to turn it on. A grid of small dots will appear on the surface you are aiming at.
The dots spread across the surface in a rectangular pattern. The size and spread of the grid depend on how far away you are from the surface—closer surfaces show a tighter grid, and distant surfaces show a wider spread. Adjust your distance and angle to cover the area you want to monitor.
Once activated, the projector stays on until you turn it off or the battery drains. You can move around while it is running, but the dots will only appear on the surface you are currently pointing at. If you aim at a different wall, the dots move to that wall.
Reading Ghost Movement in the Dots
When a ghost passes through the projected dots, the dots in that area will flicker, disappear, or create a visible gap. The disruption happens in real time as the ghost moves, so you will see a trail or pattern of missing dots following the ghost's path. The stronger the disruption, the closer the ghost is to the projected surface.
If the dots show a small, localized disturbance, the ghost is moving through that specific spot. If the disturbance spreads across a large area, the ghost is either moving fast or is very close to the projector. Use this information to track which direction the ghost is heading and whether it is moving toward or away from you.
The dots will not react if the ghost is standing still. The projector only detects movement, so a stationary ghost will leave the dots undisturbed. This is useful for confirming whether a ghost has stopped hunting or is hiding in a corner.
Best Positions for the Dots Projector
Place the projector to cover doorways and hallways where the ghost must pass to move between rooms. Ghosts typically hunt in predictable paths, so positioning the dots at chokepoints gives you the most information with one projector. A doorway is ideal because the ghost cannot avoid it.
In large open rooms, aim the projector at the center of the floor or a main wall. This covers the most likely hunting ground and lets you see the ghost's approach from multiple directions. If you are hiding in a corner, point the projector at the entrance so you see the ghost coming before it reaches you.
You can also place the projector on a shelf, table, or the ground and leave it running while you move to another location. The dots will continue to project and react to the ghost even if you are not holding the device. This is useful for monitoring a room while you investigate another area.
Managing Battery Life and Switching Between Tools
The Dots Projector uses battery power, and the battery drains over time. Turn off the projector when you move to a new area or when you no longer need to track the ghost in that location. Press the use button again to deactivate it and preserve battery for later.
If the battery runs out, the projector will stop projecting dots. You can recharge it at the van or swap it for a fresh one from your equipment bag if you have a spare. Plan your battery use based on how long you expect to hunt in each area.
The Dots Projector does not interfere with other tools. You can switch between it and a flashlight, EMF meter, or thermometer without any penalty. Many players use the projector during the hunt phase and switch to other tools when the hunt ends.
Common Mistakes and How to Avoid Them
The most common mistake is aiming the projector at a surface too far away. If you are standing far from a wall, the dots spread out and become harder to see clearly. Move closer to the wall or aim at a nearer surface like the floor directly in front of you for a tighter, more visible grid.
Another mistake is leaving the projector on when you do not need it. This drains the battery and leaves you without it later when the ghost hunts in a different room. Turn it off as soon as you move to a new area or when the hunt phase ends.
Do not rely on the projector alone to find the ghost. It only shows movement, not the ghost's type or exact location. Use it alongside other tools like the EMF meter or thermometer to gather more evidence and narrow down which ghost you are dealing with.
Finally, do not point the projector at reflective surfaces like mirrors or windows. The dots may reflect unpredictably or not appear at all. Stick to walls, floors, and ceilings for the clearest projection.
Combining the Dots Projector with Other Equipment
Use the Dots Projector with a flashlight to track the ghost in very dark rooms. The flashlight lights up the area so you can see the dots clearly, while the projector shows you where the ghost is moving. This combination is especially useful in basements or unlit hallways.
Pair the projector with a motion sensor for extra safety. Set the motion sensor near the projector so it alerts you if the ghost approaches from a different angle. This gives you warning before the ghost reaches you and lets you escape if needed.
The projector works well with the thermometer and EMF meter for evidence gathering. While the projector tracks the ghost's movement, use the other tools to record temperature drops or electromagnetic spikes. This speeds up the evidence collection process and helps you identify the ghost faster.
Frequently Asked Questions
Can the Dots Projector see through walls?
No. The projector only works on surfaces you can see and aim at directly. It cannot project through walls or detect ghosts on the other side of a closed door. You must have a clear line of sight to the surface where you want the dots to appear.
Does the Dots Projector work during non-hunt phases?
Yes, the projector works anytime you turn it on, but it is most useful during hunts when the ghost is actively moving. Outside of hunts, the ghost does not move enough to create visible disruptions in the dots, so there is no reason to use the battery.
What happens if the ghost walks directly toward me while I am holding the projector?
The dots will show the ghost's approach as a growing disturbance moving closer to you. The disruption will become more intense as the ghost gets nearer. This is your cue to run or hide before the ghost reaches you.
Can I use the Dots Projector to prove a ghost is in a specific room?
The projector shows movement but does not prove the ghost's location on its own. A ghost could be in an adjacent room and still cause dots to react if it is close enough to the projected surface. Use the projector with other evidence tools to confirm which room the ghost is actually in.
Is the Dots Projector better than other tracking tools?
The projector is useful for tracking movement, but it does not gather evidence like the EMF meter or thermometer do. Use it for safety and navigation during hunts, not as your primary evidence-gathering tool. Different tools serve different purposes, and the best approach uses multiple tools together.