What the Network Scanner Holotape does
The Network Scanner Holotape is a tool you load into a Pip-Boy to locate and map nearby computers and network terminals on your game map. Once activated, it scans the surrounding area and marks the positions of networked devices so you can find them without wandering blind. The holotape does not hack the terminals for you — it only shows you where they are.
This is most useful when you are looking for a specific terminal in a building you have not fully explored, or when you need to find a computer to access a particular network. The scan covers a limited radius around your character, so you may need to move to different locations to map out all the terminals in a large area.
Key Takeaways
- Load the Network Scanner Holotape into your Pip-Boy through the Holotapes menu to run a scan of nearby networked devices.
- The scan marks terminal and computer locations on your map within a set radius, but does not reveal what those terminals control or contain.
- You can run multiple scans from different positions to map terminals across a wider area or a larger building.
- The holotape shows you where to go, but you still need to physically reach each terminal and solve its hacking puzzle yourself.
Loading the holotape into your Pip-Boy
Open your Pip-Boy menu and navigate to the Holotapes section. Find the Network Scanner Holotape in your inventory list and select it. The game will prompt you to confirm that you want to play the holotape.
Once you confirm, the holotape runs and performs a scan of the area around your current position. The scan happens when ready — you do not need to stand still or wait for a progress bar. After the scan completes, your map updates to show the locations of any networked devices within range.
Reading the scan results on your map
Networked terminals and computers appear as markers on your local map after the scan runs. The markers are usually labeled clearly so you can distinguish them from other map icons. Each marker points to a single device or a cluster of devices in that location.
The scan does not tell you what the terminal does, what network it belongs to, or what hacking difficulty it has. You have to travel to the marker and interact with the terminal to find out. This means you may discover a terminal is locked behind a Master-level hack, or that it controls something you do not need — the holotape only solves the "where" problem, not the "what" problem.
Scanning multiple areas to build a complete map
If you are exploring a large building or outdoor area, one scan may not reveal all the terminals. Move to a different room or section and run the holotape again from your new position. Each scan covers only the radius around where you are standing, so repositioning lets you map devices that were out of range before.
This is especially useful in multi-level buildings or sprawling facilities. Scan from the ground floor, then move upstairs and scan again. The new markers will add to your existing map, gradually building a complete picture of where all the networked devices are located.
When the holotape does not find terminals
If you run a scan and no new markers appear, either there are no networked devices within range, or you have already mapped all the terminals in that area. The holotape does not distinguish between these two situations — it straightforward shows you what is there.
If you are looking for a specific terminal and the scan does not find it, try moving closer to where you think it should be, or check a different floor or section of the building. Some terminals are in locked rooms or behind doors you have not opened yet, and the scan may not detect them until you are closer or have access to that space.
Using the scan results to plan your route
Once you have marked the terminals on your map, you can decide which ones to visit based on what you are trying to accomplish. If you need to access a specific network or unlock a particular door, head to the terminal that controls it. If you are just exploring and gathering information, you can visit the terminals in whatever order makes sense for your path through the building.
Remember that reaching a terminal and hacking it are two different tasks. The holotape gets you to the right location, but you will still need to solve the hacking puzzle at each terminal. If you do not have the Hacking skill or the right password, you may not be able to access what the terminal controls.
Frequently Asked Questions
Can I use the Network Scanner Holotape more than once?
Yes. You can run the holotape as many times as you want. Each time you use it, it scans the area around your current position and updates your map. There is no limit to how many scans you can perform, so feel free to use it repeatedly as you explore.
Does the holotape show me passwords or hack the terminals for me?
No. The holotape only shows you where the terminals are located on your map. It does not reveal passwords, difficulty levels, or what the terminals control. You have to reach each terminal and interact with it yourself to see what it does and attempt to hack it.
What if a terminal is inside a locked room I cannot enter?
The scan may still detect the terminal if you are close enough to the room, even if you cannot access it yet. Once you find a key, unlock the door, or find another way into the room, you can then reach the terminal. The holotape just marks the location — it does not open doors for you.
Does the scan range change based on my character's skills or perks?
No. The Network Scanner Holotape has a fixed scan radius that does not change based on your character's stats, skills, or perks. The range is the same every time you use it, regardless of your Hacking skill or Intelligence.