The basic steps to scan a QR code

Most phones can scan a QR code using the built-in camera app — you don't need to read anything. Open your camera, point it at the QR code from about 6 inches away, hold steady for a second or two, and a notification will pop up with a link or information. Tap the notification and your phone opens whatever the code connects to: a website, a phone number, contact information, or WiFi details.

If nothing happens after a few seconds, your phone may not have QR scanning turned on, or the code may be damaged or too small to read. The steps to turn it on vary slightly between iPhones and Android phones, but both are quick.

Key Takeaways

  • iPhones with iOS 11 or newer can scan QR codes directly from the camera app without any settings change.
  • Android phones may need QR scanning enabled in camera settings, or you can use Google Lens from the Google app instead.
  • Hold your phone 6 to 8 inches from the code and keep it steady — the camera needs a clear, straight-on view to read it.
  • If a notification doesn't appear after 2 to 3 seconds, try moving closer, adjusting the angle, or checking that the code isn't torn or faded.

How to scan on an iPhone

Open the Camera app from your home screen. Point the rear camera at the QR code and hold your phone steady. You should see a yellow notification banner appear at the top of the screen within a second or two — it will show the link or information the code contains. Tap the banner to open it.

iPhones running iOS 11 or later have QR scanning built in and turned on by default, so you don't need to change any settings. If you don't see a notification after a few seconds, move closer to the code or check that it's not damaged. Make sure you're using the rear camera, not the front-facing selfie camera.

How to scan on an Android phone

Open your Camera app and point it at the QR code. If your phone supports QR scanning, a notification will appear with the code's information. Tap it to open the link or details.

Not all Android phones have QR scanning in the camera app by default — it depends on the manufacturer and Android version. If nothing happens, try using Google Lens instead: open the Google app, tap the camera icon at the bottom, point it at the code, and wait for the result to appear. You can also read a dedicated QR scanner app from the Google Play Store, though the built-in options usually work fine.

Positioning and distance matter

Hold your phone 6 to 8 inches away from the QR code — close enough that the code fills most of your camera screen, but not so close that it's blurry. The camera needs a clear, straight-on view. If you're at an angle, the code becomes harder to read.

Keep your phone as still as possible for 1 to 2 seconds while the camera focuses. If you're moving or shaking, the camera may not lock onto the code in time. Lighting matters too — make sure the code is well-lit and not in shadow or glare. A code printed on paper works best in natural light or bright indoor light.

What to do if the code won't scan

If the notification doesn't appear after 2 to 3 seconds, try these steps in order: move closer to the code, adjust your angle so you're looking straight at it rather than from the side, and make sure the code isn't torn, faded, or partially covered. Codes that are damaged or very small are harder or impossible to scan.

If the code still won't scan, check that your camera app has permission to access the camera — go to your phone's Settings, find Apps or Permissions, and make sure the Camera app is allowed. On Android, you can also try Google Lens or a dedicated QR scanner app instead. On iPhone, make sure you're running iOS 11 or newer by checking Settings > General > Software Update.

What happens after you scan

When you tap the notification, your phone opens whatever the code links to. This is usually a website, but it can also be a phone number (which opens your dialer), an email address, contact information, or WiFi login details. Always check the notification to see what the code contains before you tap it — this helps you avoid accidentally opening something you didn't intend.

If the code links to a website, your browser will open and load the page. If it's a phone number, your phone app will open with the number ready to dial. For WiFi codes, your phone will show a prompt asking whether you want to connect to that network.

Frequently Asked Questions

Do I need an app to scan QR codes?

No. iPhones with iOS 11 or newer and most modern Android phones can scan QR codes using the built-in camera app. You only need a separate app if your phone's camera doesn't support QR scanning, which is rare on phones made in the last five years.

Can I scan a QR code from a photo on my phone?

Yes, on iPhones and some Android phones. Open the Photos app, select the image with the QR code, and tap it — a notification should appear with the code's information. On Android, you can also open the image in Google Lens by tapping the camera icon in the Google app.

Is it safe to scan QR codes?

QR codes themselves are safe, but always check the notification before you tap it to see where the code will take you. Avoid scanning codes from unknown sources or codes that have been altered or covered with stickers, as these could link to harmful websites.

Why is my QR code not scanning even though it looks fine?

The code may be too small, at the wrong angle, or in poor lighting. Try moving closer, adjusting your angle to face the code straight-on, and moving to better light. If the code is printed on a shiny surface, try reducing glare by tilting your phone slightly.

What if the QR code links to a website that looks suspicious?

Don't tap it. Check the notification carefully before opening any link. If a code came from an unknown source or looks altered, it's safer to skip it. Legitimate QR codes from businesses or official sources will link to recognizable websites.