Programming a Uniden Scanner: The Basic Process
Most Uniden scanners let you enter frequencies and settings through the keypad on the unit itself, though the exact steps depend on your model. The general process is: power on the scanner, press Menu or Program, navigate to a blank channel slot, type in the frequency you want to monitor, set any additional options like tone or mode, and save. Uniden makes handheld models like the BC125AT and BC346XT, as well as desktop units like the BC785D, and each has slightly different button layouts and menu structures—so your first step is finding the manual for your specific model number.
If you have lost the printed manual, Uniden publishes PDF versions on their website organized by model. You can also find community-maintained guides on scanner forums like RadioReference.com, where users post screenshots and step-by-step walkthroughs for popular models. Having the manual open while you program makes the process much faster because you will know which buttons control which functions on your unit.
Key Takeaways
- Most Uniden scanners use the keypad to enter frequencies directly, but the button sequence varies by model—check your manual first.
- You will need the exact frequency in megahertz (MHz) for the service you want to monitor, available on RadioReference.com or your local police or fire department's website.
- Many scanners let you organize frequencies into banks or groups so you can monitor only certain services at once.
- Tone squelch and mode settings (FM, AM, or digital) depend on the service you are monitoring and are usually optional for basic listening.
Finding the Right Frequencies to Program
Before you can program anything, you need to know what frequencies to enter. RadioReference.com is the most complete free source—search for your city or county and you will find listings for police, fire, EMS, public works, and other services, usually sorted by agency. Many local government websites also publish their radio frequencies in the public records section, and some police departments list them on their main page.
Write down the frequency in megahertz (MHz) exactly as it appears. For example, a police dispatch frequency might be listed as 460.1250 MHz. That full number is what you type into the scanner. If a frequency is listed as "460.125" without the trailing zero, it is the same thing—the scanner will display it the same way either way.
Some frequencies come with additional information like "PL tone 131.8" or "DCS 023"—these are squelch codes that filter out transmissions you do not want to hear. If you are just starting out, you can program the frequency without the tone and still hear the service; adding the tone later will reduce background noise from other users on the same frequency.
Programming a Single Frequency on a Handheld Model
On handheld Uniden scanners like the BC125AT, the process usually goes: press Menu, scroll to "Program" or "Add Channel," press Enter, select an empty channel number, type the frequency using the number pad, press Enter, then scroll through optional settings like mode (FM or AM) and tone, and press Menu again to save. The exact wording and button names vary, so follow your manual's sequence rather than guessing.
One common mistake is pressing the wrong button to save. Some models require you to press Menu to confirm and exit, others use a dedicated Save or OK button. If you enter a frequency and it disappears when you turn off the scanner, you did not save it—go back and repeat the sequence, paying close attention to the final step.
After you program a frequency, turn the scanner on and listen for a moment to make sure you hear the service you expected. If you hear nothing, the frequency may be inactive at that moment, or you may have entered it incorrectly. Double-check the number against your source and try again.
Using Banks and Groups to Organize Frequencies
Most Uniden scanners let you organize frequencies into banks (also called groups or channels). This means you can program 100 frequencies total but listen to only 20 at a time by activating one bank. This is useful if you monitor multiple cities or want to switch between police and fire without scrolling through a long list.
To set up banks, consult your manual for the "Bank" or "Group" menu. You typically assign each frequency to a bank when you program it, or you can move frequencies between banks later. Some models let you name banks—for example, "City Police" or "County Fire"—which makes scanning easier when you switch between them.
If your scanner has a "Scan" button, pressing it will cycle through all active frequencies in the selected bank. Some models also let you set a delay so the scanner pauses for a few seconds after hearing a transmission before moving to the next frequency, giving you time to hear the full conversation.
Setting Mode and Tone Options
Most public safety frequencies in the United States use FM (frequency modulation), so that is the default mode on most scanners. Some older services or railroad frequencies use AM (amplitude modulation). Your frequency source will tell you which mode to use, but if it does not specify, FM is almost always correct. You can usually change the mode in a menu after you enter the frequency.
Tone squelch—also called PL tone, CTCSS, or DCS—filters out transmissions that do not have the right tone code. If a frequency listing includes "PL 131.8" or "DCS 023," that is the tone code. Programming the tone is optional; without it, you will hear all transmissions on that frequency, including background noise and cross-talk. With it, you hear only transmissions from radios using that same code. Most scanners have a menu option to enter the tone number after you program the frequency.
If you are not sure whether to use a tone, start without it. You can always add it later if the frequency is too noisy. Some services do not use tones at all, and programming an incorrect tone will cause you to hear nothing on that frequency.
Troubleshooting Common Programming Problems
If you program a frequency and the scanner will not save it, the most common cause is that the channel slot is already in use. Try selecting a different channel number. If the scanner says "Invalid Frequency," you may have entered a number outside the range your model supports—check your manual for the frequency range (most handheld models cover 25 MHz to 1300 MHz, but some do not cover all bands).
If you hear nothing on a frequency you programmed correctly, the service may not be transmitting at that moment, or the frequency may be inactive. Try a different frequency from the same agency to confirm your scanner is working. If you hear only static or noise, you may need to add the tone code for that frequency—check your source again and reprogram with the tone included.
If the scanner loses all your programmed frequencies when you turn it off, the batteries may be too low to hold the memory. Replace the batteries or charge the unit fully, then reprogram. If it happens again, contact Uniden support—the memory backup may be failing.
Using Software to Program Multiple Frequencies at Once
Some Uniden models, particularly desktop units like the BC785D, can be programmed using a computer and USB cable instead of the keypad. Uniden publishes free software for these models on their website. You read the software, connect the scanner to your computer, and enter frequencies into a spreadsheet-like table, then upload them all to the scanner at once.
This method is much faster if you are programming 50 or more frequencies. You can also save your frequency list as a file, which means you can back it up or share it with other scanner users. Some community members have created pre-made frequency lists for popular cities that you can import directly.
Check your scanner's model number on Uniden's website to see if software is available for your unit. If it is, read it and the USB cable instructions from the same page. The software usually works on both Windows and Mac, though older versions may require Windows only.
Frequently Asked Questions
Can I program frequencies from other countries into my Uniden scanner?
Most Uniden scanners sold in the United States are locked to U.S. frequency ranges and cannot receive frequencies outside those ranges. Some models sold internationally can be modified, but this requires opening the unit and is not recommended unless you have electronics experience. Stick to frequencies within your scanner's published range.
What is the difference between a frequency and a channel?
A frequency is the radio wavelength (like 460.1250 MHz). A channel is the slot in your scanner where you store that frequency (like Channel 1, Channel 2). You can program up to 100 or more channels depending on your model, and each channel holds one frequency.
Do I need a license to listen to police and fire frequencies?
No. In the United States, listening to most public safety frequencies is legal without a license. You cannot transmit on those frequencies without a license, but receiving is not regulated. Some frequencies, like cell phones and cordless phones, are illegal to listen to even with a scanner—your manual will note which bands are restricted in your area.
Why do some frequencies sound like digital noise instead of voices?
Many agencies now use digital radio systems like P25 or DMR instead of analog FM. Standard Uniden scanners cannot decode digital transmissions—they will sound like static or chirping. If you want to monitor digital frequencies, you need a scanner that specifically supports P25 or DMR, like the BC125AT with a firmware update or the BC346XT.
Can I program the same frequency into multiple channels?
Yes. Some users program the same frequency into different banks so they can monitor it with different tone settings or organize it by agency. This uses extra channel slots but does not cause any problems with the scanner.