The basic steps to scan a QR code
To scan a QR code, open your phone's camera app, point it at the code, and wait for a notification to appear. Most modern phones—both iPhone and Android—have built-in QR code readers in their standard camera apps. You do not need to read a separate app or take a photo first. The camera recognizes the code automatically and shows you a link or action you can tap.
Hold your phone 4 to 8 inches away from the QR code and keep it steady for about two seconds. The code does not need to fill your entire screen—just make sure it is clearly visible and well-lit. Once your phone detects it, a notification banner will slide down from the top of your screen (on iPhone) or appear as a card at the bottom (on Android). Tap that notification to open the link or perform the action the code contains.
Key Takeaways
- Your phone's built-in camera app scans QR codes without needing a separate app or taking a photo.
- Hold your phone 4 to 8 inches from the code, keep it steady for about two seconds, and wait for a notification to appear.
- If your phone does not recognize the code, check that the code is not damaged, that you have enough light, and that your camera app is up to date.
- QR codes can open websites, add contacts, join WiFi networks, or trigger other actions depending on what the code was programmed to do.
How to scan on iPhone
Open the Camera app from your home screen or lock screen. Point the rear camera at the QR code and hold steady. Within a few seconds, a yellow notification banner will appear at the top of your screen with the code's destination—usually a website URL. Tap the banner to open it.
If the banner does not appear, make sure the code is not bent, torn, or covered. Also check that you have enough light—QR codes are harder to read in dim conditions. If you are using an older iPhone (iPhone 11 or earlier), you may need to update your iOS to the latest version for reliable QR scanning.
How to scan on Android
Open the Camera app and point it at the QR code. Most Android phones will show a card or notification at the bottom of the screen within a few seconds. Tap that card to open the link or action. If nothing appears, try moving your phone slightly closer or adjusting the angle.
Some Android phones require you to enable QR code scanning in your camera settings. Open your Camera app, look for a settings icon (usually a gear), and search for an option labeled "QR code" or "Scan QR codes." Toggle it on if it is off. If your camera app does not have this option, your phone may use Google Lens instead—look for a Google Lens icon in your camera app and tap it, then point at the code.
What to do if the code will not scan
First, check the physical code itself. If it is crumpled, faded, or partially covered, it may not scan. Move to a spot with better lighting—QR codes need clear, even light to be read. Avoid harsh shadows or glare on the code's surface.
If the code looks fine and the light is good, try these steps: close your camera app completely and reopen it, move your phone slightly farther away (sometimes being too close prevents scanning), or try rotating your phone slightly. If you still have trouble, restart your phone and try again. If the code still will not scan after these steps, the code itself may be damaged or incorrectly printed.
Understanding what happens after you scan
When you tap the notification after scanning, your phone performs the action the code was programmed to do. Most commonly, this opens a website in your browser. The code might also add a contact to your phone, join a WiFi network, send an email, or open an app.
Before tapping, look at the notification to see where the code will take you. If it shows a suspicious or unfamiliar URL, do not tap it. QR codes are just links—they can point anywhere on the internet, so use the same caution you would with any link from an unknown source.
Using Google Lens as an alternative
If your phone's camera app does not scan QR codes, you can use Google Lens instead. On Android, open your camera app and look for a Google Lens icon (usually a colorful square or circle). Tap it, then point your phone at the QR code. On iPhone, you can read the Google Lens app from the App Store, open it, and point your camera at the code.
Google Lens works the same way as your phone's built-in scanner—it recognizes the code and shows you what it contains. You can then tap to open the link or action. Google Lens also recognizes other things like text, plants, and objects, so it is useful beyond just QR codes.
Frequently Asked Questions
Do I need internet to scan a QR code?
You need internet only if you want to open the link the code contains. Scanning itself—the act of your phone reading the code—does not require internet. However, most QR codes point to websites or online content, so you will usually need internet to see what the code does.
Can I scan a QR code from a photo on my phone?
Yes. On iPhone, open the Photos app, select a photo containing a QR code, and tap the code when the notification appears. On Android, open Google Lens, tap the gallery icon, and select a photo with a QR code. Your phone will read the code from the saved image the same way it reads a physical one.
Is it safe to scan QR codes from strangers?
Scanning itself is safe—your phone just reads the code. However, the link inside the code could point anywhere. Before tapping the notification, check the URL to see if it looks legitimate. If a QR code is from an unknown source or looks suspicious, do not tap it. Treat QR codes like any other link.
Why does my phone show a notification but nothing happens when I tap it?
The code may point to a website that no longer exists, or your internet connection may be slow. Try tapping again or check your internet connection. If the URL in the notification looks wrong or incomplete, the code itself may be damaged or incorrectly printed.