The Basic Steps to Scan Something
Scanning turns a physical document or photo into a digital file on your computer. The process is the same whether you're scanning a letter, receipt, or old photograph: place the item in the scanner, open the scanning software on your computer, choose your settings, and press scan. The scanner reads the image and saves it as a file you can email, print again, or store.
Most home scanners connect to your computer through a USB cable. When you plug in the scanner, your computer automatically installs the driver software — the instructions that let your computer talk to the scanner. Once that's done, you're ready to scan.
Key Takeaways
- Place your document face-down on the glass or face-up in the automatic feeder, depending on your scanner model.
- Open the scanning software that came with your scanner, not a generic program, because it gives you the most control over quality and file type.
- Choose your resolution (300 DPI for documents, 600 DPI or higher for photos) and file format (PDF for documents, JPG for photos) before scanning.
- The scan takes 10 to 30 seconds; your computer will show you a preview so you can rescan if the image came out crooked or too dark.
- Save the file with a clear name in a folder you can find later, not in your Downloads folder where it will get lost.
Preparing Your Document or Photo
Before you scan, clean the glass surface of your scanner with a soft, dry cloth. Dust or fingerprints will show up in your scan and make the image look blurry or spotted. If your scanner has an automatic document feeder (the slot at the top where you stack pages), make sure the pages are straight and not stuck together.
Check that your document lies flat. If you're scanning a photo from an old album, a bent corner or crease will show in the final image. For bound documents like a book page, open it as flat as you can — some scanners have a lid that lifts high enough to accommodate thicker items.
If you're scanning something valuable, like an old photograph or important letter, do a test scan on a similar item first. That way you can check the settings and quality before you scan the original.
Opening Your Scanner Software and Choosing Settings
Don't use the generic scanning tool that came with Windows or Mac. Instead, open the software that came with your scanner — it's usually called something like "Canon Scan" or "Epson Scan" and sits in your Applications folder (Mac) or Programs menu (Windows). This software gives you control over resolution, file type, and color mode.
Resolution is measured in DPI (dots per inch) and controls how sharp your scan looks. For text documents, 300 DPI is standard and creates a file that's sharp enough to read but not huge. For photographs, use 600 DPI or higher so you capture fine detail. Higher resolution makes larger files, so don't use 1200 DPI unless you're scanning something you plan to print large.
File format determines what kind of file you get. PDF works best for documents because it preserves the layout and looks the same on any computer. JPG works best for photos because the file stays small. If you need to edit the scan later in a word processor, ask for a searchable PDF — the software will read the text and let you copy it.
Color mode has three choices: color, grayscale, and black-and-white. Use color for photographs. Use grayscale for documents with some shading or color text. Use black-and-white only for straightforward text documents, because it makes the file tiny but loses any detail.
Running the Scan and Checking the Preview
Place your document face-down on the glass (or face-up in the automatic feeder if your scanner has one). Close the lid gently — don't slam it. Click the "Preview" or "Scan" button in your software. The scanner will make a whirring sound for 10 to 30 seconds while it reads the image.
A preview window will pop up showing you what the scan looks like. Look for three things: Is the image straight, or is it tilted? Is it dark enough to read, or too light? Are all four edges of your document visible, or did part of it get cut off? If any of these are wrong, adjust your settings and scan again. It's faster to rescan now than to fix it later.
If the image is too light, increase the brightness or contrast in your software before you scan again. If it's tilted, straighten the document on the glass and try once more. Most scanners let you rotate the final image, but it's easier to get it right the first time.
Saving Your Scanned File
Once the preview looks good, click "Scan" or "Save" to create the final file. Your software will ask you where to save it and what to name it. Don't just accept the default name like "scan001" — use a name that tells you what the document is, like "tax_return_2024" or "car_insurance_policy".
Create a folder for your scans if you don't have one already. A folder called "Scanned Documents" in your Documents folder is better than letting scans pile up in Downloads, where they get mixed with other files and are straightforward to lose. If you scan a lot of documents, organize them by year or category.
After the file saves, open it to make sure it looks right. If the text is blurry or the image is cropped wrong, you can delete it and scan again while your document is still on the glass.
Scanning Multiple Pages
If your scanner has an automatic document feeder, you can stack multiple pages and scan them all at once. Load the pages face-up in the feeder, make sure they're aligned and not stuck together, and tell your software to scan multiple pages. The scanner will pull each page through and create separate files or combine them into one PDF, depending on your settings.
If your scanner doesn't have a feeder, you'll scan one page at a time. Scan the first page, save it, then place the next page on the glass and scan again. Some software lets you add pages to the same PDF file, so you end up with one document instead of many separate files. Check your software's menu for an option like "Add Page" or "Append".
For long documents, scanning one page at a time takes patience, but it's more reliable than a feeder because you control the placement of each page. If a page comes out crooked, you can rescan just that one without redoing the whole stack.
Troubleshooting Common Scanning Problems
If your scanner isn't showing up in your software, the USB cable may be loose or the driver didn't install. Unplug the scanner, wait 10 seconds, and plug it back in. If that doesn't work, restart your computer — sometimes the driver needs a restart to load properly.
If your scans come out too dark or too light, the glass may be dirty, or your brightness setting may be wrong. Clean the glass with a soft cloth and try scanning again. If the image is still too dark, open your software's settings and increase the brightness slider before you scan.
If text looks blurry, your resolution may be too low. Try scanning again at 300 DPI instead of 150 DPI. If the file is huge, you may have scanned at too high a resolution — 300 DPI is almost always enough.
If the image is cropped or cut off at the edges, the document wasn't placed straight on the glass. Straighten it and scan again. Some software has a "crop" tool that lets you trim the edges after scanning, but it's easier to get it right the first time.
Frequently Asked Questions
Can I scan directly to my phone or tablet?
Some newer scanners have WiFi and come with a mobile app that lets you scan wirelessly. Older USB-only scanners cannot. Check your scanner's manual or the manufacturer's website to see if a mobile app is available. If not, you'll need to scan to your computer first, then transfer the file to your phone.
What's the difference between scanning and photocopying?
A photocopier scans a document and prints it when ready on paper. A scanner scans a document and saves it as a digital file on your computer instead. If you want a paper copy, you scan first and then print the digital file. Scanning gives you more control over quality and lets you store the document forever without taking up shelf space.
Do I need special software to scan, or can I use what came with Windows?
The built-in Windows or Mac scanning tool works, but the software that came with your scanner gives you much more control. Use the manufacturer's software — it's free and designed specifically for your scanner model. The built-in tool is fine for quick scans, but you'll get better results with the real software.
How do I scan something that's too big for the glass?
If your document is larger than your scanner's glass (like a poster or large photo), scan it in sections. Scan the top half, then the bottom half, and save them as separate files. You can use free software like IrfanView or online tools to stitch the images together into one file, though the seam will be visible.
What file format should I use if I want to edit the scan later?
PDF is best for most edits because it preserves the layout. If you need to change text, ask your scanner software for a searchable PDF or OCR (optical character recognition), which converts the image to actual text you can edit. JPG is harder to edit because it's a picture, not text. For photos you want to edit in Photoshop, use JPG or TIFF.